Floor Screeding Newhaven

Newhaven Screeding & Floor Levelling Services

Floor Screeding Newhaven East Sussex (BN9): When you are upgrading your Newhaven property with damaged or uneven floors, or maybe converting a cellar or basement into a useable living space, an experienced floor screeding company can provide you with a good starting point. Before you're able to lay a suitable floor covering, whether it's carpet, wood or tile, the surface of the floor should be as flat as is possible; which is why screeding a floor is needed. The screeding is a crucial process to ensure a durable and quality finish to the whole floor surface.

Free Newhaven Floor Screeding Quotes


It does not matter how small or large the area you need levelling, a trustworthy screeding company in Newhaven will have the essential equipment, expertise and know-how to offer you an outstanding standard of service. They will be able to advise you about the right sort of screed that your project requires, and how best to apply and install it.

Floor Screeding Newhaven East Sussex (BN9)

It may be necessary, depending on the intended use of the area, for a structural engineering survey to conform with building regulations on flex strength, point loadings and load bearing of the screed floor.

A qualified and skilled work force is imperative for a successful outcome and will extend your floor's lifespan by making use of the right type of screed for your room's allocated purpose. Selecting the correct screeding materials and the method of installation is critical if you want to end up with a durable and quality finish for your floor surface.

Make certain that you get two or three quotations for your Newhaven floor screeding project and also ask what standard of finish each price quote is for. The Surface Regularity (SR) finish is the figure to look for when reviewing a quotation from Newhaven screeding companies. SR2 and SR3 may be more affordable options, but the floor screeding finish might have errors and deviations, whilst SR1 guarantees a pretty much perfect finish. This means that you might have to rectify any areas that could cause issues when putting down your final flooring solution.

Floor Screeders Newhaven (01273)

Every Newhaven screeding company has to stick to British Standards (BS8204) and ought to have some kind of accreditation from the manufacturers of screeding materials and equipment, for instance Flowcrete, Gypsol, Cemfloor. A contractor holding accreditations demonstrates that they've been trained and assessed in using these screeding products and can offer a high quality standard in all aspects of their installation.

For larger screeding projects in schools, factories, warehouses, hospitals, shops and restaurants, skilled commercial screeders in Newhaven will be required.


Standard Screeds - A combination of cement and sand which is perfect for everyday domestic use. This mix comprises a 5:1 ratio of sand to cement. This five to one ratio standard flooring screed will dry out at a rate of one millimetre per day after applying.

Fibre Reinforced Screed - The favourite choice of professional contractors for use in combination with under floor heating systems. The special fibres in this screed mix increase it's durability and strength whilst also protecting against thermal cracking and shrinkage. At approximately 1mm per day, it has the same setting rate to standard floor screed.

Polymer Screeds - These provide an extremely high level of strength with a reduced thickness. Polymer screeds are made by many manufacturers and on account of their different chemical compositions have specific setting times for each product.

Screeding Quotes Newhaven East Sussex

Industrial and Heavy Duty Screed - Where levels of traffic are high or heavy loading of the floor is required, heavy duty screeds allow for maximum strength and durability.

Fast Drying and Advanced Drying Screeds - If you need to move forward urgently with the flooring on account of time restraints, this screed dries much quicker than standard flooring screeds. Drying out at a rate of 3-7mm, depending on the mixture, they're normally a fibre reinforced kind of screed and are perfect for flooring projects that have tight deadlines.

Liquid or Self-Levelling Screeds - A latex and cement formula which can produce the highest standard SR1 finish. It's primarily needed to provide a smooth, clean floor over the top of a poor quality or damaged substrate and enables all types of flooring materials to be used. The liquid screed can be poured to a thickness of just 1mm, but will still provide a high strength base for a wide variety of flooring finishes.


Good preparation is essential for a quality finished screed surface that will be hard wearing and durable. It is vital that all contaminants such as loose debris, grease, oil or paint is removed from the floor before pouring any screed, as these can affect the adhesion capability that a quality screed needs.

Screeding Near Newhaven (BN9)

If any cleaning products were used during this stage it is crucial to ensure that no residues of soaps or detergents are left on the surface and it's allowed to dry out naturally. It's essential to fix any cracks or crevices in the surface to avoid them being visible and "travelling" upwards into the freshly screeded floor. During a site survey the screeding company will be able to see what preparation work is required before any actual screeding work starts.

Before any screeding can be laid a DPM (damp proof membrane) must be put down to shield the screed and final flooring from dampness. There may be two or three layers of different thicknesses of polythene to act as barriers between the screed and the insulation layer.

A further air-tight barrier might be necessary if your house is in an area which is regarded as susceptible to radon. This could be as simple as an air-tight membrane, or in more serious situations a ventilation system will be installed under the screed to extract any inflow of radon gas from ground level.

Once these stages have been completed the screeders will put on a sealant or primer to the prepared base surface. Sealers and primers help with the bonding process and are special applications specifically designed for the kind of screed that is being used. Owing to their special nature, only certified screeders in Newhaven should be entrusted with using them correctly, safely and using equipment that's made for this task.

If you are going to be installing underfloor heating, this is the time that it will need to be properly laid out and installed. Insulation panels will be put in position and the heating pipes and cabling will be firmly mounted so there's no movement whilst the screed is applied. Warmth will be spread evenly across the floor in a skillfully fitted underfloor heating system, and coupled with it being an effective choice of heating, it is a great choice for many Newhaven home restoration projects.

Floor Screed Newhaven (01273)

The screeding can now be prepared on site and spread onto the base. Your screeding company will give you guidance and advice on which form of screed is best for your requirements, in line with your intended use of the room area. For quick drying and advanced screeds there will be at least 24 hours delay before it is able to be walked on, and a further seventy two hours minimum before any flooring material can be fitted. This time period is increased for standard and heavy duty screeds and the manufacture's instructions should be followed to the letter to create the optimum finish and longevity of the floor.

The SR level of your screed can be confirmed once it's solidified enough to be walked on. The test involves using a 2m straight edge laid on the floor surface and any fluctuations from true are measured.

  • SR1 - Deviations of 3 millimetres or less being measured over the whole floor area shows your screeding to be of the best quality and is specified as SR1.
  • SR2 - The normal standard flooring in commercial and industrial builds is normally SR2 and has a maximum deviation of 5 millimetres across the entire screeded floor.
  • SR3 - If the deviation around the room is ten millimetres or less the screed quality is categorised as SR3 and is highly suitable for garage and utility areas.

If your screeding has been laid with particular load bearing requirements in mind then a qualified structural engineer will be required to perform tests. The testing will ensure your new screed is viable for the load bearing requirements specified in the site survey. A "drop hammer test" will be performed on several areas of the screed and the outcomes documented. Only certified structural engineers observing the BS8204 regulations are allowed to carry out these tests and sign off on the structural safety of a screed floor. (Tags: Floor Screeding Newhaven, Floor Screed Newhaven, Floor Screeding Services Newhaven, Screeding Newhaven).

Floor screeding services are available in Newhaven and also in: South Heighton, Piddinghoe, Rottingdean, Denton, Seaford, Saltdean, Telscombe, Bishopstone, East Blatchington, Tarring Neville, Iford, Peacehaven, Lewes, Firle, Southease, Selmeston, and in these postcodes BN9 0QH, BN9 0NH, BN9 0AD, BN9 0JR, BN9 1AR, BN9 0JF, BN9 0PX, BN9 9BF, BN9 0HJ, BN9 0BB. Locally based Newhaven floor screeders will probably have the dialling code 01273 and the postcode BN9. Checking this should make certain that you access locally based floor screeding. Newhaven property owners are able to utilise these and lots of other flooring related services.

Book a Screeder in Newhaven UK

Latex Screed Newhaven

It is best to use a latex screeding when a level of flexibility is needed in the surface of a floor. Generally coming in 2 parts, latex screeds comprise a cementitious powder and a latex liquid additive. Latex screeds are quicker drying and more flexible than other types of screed, because the water that is normally used is replaced with the latex liquid.

This latex screed compound is used to level a subfloor before the final decorative surface is installed. Suitable for substrate of stone tiles, sand/cement, wood, asphalt and concrete, this gives a perfect surface for the application of adhesives which is resilient and smooth. Even where there is movement on your sub-floor, this type of screed will produce a crack-free, flexible finish.

When using a "floating" screed, i.e. when screed is being laid over the top of underfloor heating, depths of 50 to 75 millimetres may be necessary, and latex screeds aren't suitable for this purpose.

Related Tasks

Screeding Related Tasks Newhaven

There is a range of work that can be carried out by your local Newhaven floor screeding company including acoustic flooring in Newhaven, cheap screeding, fast-dry screeds, concrete pumping, latex floor screed, floor levelling, floor screeding tools, sand and cement screed, unbonded screed, conservatory screeding, industrial floor screeding Newhaven, granolithic screeding in Newhaven, rapid strength floor screeds, screed reinforcement, bonded screed, floor screeding, liquid screeds, bonded concrete screeding, waterproof screeding, structural screeds Newhaven, floor screed testing, residential floor screeding in Newhaven, damp proof membranes in Newhaven, concrete screeding, floating screed, and more floor screeding tasks. Listed are just an example of the duties that are performed by those installing floor screeding. Newhaven professionals will let you know their full range of services.

The Tools That You Will Need For Screeding a Floor

  • Knee Protectors
  • Shovel
  • Dappling Bar
  • Floor Profile
  • Straight Edge
  • Tape Measure
  • Gloves
  • Float
  • Trowel
  • Wheelbarrow
  • A Long Spirit Level

Floor Screeding Near Newhaven

Also find: Bishopstone floor screeding, Saltdean floor screeding, South Heighton floor screeding, Iford floor screeding, East Blatchington floor screeding, Lewes floor screeding, Firle floor screeding, Selmeston floor screeding, Tarring Neville floor screeding, Piddinghoe floor screeding, Seaford floor screeding, Telscombe floor screeding, Rottingdean floor screeding, Southease floor screeding, Peacehaven floor screeding, Denton screeding services and more. All these locations are serviced by companies who do screeding. Newhaven residents can get screeding price quotes by going here.

Floor Screeding Services Newhaven

Find Floor Screeding in Newhaven Here
Screeding Services in Newhaven East Sussex (01273)
  • Newhaven Floor Damp Proofing
  • Newhaven Fibre Reinforced Floor Screeding
  • Newhaven Screeding Services
  • Newhaven Screed Calculator Service
  • Newhaven Floor Screeding
  • Newhaven Floor Insulation
  • Newhaven Underfloor Heating Installations
  • Newhaven Floor Levelling
  • Newhaven Floor Screeding Advice
  • Newhaven Commercial Floor Screeding
  • Newhaven Liquid Screeds
  • Newhaven Fast-Dry Floor Screeding
  • Newhaven Cheap Screeding
  • Newhaven Domestic Screeding

Screeding Around Newhaven: Floor screeders were recently requested by folks living in Chestnut Way, Fullwood Avenue, Park Drive Close, Fort Rise, North Quay Road, Avis Way, Rectory Close, Southdown Close, Valley Dene, Newfield Lane, Avis Road, Folly Field, Dacre Road, Nore Road, Saxon Road, Rectory Road, Norman Road, Fort Road, Lee Way, Cloisters, The Crescent, Lower Place, Mount Close, Valley Road, Palmerston Road, Badgers Close, Robinson Road and these Newhaven postcodes: BN9 0QH, BN9 0NH, BN9 0AD, BN9 0JR, BN9 1AR, BN9 0JF, BN9 0PX, BN9 9BF, BN9 0HJ, BN9 0BB. Work was undertaken in these locations by experts in screeding. Newhaven home and property owners benefited from trusted and reliable floor screeding services in every case.

To read local information regarding Newhaven, East Sussex look here

Floor screeding in BN9 area, and dialling code 01273.

TOP - Floor Screeding Newhaven


(This screeding Newhaven page was written by Stephen Locke 30-06-2022)