Floor Screeding Lewes

Lewes Screeding & Floor Levelling Services

Floor Screeding Lewes East Sussex (BN7): When you're upgrading your Lewes property with damaged or uneven floors, or maybe converting a basement or cellar into a useful living space, a professional floor screeding company can offer you a good starting point. Floor screeding gives a smooth, level finish to a basic sub-base floor, and enables you to lay a suitable flooring material, (tiles, carpets, boards etc) on top of it. If you would like your floors to last a long time then floor screeding is the most important factor in any renovation or building task.

Free Lewes Floor Screeding Quotes

FLOOR SCREEDING CONTRACTORS LEWES

It doesn't matter how small or large the room is that you need to be levelled, a genuine screeding company in Lewes will have the essential knowledge, skills and equipment to offer you an excellent level of service. They will assess your project and figure out the appropriate type of screed you require and how best to apply it.

Floor Screeding Lewes East Sussex (BN7)

It might be necessary, according to the intended use of the area, for a structural engineering survey to abide by building regulations on point loadings, load bearing and flex strength of the screed floor.

Bringing in a skilled and qualified flooring specialist will ensure that you use the appropriate sort of screed for the room's intended purpose to extend the lifespan of your floor. There are numerous kinds of screeding and selecting the right mix and laying method is critical to create a quality floor that is hard-wearing and fit for purpose.

Ensure that you get at least two or three quotes for your Lewes based screeding project and also ask what standard of finish each quote is for. For domestic homes an estimate will generally be provided for an SR (Surface Regularity) standard of SR1 or SR2. Each of the three SR levels provide different levels of finish, with SR1 offering the best, with the least amount of deviation over the area of the floor. An SR2 or SR3 level could mean there will be ridges or flat spots that might cause problems when installing your final floor surface.

Floor Screeders Lewes (01273)

The rules and regulations laid down in the British Standards BS8204 must be observed by all Lewes floor screeding companies and they should also be certified by the manufacturers of specialist screeding materials (Flowcrete, Gypsol, Cemfloor etc.) to substantiate their competence and safe working practices. This accreditation program illustrates a contractor's high quality performance and training in the usage of a manufacturer's screeding products.

For larger screeding projects in warehouses, shopping centres, hospitals, factories, boutiques and schools, specialist commercial screeders in Lewes will be needed.

TYPES OF SCREED

Standard Screeds - A blend of sand and cement which is ideal for standard residential use. The standard screed is a mixture of five parts sand to one of cement. After being laid a standard flooring screed mix dries out at a rate of just 1mm/day.

Fibre Reinforced Screed - Mostly used with underfloor heating and is the recommended choice in such projects. This is because of the increased strength and protection against thermal shrinkage and cracking provided by the special fibres within the screed. At approximately one millimetre per day, it has a similar drying rate to standard floor screed.

Screeding Quotes Lewes East Sussex

Advanced Drying and Fast Drying Screeds - If you need to move forward urgently with the work on account of time limitations, this screed dries much faster than standard screeds. Drying out at a rate of 3-7mm/day, determined by the specialised mix, they're normally a fibre reinforced screed and are perfect for flooring projects that have tight deadlines.

Polymer Screeds - An extremely high strength solution where a reduced thickness is required. Maker's guidelines for curing times differ across the various product ranges.

Liquid or Self-Levelling Screeds - A cement and latex mixture which can produce the highest standard of finish to SR1 levels. This self-levelling compound provides a smooth and level surface over a rough substrate or damaged floor to allow all sorts of flooring materials to be laid. The liquid screed can be laid to a thickness of only one millimetre, but still provides a strong surface for a wide variety of flooring finishes.

Industrial and Heavy Duty Screed - Made for maximum durability and strength in places where traffic is expected to be high or heavy loading on the floor base is needed.

SCREEDING PREPARATION AND INSTALLATION

To make certain the screeding is of a high quality finish that is hard wearing and durable, time should be spent on preparing the area before any screed is poured. It's important that any contaminants such as paint, loose debris, grease or oil is removed from the floor before pouring any screed, because these can affect the adhesion capability that a good quality screed demands.

Screeding Near Lewes (BN7)

Any cleaning chemicals that are used in this process shouldn't leave any residues, and the floor base must be allowed to dry out naturally. It's essential to repair any crevices or cracks in the base to prevent them being reflected and "travelling" upwards into the newly screeded floor. During a site survey your Lewes screeding installer will notice what preparation work is needed before any actual screeding work commences.

To protect the flooring materials and screed layer from dampness rising up from the ground, a DPM (damp proof membrane) will have to be laid. There could be 2 or 3 layers of varying thickness polythene to act as a barrier between the insulation layer and screed.

If the area where you live is susceptible to radon then one additional barrier is required to prevent this harmful gas from entering via the ground. A simple air-tight membrane may be sufficient in areas with low radon measurements, but in more severe cases there might need to be a more complex extraction system to remove any harmful radon.

As soon as the base has been prepared and any membranes installed, a sealant or primer is then put on. These sealers and primers will make sure that the screed bonds properly to the base and help achieve a quality finished floor. Due to their specialist nature, only qualified screeding contractors in Lewes are capable of using them correctly, safely and using bespoke equipment for the task.

This is the time that underfloor heating can be laid out in the correct manner and installed. The cables and heating pipes are securely mounted on insulation panels to stop any movement and make sure that they're laid in the correct position. Underfloor heating is one of the most efficient ways to heat a room and a skillfully installed system should deliver even warmth in all areas of the floor.

Floor Screed Lewes (01273)

If you aren't fitting under floor heating the screed can now be prepared in situ and laid. Your use of the room will help the screeding company on what form of floor screed is best for your requirements. For advanced and quick drying screeds there'll be at least 24 hours delay before it can be walked over, and a further seventy two hours minimum before any flooring material can be fitted. Manufacturer's drying instructions for standard and heavy duty screeds must be observed so as to achieve a quality finish and provide a stable and long lasting surface.

You can assess the SR level of the finished screeding as soon as it is solidified enough to walk on. The standard SR test involves the use of a 2 mtr long straight-edge to check for any deviations in the floor surface.

  • SR1 - Over the whole screed area, if there are no deviations of more than 3mm from the straight-edge, then you have a top quality SR1 standard surface.
  • SR2 - If the screed deviates from the straight edge by five millimetres or less it is SR2 quality and is the standard for industrial and commercial projects.
  • SR3 - SR3 is basic utility standard where a perfect finish isn't required. This level can have a maximum permissible deviation of ten millimetres.

If your screeding has been installed with specific loading in mind then a structural engineer will be necessary to perform the tests. The testing will make sure that your newly laid screed is suitable for the load bearing requirements set down in the site survey. The screed could be subjected to a drop hammer test to gauge strength and flexibility in specific areas. Any screed floor that has point load requirements must be approved by a competent structural engineer heeding the BS8204 regulations. (Tags: Floor Screeding Lewes, Screeding Lewes, Floor Screeding Services Lewes, Floor Screed Lewes).


Floor screeding services are available in Lewes and also in: Wallands Park, South Malling, Cooksbridge, Offham, Stoneham, Isfield, Glyndebourne, Barcombe, Burgess Hill, Ovingdean, Southerham, Glynde, Falmer, Woodingdean, Ringmer, Sout, Southease, Laughton, and in these postcodes BN7 1HS, BN7 1PD, BN7 1BZ, BN7 1RH, BN7 1SY, BN7 1RS, BN7 1HZ, BN7, BN7 1QJ, BN7 1LN. Locally based Lewes floor screeders will probably have the postcode BN7 and the phone code 01273. Checking this out can ensure you access local floor screeding. Lewes homeowners will be able to utilise these and lots of other similar services.

Book a Screeder in Lewes UK

Latex Screed Lewes

When the characteristics of your floor's surface means that a level of flexibility is needed, it may be advantageous to use a latex self-levelling screed, as opposed to one with a more rigid finish. Latex screeds generally comprise 2 parts - a cement-based powder, and a liquid latex additive. The liquid latex additive actually replaces the water that would typically be used for mixing floor screed, and is more flexible and quicker drying than standard screeds.

Used in the levelling of subfloors, this latex product creates a surface for the installation of the final floor finish. Appropriate for substrate of asphalt, stone tiles, wood, concrete and sand/cement, this screed gives the ideal surface for the application of adhesives which is smooth and resilient. If your sub-floor has any movement in it, this latex screeding will still give you a flexible, crack-free finish, on which your final floor coverings can sit.

When installing a "floating" screed, for instance when a screed is being laid over the top of a membrane of thermal or acoustic insulation, thicknesses of 50mm-75mm may be required, and latex floor screeds aren't suited to this purpose. (Tags: Latex Floor Screed Lewes, Latex Screeding Lewes, Latex Screeds Lewes, Latex Screed Lewes).

Skip Hire Lewes

Skip Hire Lewes

Home improvements, property makeovers and even small-scale do-it-yourself projects are well known for the amount of waste which is produced and has to be gotten rid of. Whether or not lots of waste is generated by your screeding work will depend on the particular circumstances of your project, sometimes there will be lots of waste, other times not much at all. In many cases the tradesperson you're hiring will gladly remove the waste that's produced in the course of the project, but be warned - quite a few of them don't!

When there is quite a lot of waste, most homeowners in Lewes choose to hire a skip. You should be able to get a skip that's perfect for you, given that they come in a wide variety of sizes. The various sizes of skip include mini-skips, midi-skips, builders skips and roll-on-roll-off skips, and for different projects skip bags are also available.

To find a price for skip hire in Lewes CLICK HERE.

Related Tasks

Screeding Related Tasks Lewes

There is a range of work that can be accomplished by your local Lewes floor screeding company including basement screeding, substrate floor preparation in Lewes, floor noise reduction, flow screeding, conservatory floor screeding, concrete screeds, unbonded screed, polished floor screeding in Lewes, fibre reinforced floor screeding, concrete pumping, self-levelling floor screeding, floor levelling, floor screeding, structural screeds, floating screed, granolithic screeds, damp proof membranes, office floor screeding, lightweight screeding in Lewes, floor preparation, floor screeding tools, floor screed testing, rapid strength screeding Lewes, screed reinforcement in Lewes, screed testing & surveys, final floor finishes, liquid screeds Lewes, latex screeds, and more floor screeding tasks. These are just a few of the duties that are undertaken by those installing screeding. Lewes providers will let you know their full range of services.

Floor Screeding East Sussex

East Sussex Screeders Near Me

In East Sussex you will also discover: Rotherfield screeding, Buxted floor screeders, Barcombe screeding specialists, Telscombe floor screeding, South Chailey screeding specialists, Burwash Common floor screeders, Fairlight floor levelling, South Heighton screeding, Pevensey floor screeding, Wivelsfield screeding specialists, Westham floor levelling, Catsfield floor screeders, Burwash Common screeding specialists, Hollington screeding, Peacehaven floor levelling, Robertsbridge screeding specialists, Willingdon floor screeders, Friston screeding specialists, Ninfield screeding, Forest Row floor screeders, South Chailey floor levelling, Rottingdean screeding, Horam screeding, Barcombe screeding, Beckley floor screeding, Groombridge floor screeding, Ninfield floor screeding, Groombridge screeding. In every part of the East Sussex region you will be able to find screeding specialists who'll offer you various services for your screeding requirements. If you cannot find a suitable screeding specialist in Lewes itself then you should not have any problems finding a decent one someplace nearby.

LEWES FLOOR SCREEDING QUOTES (BN7)

Floor Screeding Near Lewes

Also find: Barcombe floor screeding, Cooksbridge floor screeding, Burgess Hill floor screeding, Falmer floor screeding, Wallands Park floor screeding, Sout floor screeding, Glynde floor screeding, Southease floor screeding, Ringmer floor screeding, Glyndebourne floor screeding, Laughton floor screeding, Isfield floor screeding, Woodingdean floor screeding, Offham floor screeding, Stoneham floor screeding, Ovingdean floor screeding, South Malling floor screeding, Southerham screeding services and more. All of these towns and villages are catered for by companies who do floor screeding. Lewes business and home owners can get estimates by going here.

Floor Screeding Services Lewes

Find Floor Screeding in Lewes Here
Screeding Services in Lewes East Sussex (01273)
  • Lewes Underfloor Heating Installation
  • Lewes Screeding Services
  • Lewes Liquid Screeds
  • Lewes Screed Calculator Service
  • Lewes Cheap Floor Screeding
  • Lewes Floor Levelling
  • Lewes Floor Screeding
  • Lewes Screeding Advice
  • Lewes Commercial Floor Screeding
  • Lewes Residential Screeding
  • Lewes Polished Screed Floors
  • Lewes Floor Damp Proofing
  • Lewes Floor Insulation
  • Lewes Fast-Dry Screeding

Screeding Around Lewes: Households in St Andrews Place, Cricketing Bottom, Cranmer Close, Shepherd's Way, The Grange, The Lynchets, Bishops Lane, Station Street, Castle Ditch Lane, Bramleys, Springett Cottages, St Johns Street, Deanland Road, Chapel Road, Allington Road, St Pancras Gardens, Spithurst Road, Cluny Street, Coppernets, Toronto Terrace, Talbot Terrace, Ashcroft Close, St Swithuns Terrace, Sussex Terrace, Crockendale Field, The Fosse, have needed floor screeding just recently. Screeding work was also completed in the following local Lewes postcodes: BN7 1HS, BN7 1PD, BN7 1BZ, BN7 1RH, BN7 1SY, BN7 1RS, BN7 1HZ, BN7, BN7 1QJ, BN7 1LN. Work was conducted in these places by experts in screeding. Lewes property owners received high quality and reliable screeding services.

To obtain local information relating to Lewes, East Sussex go here

Floor screeding in BN7 area, (dialling code 01273).

TOP - Floor Screeding Lewes

HOME - FLOOR SCREEDING UK

(This screeding Lewes page was generated on 08-09-2022)