Floor Screeding Whitehaven

Whitehaven Screeding & Floor Levelling Services

Floor Screeding Whitehaven Cumbria (CA28): When you are upgrading your Whitehaven home with uneven or damaged floors, or perhaps converting a cellar or basement into a useable living space, an experienced floor screeding specialist will be able to help with your home improvements. Floor screeding delivers a smooth, level finish to a coarse sub-base, and allows you to lay a suitable flooring material, (tiles, boards, carpets etc) on top of it. The screed is a vital process to ensure a durable and quality finish to the whole floor structure.

Free Whitehaven Floor Screeding Quotes


It matters not how big or small the area you need to be levelled, a competent floor screeding specialist in Whitehaven will have the appropriate skills, know-how and equipment to give you an outstanding level of service. They will be able to advise you about the right sort of screed your project requires, and the best methods for applying and installing it.

Floor Screeding Whitehaven Cumbria (CA28)

It might be a requirement, according to the proposed use of the space, for a survey by a structural engineer to abide by building regulations on flex strength, load bearing and point loadings of the screed floor.

Skilled and qualified trades-people are essential to a successful result and will extend your floor's lifespan by using the correct form of screed for the intended purpose of your room. There are many kinds of screed and choosing the right mix and laying approach is crucial if you are to achieve a quality floor which is durable and fit for purpose.

Before picking out a screeding company from any operating in the Whitehaven area, ask to what standard of finish they're basing their quote, and also make certain that you get two or three quotations. For residential properties an estimate will normally be provided for an SR (Surface Regularity) level of SR1 or SR2. Each of the 3 SR levels provide different qualities of finish, with SR1 offering the best, with the smallest amount of deviation over the area. Any imperfections in the screeding can cause problems in laying flooring due to flat spots, indentations, ridges in the floor surface.

Floor Screeders Whitehaven (01946)

All Whitehaven screeding installers have to comply with British Standards (BS8204) and ought to have some kind of accreditation from screeding material and equipment manufacturers, e.g. Flowcrete, Gypsol, Cemfloor. The assessment and training of a floor screeding contractor by a manufacturer is underlined through the accreditation scheme, and gives assurances of reliability and safe working practices on any flooring project which involves their materials.

Whitehaven commercial screeders might be involved in screeding floors in warehouses, schools, factories, shops, hospitals and salons.


Standard Screeds - This is perfect for normal domestic use and is a mix of cement and sand. Five parts sand to one part cement is the normal mix for standard screed. After laying a standard flooring screed dries out at a rate of 1mm/day.

Screeding Quotes Whitehaven Cumbria

Industrial and Heavy Duty Screed - A screed that is designed for high load and heavy traffic areas where the maximum possible strength and durability is crucial.

Polymer Screeds - These provide a high level of strength with a minimal thickness. The curing times vary as outlined by proprietary product guidelines.

Self-Levelling or Liquid Screeds - When a high standard of finish is required this mixture of latex and cement is used to achieve SR1 level screed flooring. It is primarily used to provide a smooth, clean floor over a damaged or poor quality substrate and enables all types of flooring materials to be used. This liquid screed can be laid to a thickness of only 1mm, but will still provide a strong surface to take a selection of flooring finishes.

Fibre Reinforced Screed - Used mostly with underfloor heating systems and is the recommended choice in these projects. The increased strength and flex provided by the fibres within the screed help protect the flooring from cracking and shrinkage due to heat. It sets at the same rate as a standard screed of 1mm per day.

Fast Drying and Advanced Drying Screeds - If there's a need to press ahead urgently with the work because of time restraints, these screeds dry much faster than standard flooring screeds. Drying out at a rate of 3-7mm, subject to the specialised mix, they're normally a fibre reinforced screed and are great for projects that have tight schedules.


To enable the screeding to be of a good quality finish which is hard wearing and durable, time should be spent on carefully preparing the area prior to any screeding material being laid. It's important that all contaminants such as oil, loose debris, paint or grease is eradicated from the base before pouring any screed, because these can affect the bonding process that a good quality floor screed requires.

Screeding Near Whitehaven (CA28)

If any cleaning products were used during this stage it's important to ensure that no residues of detergents or soaps are left on the surface and it's allowed to dry out naturally. If screeding over a cement or stone floor any cracks should be repaired to stop them from "travelling" through your screed layer and producing imperfections on the finished floor surface. A skilled Whitehaven screeding contractor will pick up on such issues during the site survey and make sure that all preparations are complete before pressing on with the next steps in the floor screeding process.

A damp proof membrane (DPM) will be applied once the preparation work has been completed to stop ground moisture getting into the screed and floor materials. There could be 2 or 3 layers of different thicknesses of polythene to act as barriers between the insulation layer and screed.

An additional air-tight barrier may be required if your home is in an area which is known to be susceptible to radon gas. This could be as simple as an air-tight membrane, or in severe instances a ventilation system will be installed underneath the screed to draw out any inflow of radon gas from the ground.

As soon as these steps have been taken the screeding company will put on a primer or sealant to the prepared base. Sealers and primers assist with the bonding process and are specialist applications according to the sort of screed that's being applied. Owing to their special nature, only certified screeding specialists in Whitehaven are capable of using them correctly, safely and through the use of equipment which is made for the task.

Under floor heating can now be installed and tested before screeding is poured. Insulation panels will be put in position and the cables and heating pipes will be firmly mounted to prevent any movement while the screed is applied. When skillfully installed an under floor heating system is an efficient way to warm up a room and decent quality screed will retain its heat, producing an even level of warmth across the floor surface.

Floor Screed Whitehaven (01946)

The screed can now be mixed and prepared in situ and spread onto the base surface. Your screeding contractor will give you advice on which screed type is appropriate for your requirements, in line with your proposed use of the room. For quick drying and advanced screeds there will be at least twenty four hours delay before it is able to be walked over, and a further 3 days minimum before any flooring material can be fitted. If you're laying standard or heavy duty screeds the curing time is longer and the manufacturer's guidelines must be followed so as to get the best possible finish for your floor.

The SR standard of your screed can be confirmed once it has solidified sufficiently to be stepped onto. The basic SR test involves the use of a 2 mtr long straight-edge to check for any fluctuations in the floor surface.

  • SR1 - SR1 is the best specification and permits just 3 millimetres of deviation from the straight-edge.
  • SR2 - The normal standard flooring in commercial and industrial builds is classed as SR2 and has a maximum deviation of 5mm across the whole floor surface.
  • SR3 - If the deviation around the room is ten millimetres or less the screed quality is specified as SR3 and is the standard required for garage and utility areas.

If you need to check the screeded floor for load bearing, a qualified structural engineer is necessary to conduct the tests. This assessment will determine the overall strength of the screeding and its viability for the intended use. The screed could be given a "drop hammer test" to determine strength and flexibility at different points. Only experienced structural engineers obeying the British Standards BS8204 regulations are allowed to conduct these testing and sign off on the structural integrity of a screed floor. (Tags: Screeding Whitehaven, Floor Screed Whitehaven, Floor Screeding Whitehaven, Floor Screeding Services Whitehaven).

Screeding is available in Whitehaven and also in nearby places like: Bigrigg, Hensingham, Sandwith, Howman, Harras Moor, Frizington, Ennerdale Bridge, Mirehouse, Rottington, Moresby Parks, Arlecdon, Moresby, Distington, Parton, Moor Row, Bransty, and in these postcodes CA28 0BH, CA28 6EF, CA28 6ER, CA28 6HA, CA28 6ST, CA28 6AA, CA28 6JP, CA28 6JB, CA28 0BL, and CA28 6NE. Local Whitehaven floor screeders will probably have the postcode CA28 and the phone code 01946. Verifying this will guarantee that you're accessing locally based floor screeding. Whitehaven homeowners are able to benefit from these and lots of other flooring related services. Simply click the "Quote" banner to make enquiries and obtain floor screeding quotes.

Book a Screeder in Whitehaven UK

Latex Screeds Whitehaven

It is better to use a latex floor screed when a bit of flexibility is necessary in a floor's surface. Latex screeds usually comprise 2 parts - a cement-based compound, and a liquid latex additive. The water that is normally used in a screed mix is replaced by the liquid latex, meaning it's more flexible than standard screeds, and quicker drying.

Prior to the laying of the final decorative covering, this latex compound is used for levelling sub-floors. This is suitable for use on subfloors of sand/cement, wood, stone tiles, asphalt and concrete, to give a resilient and smooth surface that's perfect for the application of flooring adhesives. This type of screeding will produce a flexible, crack-free finish, even if there happens to be movement in your subfloor.

When an unbonded screed is being laid on top of a membrane of either thermal or acoustic insulation (i.e. a "floating" screed), latex flooring screeds aren't a suitable choice, because in this case (typically when screeding over underfloor heating), you'll likely require a screed thickness of 50-65mm. (Tags: Latex Screeds Whitehaven, Latex Screeding Whitehaven, Latex Floor Screed Whitehaven, Latex Screed Whitehaven).

Related Tasks

Screeding Related Tasks Whitehaven

There is a range of work that can be completed by your local Whitehaven floor screeding specialist including basement screeding, floor screeding quotes, structural screeds, screed reinforcement, self-levelling screeding, rapid strength floor screeds in Whitehaven, garage floor screeding, fibre reinforced floor screeding Whitehaven, underfloor heating installations, floor insulation Whitehaven, latex screeds, hospital floor screeding, screed flooring, bonded concrete screeding in Whitehaven, acoustic flooring Whitehaven, liquid screeds, anhydrite screed, floor repairs, floor screeding tools, concrete pumping Whitehaven, unbonded screed, floor preparation services, domestic floor screeding, underfloor heating screed, floor screed testing, and more floor screeding tasks. Listed are just an example of the activities that are handled by those specialising in screeding. Whitehaven providers will be happy to inform you of their full range of floor screeding services.

The Tools You Will Need For Screeding a Floor

  • Floor Profile
  • Humidity Tester
  • Trowel
  • Knee Protection
  • Measure
  • Float
  • Buckets
  • Spirit Level
  • Shovel
  • Straight Edge
  • Gloves

Floor Screeding Near Whitehaven

Also find: Howman floor screeding, Mirehouse floor screeding, Frizington floor screeding, Ennerdale Bridge floor screeding, Distington floor screeding, Parton floor screeding, Hensingham floor screeding, Sandwith floor screeding, Moor Row floor screeding, Moresby floor screeding, Bransty floor screeding, Bigrigg floor screeding, Moresby Parks floor screeding, Arlecdon floor screeding, Harras Moor floor screeding, Rottington floor screeding and more. These and other towns and settlements are serviced by screeding specialists and related tradespeople. The knowledge and expertise required to provide top-quality flooring solutions are possessed by these seasoned specialists. They are experts in screeding, making sure that the work is executed to the highest possible standards, whether it’s for residential or commercial properties. By clicking here, local home and property owners can get screeding estimates.

Floor Screeding Services Whitehaven

Find Floor Screeding in Whitehaven Here
Screeding Services in Whitehaven Cumbria (01946)
  • Whitehaven Floor Screeding
  • Whitehaven Floor Insulation
  • Whitehaven Underfloor Heating Installation
  • Whitehaven Liquid Screeds
  • Whitehaven Cheap Floor Screeding
  • Whitehaven Floor Screeding Advice
  • Whitehaven Floor Levelling
  • Whitehaven Industrial Screeding
  • Whitehaven Floor Damp Proofing
  • Whitehaven Fast-Dry Screeding
  • Whitehaven Fibre Reinforced Floor Screeding
  • Whitehaven Polished Screed Floors
  • Whitehaven Domestic Screeding
  • Whitehaven Screed Calculator Service

To obtain local information regarding Whitehaven, Cumbria check here

Floor screeding in CA28 area, (dialling code 01946).

TOP - Floor Screeding Whitehaven

CA28 - Floor Screeders Whitehaven - Self-Levelling Screeding Whitehaven - Floor Screeder Whitehaven - Fast-Dry Screeding Whitehaven - Floor Screeding Services Whitehaven - Floor Screeding Companies Whitehaven - Screeding Quotes Whitehaven - Domestic Screeding Whitehaven


(This screeding Whitehaven content was written on 19-06-2024)