Floor Screeding Clayton-le-Moors

Clayton-le-Moors Screeding & Floor Levelling Services

Floor Screeding Clayton-le-Moors Lancashire (BB5): If you have a damaged or uneven floor, are restoring a property or basement or are planning to install underfloor heating in your Clayton-le-Moors home, then it's the perfect time to think about contacting a floor screeding professional. To provide a level foundation for you final flooring material, screeding is used to create a smooth floor surface on top of a rough concrete sub-base. To guarantee a durable and quality finish to the entire floor structure, screed is an important component.

Free Clayton-le-Moors Floor Screeding Quotes


A professional floor screeding specialist in Clayton-le-Moors will have knowledge and experience to help you achieve a perfect floor in whatever size room you're renovating. They'll assess the project and figure out the appropriate sort of screed you require and the best technique for applying it.

Floor Screeding Clayton-le-Moors Lancashire (BB5)

It might be necessary, based on the intended use of the room, for a survey by a structural engineer to conform to building regulations on point loadings, load requirements and flex strength of the screed floor.

Bringing in a qualified and skilled flooring specialist will guarantee that you use the right type of screed for the room's intended purpose and get the maximum lifespan out of the resulting floor. A correct mix of screed and the methods used in laying it are also critical to guarantee the ultimate intergrity of your floor surface.

Before deciding upon a screeding company from the many operating in the Clayton-le-Moors area, ask to what standard of finish they're basing their quote, and also make sure you get two or three estimates. For domestic homes an estimate will usually be given for a Surface Regularity (SR) calculation of SR1 or SR2. SR1 is the best level, and whilst SR2 and SR3 may be less expensive at first glance, they do not guarantee a totally even or flat floor surface. An SR2 or SR3 standard could mean there are flat spots or ridges that might cause issues when putting down your final flooring surface (tile, wood, carpet etc).

Floor Screeders Clayton-le-Moors (01254)

The rules and regulations set out in in the British Standards BS8204 have to be observed by all Clayton-le-Moors floor screeding contractors and they must also hold accreditation with the manufacturers of specialist screeding materials (Gypsol, Cemfloor, Flowcrete etc.) to substantiate their safe working practices and competence. The assessment and training of a floor screeding company by a manufacturer is emphasised by the use of this accreditation scheme, and offers assurances of reliability and safe working practices on any flooring project which involves their materials.

Commercial screeders in Clayton-le-Moors will usually undertake screeding projects in warehouses, hospitals, factories, schools, shops and salons.


Standard Screeds - This is okay for basic domestic use and comprises a combination of sand and cement. This mix uses a 5 to 1 ratio of sand to cement. This 5 to 1 ratio standard screed will set hard at a rate of just one millimetre per day after applying.

Fibre Reinforced Screed - Used mostly with underfloor heating and is the preferred option in these projects. This is due to the improved durability and protection against thermal cracking and shrinkage offered by the special fibres within the screed mix. It's got a setting rate of one millimetre per day.

Polymer Screeds - When a reduced thickness of floor is needed on account of construction requirements, a polymer screed offers an extremely high strength solution to this problem. Owing to their different chemical compositions, these polymer screeds have varying curing times which can be verified by studying manufacturer's own product guidelines.

Screeding Quotes Clayton-le-Moors Lancashire

Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading of the floor is necessary, heavy duty screeds deliver maximum strength and durability.

Fast Drying and Advanced Drying Screeds - If you need to use the area in question as soon as possible a fast drying screed might be a good choice. Drying at a rate of three to seven millimetres, subject to the mixture, they're typically a fibre reinforced screed and are great for projects that have tight deadlines.

Self-Levelling or Liquid Screeds - When a high standard of finish is required this mix of of latex and cement is used to produce SR1 quality screed flooring. This is mainly used to provide a smooth, clean floor over a damaged or poor quality substrate and results in a surface finish onto which all kinds of flooring materials can be laid. This liquid screed can be poured to a thickness of only 1mm, but will still provide a high strength base to take a wide range of flooring finishes.


To make certain the screeding is of a high quality finish that is hard wearing and durable, time should be spent on preparing the area prior to any screed being laid. Any oil, grease, paint and debris on the existing floor surface can adversely affect the adhesion of the screed, and should be eradicated.

Screeding Near Clayton-le-Moors (BB5)

If cleansing products were used it's essential to remove any traces of detergent, soap etc, and allow the surface to dry naturally. It is vital to mend any crevices or cracks in the floor surface to prevent them being mirrored and "travelling" upwards into the newly screeded floor. During an on-site survey the screeding specialist will be able to see what preparation work is required before starting to work on the screeding.

Before the screeding can be poured a DPM (damp proof membrane) will have to be installed to shield the final flooring and screed from moisture damage. There could be two or three layers of different thicknesses of polythene to act as barriers between the screed and the insulation layer.

A supplementary air-tight barrier could be necessary if your home or business premises is in an area that's regarded as susceptible to radon gas. This can be just a simple airtight membrane, or in more serious instances a ventilation system will need to be installed under the floor screed to draw out any influx of radon gas from the ground.

The final stage of the surface preparation process is the painting or spraying of a primer or sealant. A primer assists in the screed to bond to the base and different varieties exist based on which type of screed is being used. Devices such as airless sprays can be used to apply a primer or sealant, by professional screeding installers in Clayton-le-Moors following the manufacturer's guidelines.

Under floor heating can now be laid out, installed and tested before screeding is poured. The heating pipes and cabling are firmly mounted on insulation panels to stop any movement and make sure they're laid in the correct position. Warmth is evenly spread across a floor area in a professionally installed under floor heating system, and in conjunction with it being an efficient choice of heating, it is an excellent choice for most Clayton-le-Moors home restoration projects.

Floor Screed Clayton-le-Moors (01254)

If you're not installing underfloor heating the screed will now be mixed and prepared in situ and poured. Your screeding contractor will have given you advice on which screed type is suitable for your requirements, according to your intended use of the room area. Don't forget that even quick drying and advanced screeds have a minimum of twenty four hours before you can walk over any laid surfaces and at least three days before any floor coverings can be laid. If you are looking to end up with a properly finished and long-lasting floor surface you must follow the manufacturer's guidelines with regard to standard and heavy duty screeds where this timescale will be longer.

You can test the SR standard of the completed screeding as soon as it is solidified enough for walking on. The test involves the use of a 2 mtr straight edge laid on the surface and any fluctuations from true are calculated.

  • SR1 - Disparities of three millimetres or less being measured across the entire floor area shows your screed to be of the finest quality and is specified as SR1.
  • SR2 - If the floor surface has a deviation from the straight-edge of 5 millimetres or less it is SR2 level and is the normal standard for industrial and commercial projects.
  • SR3 - If the deviation around the room is ten millimetres or less the screed quality is specified as SR3 and is fine for garage and utility areas.

If your screed floor has been installed with specific load bearing requirements in mind then a qualified structural engineer is going to be required to conduct the assessment. Using specialised equipment the engineer will establish the screeded surface strength and its suitability for use in a load bearing environment. This will include what's known as a drop hammer test which assesses various aspects of the strength and flexibility of the screed. Any screed flooring that's got point load requirements must be sanctioned by a qualified structural engineer respecting the British Standards BS8204 regulations. (Tags: Floor Screed Clayton-le-Moors, Floor Screeding Clayton-le-Moors, Floor Screeding Services Clayton-le-Moors, Screeding Clayton-le-Moors).

Floor screeding services are available in Clayton-le-Moors and also in nearby places like: Ormskirk, Altham, Rishton, Simonstone, Blackburn, Baxenden, Accrington, Whalley, Huncoat, Scaitcliffe, Ramsgreave, Rising Bridge, Cliffe, Great Harwood, Church, Altham West, and in these postcodes BB5 5JW, BB5 5ND, BB5 5TX, BB5 5PA, BB5 5UE, BB5 5RA, BB5 5NQ, BB5 5QL, BB5 5GP, BB5 5HJ. Local Clayton-le-Moors floor screeders will most likely have the postcode BB5 and the telephone dialling code 01254. Verifying this can make certain that you're accessing local floor screeding. Clayton-le-Moors home and business owners will be able to benefit from these and many other floor related services.

Book a Screeder in Clayton-le-Moors UK

Related Tasks

Screeding Related Tasks Clayton-le-Moors

There is a wide range of work that can be carried out by your local Clayton-le-Moors floor screeding specialist including structural screeds, floor noise dampening, decorative floor screeding Clayton-le-Moors, floor resurfacing, final floor finishes, sand and cement screed, polished floor screeding, floor screed testing in Clayton-le-Moors, professional floor levelling services in Clayton-le-Moors, screed reinforcement in Clayton-le-Moors, lightweight screeding in Clayton-le-Moors, floor screed repairs Clayton-le-Moors, floating screed, screeding advice, screed bathroom floors, unbonded screed, floor restoration Clayton-le-Moors, latex screeding, residential floor screeding, fast drying or accelerated screeds in Clayton-le-Moors, screed kitchen floors, cheap screeding, fibre reinforced floor screeding, flow screeding, floor screeding tools in Clayton-le-Moors, polished screed flooring, sand floor screeding Clayton-le-Moors, external screeding Clayton-le-Moors, anhydrite floor screeding, underfloor heating installations, and more floor screeding tasks. These are just a few of the activities that are carried out by those specialising in floor screeding. Clayton-le-Moors contractors will be delighted to keep you abreast of their whole range of services.

Tools Required by a Floor Screeding Specialist

  • Trowel
  • Tape Measure
  • Gloves
  • A Long Spirit Level
  • Floor Profile
  • Straight Edge
  • Wheelbarrow
  • Spade
  • Knee Protection
  • Float
  • Humidity Tester

Screeding Enquiries Lancashire

Floor Screeding Enquiries Lancashire

Recent Lancashire floor screeding posts: James Faulkner in Clayton le Dale, Lancashire was looking for a local floor screeding company to lay a self-levelling screed in three rooms of his property. Pixie Dobson recently enquired about the possibility of screeding a garage floor in Ribchester. Kiaan Molyneux and Safia Molyneux recently asked for a quotation for screeding an extension floor in Hutton. Emily Hinde recently enquired about the possibility of screeding a floor and installing underfloor heating in Clayton le Dale. Gabriela Clamp from Coppull was looking for local floor screeding companies nearby. Emilio Darlington recently requested an estimate for screeding a utility room floor in a terraced house in Whittingham, Lancashire. Mr and Mrs Mackay recently enquired about getting a price for screeding over an old concrete floor in Adlington, Lancashire. Ernie Beadle in Wesham, Lancashire asked the question "is there anyone who does floor screeding near me?". All of these people searched for "floor screeding Lancashire" and discovered this web page on either Yahoo, Google or Bing.

Skip Hire Clayton-le-Moors

Skip Hire Clayton-le-Moors

Sometimes it's hard to foresee the amount of waste that is going to be produced when undertaking property makeovers or home improvements in Clayton-le-Moors. Even though screeding is not one of those tasks that normally produces a lot of waste, that's not always the case, and it will depend on the scale of your particular installation. When you get your price quotes you should ask if the removal of waste has been included, otherwise you'll have to make arrangements to do this yourself.

Regardless of whether the tradesperson is sorting this out or you're doing it yourself, hiring a skip will often be the best solution for waste removal. If you've never rented a skip before, then you might not know that skips come in different sizes and volumes. Skips come in the following sizes: skip bags (1-1.5 yd³), mini-skips (2-3 yd³), midi-skips (4-5 yd³), builders skips (6-8 yd³), roll-on roll-off skips (20-25 yd³).

GO HERE and enter your details to get Clayton-le-Moors skip hire quotes.


Floor Screeding Near Clayton-le-Moors

Also find: Huncoat floor screeding, Cliffe floor screeding, Altham floor screeding, Simonstone floor screeding, Whalley floor screeding, Baxenden floor screeding, Altham West floor screeding, Rising Bridge floor screeding, Ramsgreave floor screeding, Scaitcliffe floor screeding and more.

Floor Screeding Services Clayton-le-Moors

Find Floor Screeding in Clayton-le-Moors Here
Screeding Services in Clayton-le-Moors Lancashire (01254)
  • Clayton-le-Moors Screed After Care
  • Clayton-le-Moors Floor Levelling
  • Clayton-le-Moors Floor Screeding
  • Clayton-le-Moors Screed Calculator Service
  • Clayton-le-Moors Screeding Services
  • Clayton-le-Moors Indistrial Screeding
  • Clayton-le-Moors Fibre Reinforced Floor Screeding
  • Clayton-le-Moors Floor Damp Proofing
  • Clayton-le-Moors Polished Screed Floors
  • Clayton-le-Moors Fast-Dry Floor Screeding
  • Clayton-le-Moors Liquid Screeds
  • Clayton-le-Moors Cheap Screeding
  • Clayton-le-Moors Underfloor Heating Installation
  • Clayton-le-Moors Floor Screeding Advice

Screeding Around Clayton-le-Moors: Households in Sparth Avenue, Collingwood, Bates Street, Albert Street, Owen Court, Brantwood, Water Street, Arthur Street, Beech Street, The Coppice, Wellington Street, Holme Road, Mill Entrance, Oak Street, Ann Street, Walmsley Court, Spring Hall, Brigsteer Close, Queen Street, Scott Street, Victoria Street, Charles Street, James Street, Canal Street, Daniel Street, Dunkenhalgh Way, Cottom Croft, have needed floor screeding just recently. Screeding work was also completed in these Clayton-le-Moors area postcodes: BB5 5JW, BB5 5ND, BB5 5TX, BB5 5PA, BB5 5UE, BB5 5RA, BB5 5NQ, BB5 5QL, BB5 5GP, BB5 5HJ. Work was undertaken in these locations by specialists in floor screeding. Clayton-le-Moors property owners enjoyed the benefits of high quality and reliable floor screeding services on each occasion.

If you want local Clayton-le-Moors information look here

Floor screeding in BB5 area, and dialling code 01254.

TOP - Floor Screeding Clayton-le-Moors

Domestic Screeding Clayton-le-Moors - Self-Levelling Screed Specialists Clayton-le-Moors - Screeding Quotes Clayton-le-Moors - Floor Screeding Contractors Clayton-le-Moors - Screeders Clayton-le-Moors - Floor Screed Contractors Clayton-le-Moors - Screeder Clayton-le-Moors - Quick-Dry Screeding Clayton-le-Moors - Screeding Clayton-le-Moors


(This screeding Clayton-le-Moors page was created on 18-09-2023)