Floor Screeding Barton-under-Needwood

Barton-under-Needwood Screeding & Floor Levelling Services

Floor Screeding Barton-under-Needwood Staffordshire (DE13): If you are renovating a property or cellar, have a damaged or uneven floor or are aiming to install underfloor heating, then you'll need to find a specialist floor screeding contractor to help you. Before you're able to lay a suitable floor covering, whether it's wood, tile or carpet, the surface of the floor should be as flat as is possible; which is why screeding a floor is often essential. To ensure a durable and quality finish to the whole floor surface, screeding is a key process.

Free Barton-under-Needwood Floor Screeding Quotes


Supplying the experience and proper working methods to generate the perfect base for your floors, a screeding specialist in Barton-under-Needwood can assist you with whatever size room you're renovating. They will be able to advise you about the right sort of screed your project requires, and how best to apply and install it.

Floor Screeding Barton-under-Needwood Staffordshire (DE13)

Your screeding company will also tell you if a structural engineer is needed for your project, to check on point loadings, flex strength and load bearing that your flooring may need to conform with current building regulations and British Standards.

A qualified and skilled work force is essential to a successful result and will extend the life of your floor by making use of the correct form of screed for your room's anticipated purpose. The correct mix of screed and the techniques used in laying it are also crucial to guarantee the final durability of your floor.

Ensure you get 2 or 3 estimates for your Barton-under-Needwood floor screeding project and also ask to what standard you are getting a quote. For domestic homes a quotation will usually be given for an SR (Surface Regularity) level of SR1 or SR2. SR2 and SR3 might be less costly options, although the finished floor surface could have errors and deviations, whilst SR1 guarantees a perfect finish. This means that you may need to rectify any areas that could cause problems when laying your finished flooring material.

Floor Screeders Barton-under-Needwood (01283)

The rules and regulations specified in the British Standards BS8204 have to be observed by any Barton-under-Needwood floor screeding contractor and they must also hold accreditation with the manufacturers of specialist screeding materials (Gypsol, Cemfloor, Flowcrete etc.) to confirm their competence and safe working practices. A company holding such accreditation indicates they have been assessed and trained in the use of these products and can offer a top notch service in all areas of their installation.

For the screeding of floors in schools, shopping centres, hotels, warehouses, hospitals and factories, skilled commercial screeders in Barton-under-Needwood will be needed.


Standard Screeds - A combination of cement and sand which is acceptable for basic residential use. 5 parts sand to 1 part cement is the typical mix for standard screed. Once laid this 5:1 ratio will dry at a rate of 1mm each day.

Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading of the floor is necessary, heavy duty screeds allow for maximum durability and strength.

Self-Levelling or Liquid Screeds - Used to produce a high quality finish, especially in SR1 levels of screeding, by a cement and latex formula. Mostly used to improve a poor substrate level or damaged floor to enable the laying of a brand new flooring surface, like tiling over the top of it. This liquid screed can be laid to a thickness of only one millimetre, but still provides a high strength surface for a selection of flooring finishes.

Advanced Drying and Fast Drying Screeds - If you need to progress urgently with the flooring on account of time limitations, this screed dries much faster than standard flooring screeds. Drying at a rate of 3-7mm/day, depending on the specialised mix, they are usually a fibre reinforced screed and are great for flooring projects that have tight schedules.

Screeding Quotes Barton-under-Needwood Staffordshire

Polymer Screeds - These provide a high level of strength with a minimal thickness. Because of their different chemical compositions, these have varying drying times which you can verify by reading manufacturer's product guidelines.

Fibre Reinforced Screed - Used mostly with under floor heating and is the preferred choice in such projects. The special fibres in this screed increase it's strength and durability whilst also safeguarding against thermal shrinkage and cracking. The screed will dry out at a rate of 1mm/day.


Good preparation is vital for a top quality screed surface that will be hard wearing and durable. The original floor surfaces should be cleaned to eliminate any oil, paint, debris and grease that might affect the adhesion of the screed.

Screeding Near Barton-under-Needwood (DE13)

Any cleansing chemicals that are used in this process shouldn't leave any residues, and the floor surface must be allowed to dry out naturally. At this stage any cracks need to be repaired because these can easily travel up through the laid screed and be reflected in the completed floor surface. An experienced Barton-under-Needwood screeding specialist will address such aspects during a on-site survey and make sure all preparations are complete before pressing on with the next stages of the floor screeding process.

A damp proof membrane (DPM) will be installed after the preparation work has been completed to prevent ground dampness getting into the flooring materials and screed. There may be 2 or 3 layers of different thicknesses of polythene to act as barriers between the screed and the insulation layer.

A further airtight barrier may be required if your home or business premises is in a location that is regarded as prone to radon. If radon gas occurs in severe doses then a full ventilation system may be installed underneath the screed which will remove any gases that could seep in from the ground.

Once these stages have been completed the screeding company will put on a sealant or primer to the prepared floor base. These sealers and primers will make sure the screed bonds successfully to the floor base and help to achieve a top quality finished floor. On account of their special nature, only certified screeding specialists in Barton-under-Needwood are capable of using them safely and correctly and through the use of bespoke equipment for the task.

If required, this is the time that underfloor heating can be installed and laid out in the correct way. The heating pipes and wires are securely mounted on insulation panels to prevent any movement and make sure that they're positioned correctly. When professionally installed an under floor heating system is an efficient way to warm a room and top quality screeding will retain its heat, generating an even level of warmth right across the floor.

Floor Screed Barton-under-Needwood (01283)

The screed can now be prepared in situ and spread onto the floor base. Your proposed use of the room will help the screeding company on which type of floor screed is ideal for your requirements. For quick drying screeds there'll be at least twenty four hours delay before it is able to be walked on, and a further 72 hours minimum before you can lay any flooring materials. If you're laying standard or heavy duty screeds the setting time is longer and the manufacturer's guidelines must be adhered to in order to get the best finish to your floor.

The SR level of your screed can be verified once it has solidified enough to be walked on. Using a 2 mtr straight-edge the floor surface is examined for any deviations, ridges and dips in the surface of the screed.

  • SR1 - Disparities of three millimetres or less being measured over the whole floor area shows your screed to be of the finest quality and specified as SR1.
  • SR2 - SR2 is for normal standard floors in industrial and commercial projects and can deviate from the straight-edge by up to five millimetres.
  • SR3 - If the deviation is ten millimetres or less the screeding quality is classified as SR3 and is the standard required for utility and garage areas.

There may also be a requirement for a qualified structural engineer to carry out a soundness test. This assessment will ascertain the overall strength of the screeding and the suitability for its proposed use. The screed layer should be given what is known as a drop hammer test to measure strength and flexibility at specific points. The specialist measurement and testing tools required mean that this can only be undertaken by a certified structural engineer heeding the British Standards BS8204 guidelines. (Tags: Screeding Barton-under-Needwood, Floor Screeding Barton-under-Needwood, Floor Screed Barton-under-Needwood, Floor Screeding Services Barton-under-Needwood).

Book a Screeder in Barton-under-Needwood UK

Screed Reinforcement

Screed reinforcement is employed to bolster the strength and durability of concrete screeds. Screeds are flat, thin layers of concrete that are applied to a base layer to create a level surface. While commonly used in building projects for flooring, they can also be utilised as a finishing layer for walls and ceilings.

Floor Screed Reinforcement

To prevent cracking and increase strength, reinforcement materials like steel mesh, wire or polypropylene fibres are mixed into the screed during installation. This reinforcement helps the surface to evenly distribute load and weight, as well as improve its ability to resist thermal changes, impact and abrasion.

Factors such as load capacity, thickness and finish play a role in the selection of reinforcement material for a project, which can vary according to precise requirements. To avoid displacement over time and ensure even distribution throughout the screed, the reinforcement must be correctly installed, which is vital. Screed reinforcement is a vital component in maintaining the structural integrity and quality of screeds, ensuring a long-lasting and reliable surface for many different applications.

Coloured Floor Screeds

The type of flooring material known as coloured screeds is usually found in commercial or industrial settings. The unique and decorative finish of these screeds is accomplished by mixing coloured resins, aggregates, and sealers together. In areas with machinery or heavy foot traffic, they are frequently utilised due to their ability to withstand wear and tear and provide a durable, slip-resistant surface.

Multi-coloured screeds can be customised to match a business brand, or to create a particular visual effect in a space. Facilities that demand a high standard of hygiene often prefer them due to their simple maintenance and cleaning requirements. Overall, a practical and versatile flooring solution, multi-coloured screeds can add both function and style to any industrial or commercial space.

Granolithic Screeding

Granolithic screeding is a process of creating a smooth and even surface for floor coverings like carpets or tiles. It involves mixing sand, cement, and aggregate such as marble or granite chips to form a mixture, which is then applied to a concrete sub-base. The mixture is levelled with a straight edge to give it a smooth, seamless surface.

Granolithic screeding is normally used in commercial and industrial buildings as well as in high-traffic areas in residential buildings. It is also commonly used in areas where abrasion and chemical resistance are needed. The resulting surface is hard and smooth, which makes it easy to clean and maintain, and provides an excellent base for other flooring materials.

The granolithic screeding process involves several steps, including preparation of the concrete sub-base, blending of the screed mixture, laying of the mixture, and curing of the screed. Proper mixing, curing and application methods are vital to guarantee the strength and durability of the final surface. Moreover, the screed should be allowed to cure fully before any flooring materials are installed over it.

What Does Screeding Do?

The use of screeding in construction projects serves several key purposes:

  1. Stability and Structural Integrity.
  2. Smoothing and Levelling.
  3. Load Distribution.
  4. Improving Sound and Thermal Insulation.
  5. Subfloor Corrections.
  6. Surface Protection.
  7. Compatibility with Floor Finishes.
  8. Support for Underfloor Heating Systems.

In a nutshell, the vital role of screeding is to create a durable, level and stable floor surface. Its role is to secure a solid foundation for the floor finish, allowing it to maintain its aesthetics and quality, and endure the demands of daily use for years to come.

Screed Floor Removal Barton-under-Needwood

The extraction and disposal of pre-existing screed from a surface form the core of screed floor removal. This is quite often necessary when renovating or upgrading a floor. Achieving the effective breakdown and removal of the screed layer in the removal process requires the use of specialised techniques and equipment. It permits the surface to undergo preparation for new flooring or other modifications. The efficient and safe removal of the old screed is assured by professional contractors skilled in screed floor removal, offering the floor a fresh start for upgrades, repairs or design variations. (33345)

Screeding Related Tasks

Screeding Related Tasks Barton-under-Needwood

There are a whole host of tasks that can be completed by your local Barton-under-Needwood floor screeder including underfloor insulation in Barton-under-Needwood, latex floor screeding, conservatory floor screeding, floor resurfacing, concrete screed, floating screed Barton-under-Needwood, fibre reinforced floor screeding, coloured floor screeding Barton-under-Needwood, anhydrite floor screed, smoothing compounds, screed testing & surveys, substrate floor preparation, lightweight floor screeding, acid etching concrete, sand and cement screeds, office floor screeding, screed pump hire, unbonded screed in Barton-under-Needwood, subfloor repair, structural screeds, floor restoration, screed floor removal, decorative floor screeding Barton-under-Needwood, flow screeding in Barton-under-Needwood, screeded bathroom floors, screeding quotes, underfloor heating installation, professional floor levelling services in Barton-under-Needwood, residential screeding in Barton-under-Needwood, screed flooring, commercial screeding, polished screed floors, basement screeding, acoustic flooring solutions Barton-under-Needwood, sand screeds, and lots more floor screeding tasks. Listed are just a handful of the tasks that are accomplished by those installing screeding. Barton-under-Needwood professionals will inform you of their entire range of services.

Floor Screeding Near Barton-under-Needwood

Also find: Barton Green floor screeding, Yoxhall floor screeding, Hoar Cross floor screeding, Drakelow floor screeding, Wychnor Bridges floor screeding, Rangermore floor screeding, Newchurch floor screeding, Needwood floor screeding, Rosliston floor screeding, Callingwood floor screeding, Efflinch floor screeding, Tatenhill floor screeding and more.

TOP - Floor Screeding Barton-under-Needwood

Floor Screeding Near Me - Industrial Screeding Barton-under-Needwood - Floor Screeder Barton-under-Needwood - Floor Screeding Barton-under-Needwood - Screeding Services Barton-under-Needwood - Screeding Barton-under-Needwood - Floor Screed Companies Barton-under-Needwood - Self-Levelling Screeding Barton-under-Needwood - Floor Levelling Services Barton-under-Needwood


(This screeding Barton-under-Needwood article was written on 18-09-2023)