Floor Screeding Kirkby-in-Ashfield

Kirkby-in-Ashfield Screeding & Floor Levelling Services

Floor Screeding Kirkby-in-Ashfield Nottinghamshire (NG17): A professional floor screeding company can help with renovations, level an uneven or damaged floor or help install under floor heating on your Kirkby-in-Ashfield home, when needed. A screed is used to produce a smooth floor over a rough concrete sub-base and provide a level base for your choice of top flooring material. If you want your floors to last a long time then a floor screed is one of the most important factors in any renovation or building task.

Free Kirkby-in-Ashfield Floor Screeding Quotes


It does not matter how big or small the room is that you need levelling, a professional screeding contractor in Kirkby-in-Ashfield will have the appropriate knowledge, skills and equipment to give you an outstanding standard of service. They'll assess the project and determine the correct sort of screed you need and how best to apply it.

Floor Screeding Kirkby-in-Ashfield Nottinghamshire (NG17)

Your screeding company will also tell you if a structural engineer is required for your undertaking, in order to check on point loadings, flex strength and load bearing that your flooring might require to conform with current building regulations and British Standards.

A skilled and qualified work force is imperative for a successful outcome and will extend the lifespan of your floor through the use of the right form of screed for your room's intended purpose. There are numerous kinds of floor screed and selecting the appropriate mix and laying approach is vital to create a top quality floor that is both durable and fit for purpose.

Before deciding on a screeding company from the many based in the Kirkby-in-Ashfield area, ask to what standard of finish they're basing their price quote, and also ensure you get two or three quotations. The SR (Surface Regularity) finish is the number to look for when getting a quote from Kirkby-in-Ashfield floor screeding contractors. SR1 is the highest quality, and while SR2 and SR3 may be less expensive initially, they don't guarantee a totally even or flat surface. Any error in the final screeding can cause problems in laying flooring due to flat spots, indentations, ridges in the floor surface.

Floor Screeders Kirkby-in-Ashfield (01623)

British Standards BS8204 sets down the guidelines and regulations that all Kirkby-in-Ashfield screeding companies are required to follow, and if using specialist screeding solutions, (Gypsol, Cemfloor, Flowcrete etc), they should be approved by the manufacturers as being trained and skilled in their use. This accreditation program highlights a company's ability and training in the use of a manufacturer's product.

Commercial screeders in Kirkby-in-Ashfield will usually undertake larger floor screeding projects in hospitals, shopping centres, boutiques, warehouses, schools and factories.


Standard Screeds - A mixture of cement and sand which is acceptable for everyday residential use. This mix comprises a five to one ratio of sand to cement. Once its been laid this 5:1 ratio will dry at a rate of 1mm per day.

Liquid or Self-Levelling Screeds - Used to provide the highest quality of finish, especially where SR1 levels are required, by a cement and latex solution. It's largely used to produce a smooth, level floor over the top of a damaged or poor quality substrate and results in a surface finish onto which all kinds of flooring materials can be laid. This liquid screed can be laid to a depth of just 1mm, but still provides a high strength base to take a selection of flooring finishes.

Fibre Reinforced Screed - The favoured choice by professional screeders for use in combination with under floor heating systems. The special fibres in the screed mix enhance it's durability and strength while also protecting against thermal cracking and shrinkage. At roughly 1mm per day, it has the same setting rate to standard screed.

Screeding Quotes Kirkby-in-Ashfield Nottinghamshire

Industrial and Heavy Duty Screed - Developed for maximum strength and durability in areas where traffic is expected to be high or heavy loading on the floor is necessary.

Polymer Screeds - Provides a high level of strength with a lower thickness. On account of their different chemical compositions, these screeds have varying drying times which can be verified by checking manufacturer's guidelines.

Advanced Drying and Fast Drying Screeds - If there is a need to use the area in question ASAP a fast drying screed may be used. They are normally a fibre reinforced kind of screed that dries out at a rate of between 3-7mm/day per day and are used in time-sensitive projects.


Screeding companies will need to prepare all areas before any other work so as to guarantee a hard wearing and quality screed flooring. The original floor surfaces should be thoroughly cleaned to eliminate any grease, oil, debris and paint that might affect the bond of the screeding.

Screeding Near Kirkby-in-Ashfield (NG17)

If cleaning products have been used it's important to remove any remnants of soap or detergent, and allow the surface to dry naturally. If screeding over a cement or stone floor then all cracks should be repaired to prevent them from "travelling" up through the screed layer and causing deviations on the final floor surface. An on-site survey will allow your Kirkby-in-Ashfield screeding installer to take note of this preparation work and complete it before starting to pour the screeding layer.

A DPM (damp proof membrane) will be installed once the preparation work has been done to prevent ground moisture getting into the flooring materials and screeding. There could be 2 or 3 layers of varying thickness polythene to act as barriers between the insulation layer and screed.

If the area where you live is at risk from radon then one additional barrier is essential to stop this harmful gas from entering via the ground. This can be as simple as an airtight membrane, or in more serious instances a ventilation system will be installed underneath the screed to take away any inflow of radon gas from ground level.

As soon as the floor base has been prepared and any DPMs installed, a sealer or primer is then put on. Primers help with the bonding process and are special applications according to the sort of screed that is being used. Custom-made equipment such as airless sprays can be used to apply a primer or sealant, by professional screeding contractors in Kirkby-in-Ashfield sticking to the manufacturer's guidelines.

Under floor heating can now be installed and checked before the screed is poured. The underfloor heating system is laid out in the correct pattern and firmly mounted on insulation panels to stop potential movement during screed installation process. Underfloor heating is one of the most effective ways to heat a room and a skillfully installed system should give an even warmth in all areas of the floor.

Floor Screed Kirkby-in-Ashfield (01623)

If you aren't putting in underfloor heating the screed can now be prepared on site and laid. Your proposed use of the room will help the screeding company on what type of floor screed is ideal for your needs. For advanced and quick drying screeds there will be at least a 24 hour delay before it is able to be walked on, and a further Three days minimum before any flooring material can be laid over it. If you are laying standard or heavy duty screeds the drying time is longer and you should follow the manufacturer's guidelines so as to get the best possible finish for your floor.

Once the screed has hardened it can be checked for quality to confirm the SR level. The test involves the use of a 2 mtr long straight-edge laid down upon the surface and any fluctuations from true are measured.

  • SR1 - Over the entire floor area, if there are no deviations of more than 3 millimetres from the straight-edge, then you have a top quality SR1 standard surface.
  • SR2 - SR2 is the classification for standard floors in commercial and industrial projects and can deviate from the straight-edge by up to 5mm.
  • SR3 - SR3 is utility standard where a perfect quality finish isn't necessary. This specification allows for a maximium deviation of ten millimetres.

If your screed has been installed with specific loading in mind then a structural engineer will be required to perform these soundness tests. Using specialist equipment the engineer will verify the screed strength and its suitability for use in a load bearing environment. This will include what is known as a drop hammer test which assesses various aspects of the strength and flexibility of the screed. The specialist measurement and testing tools mean that this can only be performed by a certified structural engineer respecting the guidelines of BS8204. (Tags: Floor Screeding Services Kirkby-in-Ashfield, Floor Screeding Kirkby-in-Ashfield, Screeding Kirkby-in-Ashfield, Floor Screed Kirkby-in-Ashfield).

Floor screeding services are available in Kirkby-in-Ashfield and also in: Blackwell, Hethwaite, Skegby, Pye Bridge, Nuncargate, Kirkby Woodhouse, Newstead Village, Selston, Ravenshead, Berry Hill, Underwood, Broadmeadows, Linby, Annesley, Pinxton, Sutton-in-Ashfield, and in these postcodes NG17 7JH, NG16 6JB, NG17 1NY, NG17 7LF, NG17 7PB, NG17 7DL, NG17 7AT, NG17 7HT, NG17 7JR, NG17 7FQ. Locally based Kirkby-in-Ashfield floor screeders will most likely have the postcode NG17 and the phone code 01623. Verifying this will ensure that you are accessing locally based floor screeding. Kirkby-in-Ashfield householders are able to benefit from these and numerous other floor related services.

Book a Screeder in Kirkby-in-Ashfield UK

Latex Floor Screeds Kirkby-in-Ashfield

When a certain degree of flexibility is needed in a floor's surface you may find that the application of a latex self-levelling floor screed will be best. A latex floor screed comes in two parts, a bag and a bottle, with the bag containing a cement based smoothing compound, and the bottle containing a liquid latex. Where water is normally used in a screed mix, this is replaced with the liquid latex, making it quicker drying and more flexible than other standard screeds.

This latex compound is used for levelling-out sub-floors in advance of the laying of your chosen decorative surface. This is suitable for use on subfloors of asphalt, concrete, wood, stone tiles and sand/cement, to give a resilient and smooth surface that's perfect for the application of adhesives. If your sub-floor has a bit of movement in it, this type of latex floor screed will still provide a crack-free, flexible finish, onto which your final floor coverings can be laid.

When an unbonded screed is being laid over a layer of either thermal or acoustic insulation (i.e. a floating screed), latex flooring screeds aren't a suitable choice, because in this case (usually when screeding on top of underfloor heating), you will likely need a thickness of 50mm-65mm. (Tags: Latex Screeds Kirkby-in-Ashfield, Latex Floor Screed Kirkby-in-Ashfield, Latex Screeding Kirkby-in-Ashfield, Latex Screed Kirkby-in-Ashfield).

Related Tasks

Screeding Related Tasks Kirkby-in-Ashfield

There are a number of different tasks that can be conducted by your local Kirkby-in-Ashfield floor screeding company including waterproof screeding Kirkby-in-Ashfield, final floor finishes, floor preparation in Kirkby-in-Ashfield, conservatory screeding, underfloor heating installation, cheap screeding in Kirkby-in-Ashfield, floor renovation Kirkby-in-Ashfield, screeding advice, flow screeding, rapid strength screeding, floor screeding tools Kirkby-in-Ashfield, bonded concrete floor screeding, floor levelling Kirkby-in-Ashfield, structural screeds, floor insulation, sand and cement screeding Kirkby-in-Ashfield, damp proof membranes, polished screed floors in Kirkby-in-Ashfield, sand screeding in Kirkby-in-Ashfield, industrial screeding, fibre reinforced floor screeding, screed testing & surveys in Kirkby-in-Ashfield, screeding repairs, lightweight screeding, garage floor screeding in Kirkby-in-Ashfield, warehouse floor screeding, unbonded screed, screeding price quotes Kirkby-in-Ashfield, and lots more floor screeding tasks. These are just some of the duties that are undertaken by those specialising in screeding. Kirkby-in-Ashfield companies will keep you informed about their whole range of services.

Floor Screeding Tools

  • Measure
  • Trowel
  • Spirit Level
  • Straight Edge
  • Wheelbarrow
  • Spiked Roller
  • Float
  • Shovel
  • Floor Profiler
  • Gloves
  • Knee Protectors

Floor Screeding Near Kirkby-in-Ashfield

Also find: Skegby floor screeding, Hethwaite floor screeding, Newstead Village floor screeding, Sutton-in-Ashfield floor screeding, Berry Hill floor screeding, Selston floor screeding, Underwood floor screeding, Pinxton floor screeding, Annesley floor screeding, Ravenshead floor screeding, Kirkby Woodhouse floor screeding, Pye Bridge floor screeding, Linby floor screeding, Nuncargate floor screeding, Broadmeadows floor screeding, Blackwell screeding services and more. All these villages and towns are served by companies who do floor screeding. Kirkby-in-Ashfield householders can get price quotes by clicking here.

Floor Screeding Services Kirkby-in-Ashfield

Find Floor Screeding in Kirkby-in-Ashfield Here
Screeding Services in Kirkby-in-Ashfield Nottinghamshire (01623)
  • Kirkby-in-Ashfield Floor Screeding
  • Kirkby-in-Ashfield Screeding Services
  • Kirkby-in-Ashfield Floor Screeding Advice
  • Kirkby-in-Ashfield Floor Insulation
  • Kirkby-in-Ashfield Indistrial Floor Screeding
  • Kirkby-in-Ashfield Screed Calculator Service
  • Kirkby-in-Ashfield Floor Levelling
  • Kirkby-in-Ashfield Underfloor Heating Installations
  • Kirkby-in-Ashfield Floor Damp Proofing
  • Kirkby-in-Ashfield Liquid Screeds
  • Kirkby-in-Ashfield Polished Screed Floors
  • Kirkby-in-Ashfield Domestic Floor Screeding
  • Kirkby-in-Ashfield Cheap Screeding
  • Kirkby-in-Ashfield Fast-Dry Screeding

Screeding Around Kirkby-in-Ashfield: Property owners who live in the following roads have just recently requested floor screeding services - Beverley Drive, Harebell Close, Hornbeam Way, Bourne Avenue, Gladstone Terrace, Betony Grove, Nest Crescent, Pinxton Green, Derby Road, St John's Avenue, Regent Street, Princess Street, Urban Road, Mawkin Lane, Ascot Close, Springmeadow, Tennyson Street, Campion Gardens, Grives Lane, Church Street, King Street, The Acre, Burrow Walk, Erewash Street, Cow Pasture Lane, as well as these Kirkby-in-Ashfield area postcodes: NG17 7JH, NG16 6JB, NG17 1NY, NG17 7LF, NG17 7PB, NG17 7DL, NG17 7AT, NG17 7HT, NG17 7JR, NG17 7FQ. These locations recently saw activity by experts in floor screeding. Kirkby-in-Ashfield home and property owners benefited from high quality and dependable floor screeding services on each occasion.

Screeding Jobs Kirkby-in-Ashfield: Get screeding jobs in Kirkby-in-Ashfield here: Screeding Jobs Kirkby-in-Ashfield

If you need local info on Kirkby-in-Ashfield, Nottinghamshire take a look here

Floor screeding in NG17 area, and dialling code 01623.

TOP - Floor Screeding Kirkby-in-Ashfield

01623 - Floor Screeder Kirkby-in-Ashfield - Floor Screeding Services Kirkby-in-Ashfield - Underfloor Heating Kirkby-in-Ashfield - Floor Screeding Kirkby-in-Ashfield - Floor Levelling Kirkby-in-Ashfield - Screeders Kirkby-in-Ashfield - Floor Screeding Quotations Kirkby-in-Ashfield - NG17


(This screeding Kirkby-in-Ashfield page was written on 08-09-2022)