Floor Screeding Hayes

Hayes Screeding & Floor Levelling Services

Floor Screeding Hayes Greater London (UB3): If you have a damaged or uneven floor, are restoring a property or cellar or are aiming to install underfloor heating, then you will need to find a professional floor screeding service to assist you. To provide a good base for you final flooring material, a screed is used to generate a smooth floor surface over a concrete sub-base. Floor screeding will provide a durable, quality floor surface for virtually any room.

Free Hayes Floor Screeding Quotes


An established screeding contractor in Hayes will have all the experience and know-how to help you achieve a perfectly finished floor in whatever size room you are renovating. After evaluating your project they will advise you about the perfect choice of screed and which strategy for applying it is most suitable for your circumstances.

Floor Screeding Hayes Greater London (UB3)

It might be a requirement, according to the intended use of the space, for a survey by a structural engineer to conform with building regulations on flex strength, load requirements and point loadings of the screed floor.

The skills and training that a certified screeding contractor brings to your project will guarantee a high quality outcome and help in extending the lifetime of your floor. A correct mix of screed and the way it is laid is also crucial to guarantee the ultimate intergrity of your floor surface.

Make sure you get two or three quotes for your Hayes based screeding project and also ask to what standard you are getting a quote. For residential homes an estimate will usually be given for a Surface Regularity (SR) calculation of SR1 or SR2. SR1 is the highest level, and whilst SR2 and SR3 may be less costly at first glance, they do not guarantee a perfectly even or flat surface. An SR2 or SR3 level may mean there are flat spots or ridges that might cause problems when laying your final floor surface.

Floor Screeders Hayes (020)

The guidelines and regulations laid down in the British Standards BS8204 have to be followed by any Hayes floor screeding company and they should also hold accreditation with the manufacturers of specialist screeding materials (Gypsol, Flowcrete, Cemfloor etc.) to confirm their competence and safe working practices. The testing and training of a screeding contractor by such manufacturers is emphasised by the use of this accreditation scheme, and offers assurances of reliability and safe working practices on any screeding project which involves their materials.

For larger floor screeding projects in schools, warehouses, hospitals, restaurants, shops and factories, specialist Hayes commercial screeders will be needed.


Standard Screeds - Widely used in domestic flooring projects where the blend of cement and sand is acceptable for regular floor traffic usage. The standard screed is a mix of 5 parts sand to 1 of cement. This 5 to 1 ratio standard screed will dry out at a rate of one millimetre per day after application.

Polymer Screeds - A high strength solution where a reduced thickness is needed. Polymer screeds are made by a number of manufacturers and due to their diverse chemical compositions have distinct drying times for each product.

Fibre Reinforced Screed - The favourite choice of professional installers for use with underfloor heating systems. This is because of the improved durability and protection against thermal shrinkage and cracking provided by the special fibres within the screed. The screed will set hard at a rate of 1mm/day.

Fast Drying and Advanced Drying Screeds - If you need to progress urgently with the flooring because of time restraints, this screed dries more speedily than standard screeds. Drying at a rate of 3-7mm, subject to the specialised mix, they are typically a fibre reinforced kind of screed and are perfect for flooring projects that have tight deadlines.

Screeding Quotes Hayes Greater London

Industrial and Heavy Duty Screed - Made for maximum durability and strength in areas where traffic is expected to be high or heavy loading on the floor is required.

Self-Levelling or Liquid Screeds - A latex and cement material which can achieve the highest standard of finish to SR1 levels. This self-levelling compound provides a smooth and level surface over a damaged floor or rough substrate to enable all kinds of flooring materials to be laid. The liquid screed can be poured to a thickness of only 1mm, but will still provide a high strength surface to take a selection of flooring finishes.


Good preparation is vital for a top quality screed surface that will be durable and hard wearing. The original floor surface should be cleaned to remove any paint, oil, debris and grease which can adversely affect the adhesion of the screeding.

Screeding Near Hayes (UB3)

Any cleaning products that are used in this process shouldn't leave any residues, and the floor base must be allowed to dry by itself naturally. If screeding over a stone or cement floor then all cracks should be mended to stop them from "travelling" up through a screed layer and producing deviations on the final surface. A competent Hayes screeding contractor will pick up on such problems during a site survey and make certain that all preparations are completed before applying the next steps in the screeding process.

A DPM (damp proof membrane) will be put down once the preparation work has been concluded to prevent ground dampness getting into the flooring materials and screeding. The damp proof membrane is made out of thick polythene and various layers may be used to act as a moisture barrier for the screeding.

If the area is susceptible to radon then another barrier is necessary to prevent this harmful gas from entering via the ground. This can be as simple as an air-tight membrane, or in more serious instances a ventilation and extraction system will need to be installed under the screeding to take away any influx of radon gas from ground level.

Once these steps have been taken the screeding company will apply a sealer or primer to the prepared base. A primer assists in the screed bonding correctly to the base and membranes and different varieties exist based upon which type of screed is being used. These products need skilled tradesmen to apply them in the appropriate proportions by using airless sprays and other bespoke equipment.

Now is the time that under floor heating can be installed and laid out in the correct way. The heating pipes and cables are securely mounted on insulation panels to prevent any movement and make sure they are laid in the correct position. Warmth will be spread evenly across the floor in a professionally installed underfloor heating system, and with it being an effective method of heating, it is a great choice for most Hayes renovation projects.

Floor Screed Hayes (020)

Naturally, if you are not fitting underfloor heating, you simply bypass this step and apply the screeding. Your proposed use of the room will assist your screeding contractor on what type of screed is appropriate for your needs. Bear in mind that even quick drying screeds have a minimum of twenty four hours before you are able to walk on any screeded surfaces and at least 3 days before any floor coverings can be laid. If you are hoping to end up with a well finished and hard-wearing floor surface you must follow the manufacturer's guidelines with regards to heavy duty and standard screeds where this time period will be longer.

You can check the SR standard of the completed screeding once it is set enough for walking on. The basic SR test uses a two metre long straight-edge to check for any deviations in the screeded surface.

  • SR1 - Disparities of three millimetres or less being measured over the whole area shows your screed floor to be of the highest quality and categorised as SR1.
  • SR2 - The standard flooring in commercial and industrial builds is classed as SR2 and has a maximum deviation of 5mm across the entire screed.
  • SR3 - SR3 is utility standard where a perfect quality finish isn't needed. This specification allows for a maximium deviation of 10 millimetres.

There might also be a requirement for a qualified structural engineer to do a soundness test. This assessment will determine the strength of the screed and the suitability for its intended use. A "drop hammer test" will be conducted on several areas of the screed layer and the results noted. The precise measurement and testing tools mean this can only be carried out by a competent structural engineer applying the BS8204 guidelines. (Tags: Screeding Hayes, Floor Screeding Hayes, Floor Screed Hayes, Floor Screeding Services Hayes).

Screeding services are available in Hayes and also in: Upper Elmers End, South Ruislip, Cowley, Goulds Green, Hayes End, Colham Green, Yiewsley, Bickley, Sipson, Cranford, Harlington, and in these postcodes UB3 1NA, UB3 1JJ, UB1 2PQ, UB2 5YQ, UB3 1AW, UB1 1WQ, UB3 1BL, UB3 1LP, UB11 1JA, and UB3 1BQ. Locally based Hayes floor screeders will most likely have the dialling code 020 and the postcode UB3. Checking this can ensure that you're accessing local floor screeding. Hayes home and business owners are able to utilise these and many other similar services. Just click the "Quote" banner to get quotations for floor screeding.

Book a Screeder in Hayes UK

Granolithic Screeding

Granolithic screeding is a process of creating an even and smooth surface for floor coverings like tiles or carpets. It involves mixing sand, cement, and aggregate such as marble or granite chips to form a mixture, which is then applied to a concrete base. The mixture is levelled with a straight edge to give it a smooth surface.

Granolithic screeding is commonly used in industrial and commercial buildings and also in high-traffic areas in residential buildings. It is also commonly used in areas where abrasion and chemical resistance are essential. The resulting surface is smooth and hard, which makes it easy to maintain and clean, and provides a perfect base for other flooring products.

The granolithic screeding process involves several steps, including preparation of the concrete base, mixing of the screed mixture, laying of the mixture, and curing of the screed. Correct mixing, application and curing techniques are crucial to guarantee the strength and durability of the finished surface. Furthermore, the screed should be allowed to cure fully before any further flooring materials are laid over it.... READ MORE.

Screed Floor Removal

Pre-existing screed can be extracted and eliminated from a surface through the practice of screed floor removal. It is often necessary when renovating or upgrading a floor. To effectively break up and remove the layer of screed, specialised techniques and equipment are indispensable in the removal process. The preparation of the surface for new floor covering or other alterations is thus made possible. Contractors who are skilled in screed floor removal ensure the efficient and safe removal of the old screed, enabling a fresh start for the floor, whether it's for upgrades, repairs or design alterations. (22264 - Screed Floor Removal Hayes)

Hayes Screeding Related Tasks

Screeding Related Tasks Hayes

There is a wide range of work that can be completed by your local Hayes floor screeder including screed aftercare, bonded concrete screeding in Hayes, wet room floors, bonded screed, concrete screed, garage floor screeding, decorative floor screeding in Hayes, conservatory screeding, monolithic floor screeding, floor screed testing, screeding price quotes, structural screeds, lightweight floor screeding, floor insulation in Hayes, screed kitchen floors in Hayes, substrate floor preparation, sand screeding in Hayes, coloured floor screeding, shop screeding, floor screeding, polished screed flooring, concrete floor toppings, polished screeding, underfloor heating screeds, final floor finishes, polished concrete flooring, screed reinforcement, thin bed floor screeding in Hayes, floating screed, screed bathroom floors, and lots more floor screeding tasks. Listed are just some of the tasks that are conducted by those installing floor screeding. Hayes providers will be delighted to keep you abreast of their whole range of services.

The Tools Required for Screeding Floors

  • Shovel
  • Wheelbarrow
  • Float
  • Trowel
  • Floor Profiler
  • Spirit Level
  • Gloves
  • Knee Protectors
  • Humidity Tester
  • Straight Edge
  • Measure

Floor Screeding Near Hayes

Also find: Yiewsley floor screeding, Colham Green floor screeding, Sipson floor screeding, South Ruislip floor screeding, Bickley floor screeding, Harlington floor screeding, Upper Elmers End floor screeding, Cowley floor screeding, Hayes End floor screeding, Goulds Green floor screeding, Cranford floor screeding and more. These and other towns and villages are served by screeding specialists and related tradespeople. Possessing the skills and expertise required for delivering top-quality flooring solutions, these experienced professionals are well-equipped. Whether it’s for residential or commercial properties, they are proficient in screeding and make sure that the process is executed to the highest possible standards. By simply clicking here, screeding quotes are readily available to local householders.

Floor Screeding Services Hayes

Find Floor Screeding in Hayes Here
Screeding Services in Hayes Greater London (020)
  • Hayes Structural Screeds
  • Hayes Underfloor Heating Installations
  • Hayes Floor Insulation
  • Hayes Cheap Floor Screeding
  • Hayes Floor Levelling
  • Hayes Polished Screed Floors
  • Hayes Floor Screeding
  • Hayes Fast-Dry Floor Screeding
  • Hayes Liquid Screeds
  • Hayes Fibre Reinforced Screeding
  • Hayes Commercial Screeding
  • Hayes Wet Room Screeding
  • Hayes Residential Floor Screeding
  • Hayes Screeding Services

To get local Hayes information click here

Hayes Screeding Jobs: Get screeding jobs near Hayes by going here: Hayes Screeding Jobs

Floor screeding in UB3 area, and dialling code 020.

TOP - Floor Screeding Hayes

Floor Levelling Services Hayes - Residential Screeding Hayes - Screeders Hayes - Industrial Screeding Hayes - Screeding Estimates Hayes - Floor Screed Companies Hayes - Screeder Hayes - Screeding Hayes - Fast-Dry Screeding Hayes


(This screeding Hayes content was written on 19-06-2024)