Floor Screeding Yatton

Yatton Screeding & Floor Levelling Services

Floor Screeding Yatton Somerset (BS49): A professional floor screeding company can help to install under floor heating, level a damaged or uneven floor or assist with renovations on your Yatton home, when needed. A screed is used to generate a smooth floor on top of a concrete sub-base and give a level foundation for you final flooring material. The screeding is an important process to ensure a high quality and durable finish to the entire floor structure.

Free Yatton Floor Screeding Quotes


An established floor screeding company in Yatton will have know-how and experience to help you achieve a perfect floor in whatever size or shape of room you are working on. They will be able to advise you on the correct kind of screed your project requires, and how best to apply and install it.

Floor Screeding Yatton Somerset (BS49)

It may be necessary, based on the intended use of the area in question, for a structural engineering survey to abide by building regulations on flex strength, load bearing and point loadings of the screed floor.

Qualified and skilled tradespeople are essential to a successful outcome and will extend the lifespan of your floor by using the correct sort of screed for your room's allocated purpose. Choosing the right screeding materials and the method of installation is crucial if you want to finish up with a durable and quality finish for your floor surface.

Ensure that you get at least two or three quotations for your Yatton based screeding project and also ask to what standard you're getting a quote. The SR (Surface Regularity) finish is the figure to keep your eye on when studying an estimate from your Yatton screeding contractor. Each of the 3 SR levels offer different qualities of finish, with SR1 offering the highest quality, with the smallest amount of deviation over the surface area. An SR2 or SR3 level could mean there are flat spots or ridges that may cause issues when putting down your final flooring surface (wood, tile, carpet etc).

Floor Screeders Yatton (01934)

British Standards BS8204 sets down the guidelines and regulations that all Yatton screeding installers is obliged to follow, and if working with specialist screeding solutions, (Gypsol, Flowcrete, Cemfloor etc), they should be approved by the manufacturers as being skilled and trained in their use. A company holding accreditation demonstrates that they have been assessed and trained in the use of these products and can offer a high standard of service in all areas of their installation.

For larger screeding projects in warehouses, factories, hospitals, boutiques, schools and shopping centres, specialist Yatton commercial screeders will be required.


Standard Screeds - This is good for basic domestic usage and comprises a blend of sand and cement. This mix uses a 5 to 1 ratio of sand to cement. This 5 to 1 ratio standard screed will set hard at a rate of 1mm per day after application.

Fibre Reinforced Screed - The favourite choice of professional contractors for use with underfloor heating systems. The fibres in the screed improve overall strength and durability while also safeguarding against thermal cracking and shrinkage. The screed will dry out at a rate of 1mm/day.

Fast Drying and Advanced Drying Screeds - If there is a need to use the area as quickly as possible a fast drying screed can be used. They're typically a fibre reinforced type of screed that dries out at a rate of between 3-7mm per day and are used in time critical flooring projects.

Liquid or Self-Levelling Screeds - When a high standard of finish is needed this formula of cement and latex is employed to create SR1 quality screeding. Typically used to finalise a poor substrate level or damaged floor to enable the laying of a new flooring surface, such as vinyl planks over it. They can be as little as 1mm thick, and thanks to the latex polymers, will still provide a high strength finish.

Polymer Screeds - Provides an extremely high level of strength with a lower thickness. Owing to their different chemical compositions, these polymer screeds have varying curing times which can be verified by reading manufacturer's guidelines.

Industrial and Heavy Duty Screed - Made for maximum strength and durability on floors where traffic is high or heavy loading on the floor base is necessary.

Screeding Quotes Yatton Somerset


To enable the screeding to be of a good quality finish that is hard wearing and durable, time must be devoted to fully preparing the area before any screed is poured. It's important that all contaminants such as grease, loose debris, oil or paint is eliminated from the base before laying any screed, because these can affect the bonding capability that a good quality floor screed requires.

Screeding Near Yatton (BS49)

Any cleansing chemicals which are used in this process shouldn't leave any residues, and the floor base must be permitted to dry by itself naturally. If screeding over a cement or stone floor all cracks should be repaired to stop them from "travelling" up through a screed layer and causing deviations on the final surface. A competent Yatton screeding contractor will take note of these aspects during the site survey and make sure all preparations are completed before applying the next steps in the floor screeding process.

A DPM (damp proof membrane) will be applied once the preparation work has been finished to prevent ground dampness getting into the flooring materials and screed. The damp proof membrane is made of thick polythene and various layers might be used to act as a moisture barrier and air insulating layer for the screed.

If the area where you live is at risk from radon then an additional barrier is needed to prevent this harmful gas from entering via the ground. An air-tight membrane may be enough in locations with low radon emissions, but in more severe cases there might have to be a more complex ventilation and extraction system to take away any ground penetrating radon gases.

The final stage of surface preparation is the painting or spraying of a primer or sealant. A primer assists in the screed bonding process to the base and different varieties exist according to which type of screed is being applied. These substances require certified contractors to apply them in the correct proportions by using airless sprays and other bespoke equipment.

Before the screeding can be laid, any underfloor heating (if required) will now be installed. The heating pipes and cables are securely mounted on insulation panels to stop any movement and ensure that they're laid in the correct position. Under floor heating is one of the most effective ways to heat a room and an expertly installed system will deliver even warmth across the floor area.

Floor Screed Yatton (01934)

Needless to say, if you aren't putting in under floor heating, you simply bypass this step and apply the screed. The specific requirements of the room will determine the sort of screeding used. Remember that even quick drying and advanced screeds have a minimum of twenty four hours before you can walk on any laid surface and at least three days before any floor coverings can be fitted. Manufacturer's drying guidelines for standard and heavy duty screeds must be observed so as to achieve a quality finish and provide a stable and long lasting floor surface.

You can assess the SR level of the finished screed once it's solidified enough for walking on. Using a 2 mtr straight-edge the surface is checked for any dips, ridges and deviations in the surface of the screed.

  • SR1 - Disparities of 3 millimetres or less being measured across the entire floor area shows your screeding to be of the best quality and is categorised as SR1.
  • SR2 - The standard flooring in industrial and commercial builds is normally SR2 and has a maximum possible deviation of five millimetres across the entire screeded floor.
  • SR3 - For other floors where the finish is relatively unimportant SR3 is the standard and has a maximum deviation measurement of 10 millimetres or less.

If your screed has been laid with specific load bearing requirements in mind then a structural engineer is going to be required to carry out the tests. The testing will ensure your new screed surface is viable for the load bearing requirements laid out in the site survey. A drop hammer test is conducted on several areas of the screed layer and the results documented. Only certified structural engineers applying the British Standards BS8204 regulations are allowed to carry out such tests and sign off on the structural integrity of a screed floor. (Tags: Floor Screeding Yatton, Screeding Yatton, Floor Screeding Services Yatton, Floor Screed Yatton).

Floor screeding services are available in Yatton and also in: Claverham, Hewish, Clevedon, Puxton, Nailsea, Redhill, Kingston Seymour, St Georges, Kingston Bridge, Wrington, Horsecastle, North End, Tickenham, Backwell, Cleve, Congresbury, Kenn, and in these postcodes BS49 4RL, BS49 4HQ, BS49 4BX, BS49 4DL, BS49 4EL, BS49 4AL, BS49 4RF, BS49 4DQ, BS49 4FR, BS49 4EW. Locally based Yatton floor screeders will most likely have the phone code 01934 and the postcode BS49. Verifying this should make sure that you are accessing local screeding. Yatton property owners can utilise these and numerous other floor related services.

Book a Screeder in Yatton UK

Latex Floor Screed Yatton

When a certain amount of flexibility is required in a floor's surface you might find that the use of a latex screed will be an advantage. Latex floor screed comes in two parts, a bottle and a bag, with the bag containing a cemetitious powder, and the bottle containing a liquid latex mixture. The liquid latex solution replaces the water that would typically be used in a screed mix, and is quicker drying and far more flexible than standard screeds.

Used in the levelling-out of sub-floors, this latex product provides a suitable surface for the laying of your chosen floor finishes. Suitable for sub-floors of wood, concrete, asphalt, quarry tiles and sand/cement, this gives a perfect surface for the application of flooring adhesives which is resilient and smooth. This type of latex screeding will produce a crack-free, flexible finish, even if there is a bit of movement in your sub-floor.

When using a "floating" screed, for instance when screeding is being laid on the top of underfloor heating, thicknesses of 50-65mm may be needed, and latex screeds are not suitable in this instance. (Tags: Latex Floor Screed Yatton, Latex Screeding Yatton, Latex Screed Yatton, Latex Screeds Yatton).

Related Tasks

Screeding Related Tasks Yatton

There is a variety of work that can be completed by your local Yatton floor screeder including floor restoration, self-levelling screeding Yatton, anhydrite screeds in Yatton, garage floor screeding Yatton, floor preparation services Yatton, floor screed testing, underfloor heating installation, concrete pumping Yatton, floor noise dampening in Yatton, bonded concrete screeding, substrate floor preparation in Yatton, concrete screeding in Yatton, floor screeding estimates, shop screeding Yatton, sand floor screeding, conservatory screeding, bonded screed Yatton, damp proof membranes, fibre reinforced screeding in Yatton, floor insulation, industrial screeding, decorative floor screeding Yatton, coloured floor screeding Yatton, unbonded screed in Yatton, external screeding, residential screeding Yatton, floor screeding advice, sand and cement screeding, and more floor screeding tasks. These are just a few of the activities that are handled by those specialising in screeding. Yatton providers will let you know their full range of services.


Floor Screeding Near Yatton

Also find: Tickenham floor screeders, Nailsea floor screeders, Clevedon floor screeders, Horsecastle floor screeders, Hewish floor screeders, Kingston Bridge floor screeders, Redhill floor screeders, Backwell floor screeders, St Georges floor screeders, Congresbury floor screeders, Kenn floor screeders, Claverham floor screeders, Kingston Seymour floor screeders, Puxton floor screeders, Wrington floor screeders, North End floor screeders, Cleve screeding services and more. Most of these areas are serviced by companies who do screeding. Yatton homeowners can get quotes by clicking here.

Floor Screeding Services Yatton

Find Floor Screeding in Yatton Here
Screeding Services in Yatton Somerset (01934)
  • Yatton Underfloor Heating Installation
  • Yatton Screed Calculator Service
  • Yatton Floor Levelling
  • Yatton Screeding Advice
  • Yatton Residential Floor Screeding
  • Yatton Liquid Screeds
  • Yatton Cheap Screeding
  • Yatton Screeding Services
  • Yatton Commercial Floor Screeding
  • Yatton Polished Screed Floors
  • Yatton Floor Screeding
  • Yatton Fast-Dry Floor Screeding
  • Yatton Floor Damp Proofing
  • Yatton Fibre Reinforced Screeding

Screeding Around Yatton: Some Yatton roads where screeding work has recently been done - Meetinghouse Lane, Frost Hill, Heathgate, Horsecastle Close, Elm Close, The Avenue, Station Road, Moor Road, Henley Lodge, Westaway Close, Laurel Terrace, Wemberham Crescent, Barberry Farm Road, North End Road, Hunt's Lane, The Park, Broadcroft Close, Meadowland, The Ridge, Broadcroft Avenue, Wemberham Lane, Hollowmead, Elm Walk, Westaway Park, Park Avenue, Chescombe Road, as well as the following local Yatton postcodes: BS49 4RL, BS49 4HQ, BS49 4BX, BS49 4DL, BS49 4EL, BS49 4AL, BS49 4RF, BS49 4DQ, BS49 4FR, BS49 4EW. These areas recently saw activity by experts in screeding. Yatton home and property owners were given dependable and top quality floor screeding services in every case.

Yatton Screeding Jobs: Get floor screeding jobs near Yatton here: Yatton Screeding Jobs

If you're interested in local information about Yatton, Somerset go here

Floor screeding in BS49 area, and dialling code 01934.

TOP - Floor Screeding Yatton


(This screeding Yatton content was created by S. N. Locke 30-06-2022)