Floor Screeding Wantage

Floor Screeding Wantage Oxfordshire (OX12): If you are renovating a property or cellar, have a damaged or uneven floor or are looking to install under floor heating, then contacting a specialist floor screeding service in Wantage is the best option. To provide a good foundation for your choice of top flooring material, screeding is used to produce a smooth floor surface over a concrete sub-base. To guarantee a high quality and durable finish to the whole floor structure, screed is an essential component.

FLOOR SCREEDING COMPANIES WANTAGE

Whatever size room you are renovating, a decent floor screeding specialist in Wantage will supply the experience and proper working practices to establish a perfect base for your flooring. They will be ready to advise you on the correct type of screed that your project requires, and how best to apply and install it.

It might be a requirement, depending on the intended use of the area in question, for a survey by a structural engineer to conform to building regulations on flex strength, point loadings and load requirements of the screed floor.

Bringing in a skilled and qualified contractor will guarantee you use the correct sort of screed for the room's intended purpose to extend the lifespan of your floor. There are numerous types of floor screeding and choosing the right mix and laying technique is vital to create a quality floor which is fit for purpose and hard-wearing.

Before picking out a screeding company from those operating in the Wantage area, ask to what standard of finish they're basing their quotation, and also make certain you get multiple quotations. The Surface Regularity (SR) finish is the number to watch out for when reviewing an estimate from Wantage floor screeding companies. SR2 and SR3 will be less costly options, however the finished floor surface may have deviations and errors, whilst SR1 guarantees a perfect quality of finish. This means that you may have to fix any areas that might cause issues when putting down your final flooring material.

British Standards BS8204 sets down the guidelines and regulations that all Wantage screeding contractors are required to follow, and if applying specialist screeding solutions, (Flowcrete, Cemfloor, Gypsol etc), they must be accredited by the manufacturers as being skilled and trained in their use. This accreditation program highlights a contractor's training and performance in the usage of a manufacturer's products.

TYPES OF SCREED

Standard Screeds - This is perfect for normal residential use and is a combination of sand and cement. This mixture comprises a five to one ratio of sand to cement. After being laid a standard screed dries out at a rate of 1mm/day.

Industrial and Heavy Duty Screed - Made for maximum strength and durability on floors where traffic is high or heavy loading on the floor base is necessary.

Fast Drying and Advanced Drying Screeds - If there is a need to use the area ASAP a fast drying screed can be utilised. Drying at a rate of three to seven millimetres, subject to the mix, they're usually a fibre reinforced screed and are ideal for flooring projects which have tight deadlines.

Fibre Reinforced Screed - The preferred option for professionals where under floor heating is being installed in residential properties in Wantage. The improved flex and strength provided by the special fibres within this screed mix help protect the resulting floor from shrinkage and cracking due to heat. It's got a setting rate of 1mm per day.

Self-Levelling or Liquid Screeds - A latex and cement solution which can produce the highest standard SR1 finish. Primarily used to finish off a poor substrate level or damaged floor to enable the laying of a new flooring surface, like tiles on top of it. The liquid screed can be poured to a thickness of just one millimetre, but still provides a high strength base for a wide variety of flooring finishes.

Polymer Screeds - An extremely high strength flooring solution where a reduced screed thickness is needed. Polymer screeds are made by a number of manufacturers and due to their varying chemical compositions have specific curing times for each product.

SCREEDING PREPARATION AND INSTALLATION

To enable the screeding to be of a good quality finish that is hard wearing and durable, time should be devoted to preparing the area prior to any screed being laid. Any oil, paint, debris and grease on the original floor surface can adversely affect the adhesion of the screed, and should be eradicated.

If cleaning products were used it is vital to remove any residues of soap, detergent etc, and leave the surface to dry naturally. It is essential to fix any cracks in the floor surface to avoid them being mirrored and "travelling" up into the newly screeded floor. An on-site survey will enable your Wantage screeding contractor to highlight this preparation work and complete it before commencing to lay the screeding.

A DPM (damp proof membrane) will be installed once the preparation work has been done to stop ground dampness affecting the flooring materials and screed. Different gauges of specialised polythene could be used as a DPM and also act as a barrier for the screed and any insulation panels.

If the area is at risk from radon gas then an additional barrier is necessary to prevent the gas from entering via the ground. A simple airtight membrane could be enough in areas with relatively low radon emissions, however in more severe cases there might have to be a more sophisticated extraction system to remove any ground penetrating radon gas.

As soon as the base has been prepared and all DPMs installed, a sealant or primer is then applied. These primers and sealers will make certain that the screed bonds successfully to the base and help produce a good quality finished floor. These materials require skilled contractors to apply them in the correct ratios by using airless sprays and other tailor-made equipment.

This is the time that under floor heating can be installed and laid out in the correct way. The heating pipes and cabling are securely attached to insulation panels to prevent any movement and ensure they are positioned correctly. When professionally installed an under floor heating system is an efficient way to warm a room and decent quality screed will retain its heat, creating an even level of warmth right across the floor surface.

Obviously, if you are not installing underfloor heating, you simply skip this stage and apply the screed. Your screeding contractor will have given you advice on which screed type is appropriate for your needs, according to your intended use of the room. For quick drying and advanced screeds there will be at least twenty four hours delay before it can be walked over, and a further 72 hours minimum before you can install any flooring materials. If you're aiming to end up with a properly finished and long-lasting floor surface you should stick to the manufacturer's guidelines with regard to standard and heavy duty screeds where the time period will be longer.

Once the screeding has set it can be quality checked to establish its SR level. The test involves using a 2 metre long straight-edge laid on the surface and any deviations from true are measured.

• SR1 - SR1 is the best specification and permits just 3mm of disparity from the straight-edge.

• SR2 - If the floor has a deviation from the straight-edge of five millimetres or less it is classified as SR2 level and is the standard for industrial and commercial floors.

• SR3 - For a utility area or room where the quality of finish is relatively unimportant the SR3 is the standard and has a maximum deviation measurement of 10mm or less.

If your screed has been laid with particular loading in mind then a structural engineer will be required to carry out the tests. Using specialist equipment the structural engineer will assess the screeding strength and suitability of use in a load bearing setting. The screed could be given what is known as a drop hammer test to determine flexibility and strength in various areas. Only qualified structural engineers respecting the British Standards BS8204 regulations are allowed to conduct these testing and sign off on the structural integrity of a screed floor. (Tags: Screeding Wantage, Floor Screeding Services Wantage, Floor Screed Wantage, Floor Screeding Wantage).

Screeding services are available in Wantage and also in nearby places like: Stanford in the Vale, Grove, Ardington, East Lockinge, Lambourn, East Hanney, Harwell, Marcham, Compton, East Challow, Denchworth, Letcombe Regis, East Hendred, Steventon, and in these postcodes , OX12 8NR, OX12 2ER, OX12 7HD, OX12 8FL, OX12 8EA, OX12 8HT, OX12 7AB, OX12 8EJ, and OX12 8EY. Locally based Wantage floor screeders will most likely have the telephone code 01235 and the postcode OX12. Checking this out can make certain that you access local screeding. Wantage property owners are able to benefit from these and various other similar services. Home and property owners who are in need of floor screeding quotations can simply click on the "Quote" banner provided.

Latex Floor Screed Wantage

When the surface of a floor needs a certain degree of flexibility, it might be wise to use a latex screeding. Generally coming in 2 parts, latex screeds comprise a cement-based smoothing compound, and a liquid latex additive. The latex liquid part replaces the water which would normally be used in a screed mix, and is far more flexible and quicker drying than standard screeds.

Before the laying of your chosen decorative covering, this latex product is used for levelling-out subfloors. Suitable for substrate of sand/cement, wood, asphalt, stone tiles and concrete, this gives the ideal surface for the application of flooring adhesives that is smooth and durable. This latex floor screed will provide a flexible, crack-free finish, even if there is a bit of movement in your sub-floor.

When using a "floating" screed, i.e. when screeding is being laid over the top of underfloor heating, depths of 50 to 75 millimetres may be required, and latex flooring screeds are not suitable in this case.

The Tools You Will Need For Floor Screeding

• Spiked Roller
• Gloves
• Trowel
• Spade
• Floor Profile
• Straight Edge
• Spirit Level
• Measure
• Wheelbarrow
• Float
• Knee Protectors

Related Tasks

There is a range of work that can be undertaken by your local Wantage floor screeding specialist including granolithic floor screeding, floor preparation services, bonded screed Wantage, decorative floor screeding Wantage, floor resurfacing Wantage, residential screeding, structural screeds, bonded concrete floor screeding, lightweight floor screeding, floor screed testing in Wantage, anhydrite screeds, commercial floor screeding in Wantage, screeding repairs, screed flooring, conservatory screeding Wantage, polished screeding, thin bed floor screeding Wantage, concrete screeds Wantage, liquid screeds, floor noise dampening Wantage, underfloor heating installation, damp proof membranes, underfloor heating screeding, floor insulation Wantage, floating screed, coloured floor screeding Wantage, screeding advice, screed reinforcement in Wantage, fast drying or accelerated floor screeds, concrete pumping in Wantage, and lots more floor screeding tasks. These are just a few of the activities that are carried out by people specialising in screeding. Wantage companies will be happy to tell you about their whole range of floor screeding services.

Floor Screeding Near Wantage

Also find: East Challow floor screeding, East Hanney floor screeding, Marcham floor screeding, Harwell floor screeding, East Lockinge floor screeding, Steventon floor screeding, Letcombe Regis floor screeding, Grove floor screeding, East Hendred floor screeding, Lambourn floor screeding, Compton floor screeding, Ardington floor screeding, Stanford in the Vale floor screeding, Denchworth floor screeding and more. Almost all of these localities are catered for by contractors who do screeding. The expertise and skills required to provide the best quality flooring services are possessed by these experienced specialists. For both residential and commercial properties, their expertise in screeding guarantees that the work is carried out to the best possible standards. To get screeding quotes, local residents can go here. Why not start your floor screeding project right away?

Floor Screeding Services Wantage

Find Floor Screeding in Wantage Here

• Wantage Floor Insulation
• Wantage Fibre Reinforced Floor Screeding
• Wantage Floor Screeding
• Wantage Screeding Advice
• Wantage Liquid Screeds
• Wantage Fast-Dry Screeding
• Wantage Underfloor Heating Installations
• Wantage Screeding Services
• Wantage Screed Calculator Service
• Wantage Polished Screed Floors
• Wantage Floor Levelling
• Wantage Industrial Screeding
• Wantage Cheap Floor Screeding
• Wantage Final Floor Finishes

Other Trades Wantage Oxfordshire: When your Wantage property needs improvements or remodeling, various different tradesmen might be necessary to successfully complete the project, and even though your present search is for floor screeding in Wantage, Oxfordshire, you might also need the expertise of a plasterer in Wantage, solid wood flooring in Wantage, a builder in Wantage, garden clearance in Wantage, a carpenter/joiner in Wantage, a floor tiler in Wantage, a carpet fitter in Wantage, rubber flooring in Wantage, SKIP HIRE Wantage, an underfloor heating specialist in Wantage, a plumber in Wantage, an electrician in Wantage, an odd job man in Wantage, cleaners in Wantage, a stonemason in Wantage, a roofer in Wantage, and quite possibly others.

If you need local Wantage info check here

Floor screeding in OX12 area, phone code 01235.

Screeding Quotations Wantage - Screeding Services Wantage - Floor Screed Companies Wantage - Screeding Wantage - Self-Levelling Screed Specialists Wantage - Floor Screeding Near Me - Quick-Dry Screeding Wantage - Floor Levelling Wantage - Residential Screeding Wantage