Floor Screeding Lightwater

Lightwater Screeding & Floor Levelling Services

Floor Screeding Lightwater Surrey (GU18): You should contact a floor screeding professional in Lightwater if you are planning to install underfloor heating, have a damaged or uneven floor or are renovating a property or cellar. To provide you with a level foundation for your choice of top flooring material, screeding is used to create a smooth floor over a bare concrete sub-base. A floor screed is a key aspect of many restoration and building projects in Lightwater.

Free Lightwater Floor Screeding Quotes


It does not matter how big or small the area is that you require to be levelled, a competent floor screeding specialist in Lightwater will have the essential knowledge, expertise and equipment to give you an excellent standard of service. When your project has been properly evaluated, they'll be in a position to inform you of the correct kind of screed required for your project, and how best to apply it.

Floor Screeding Lightwater Surrey (GU18)

Your screeding specialist will also tell you if a structural engineer is required for your undertaking, to check on point loadings, load requirements and flex strength that your flooring might require to conform with current British Standards and building regulations.

The training and skills that a certified screeding specialist brings to your project will guarantee a high quality result and help to lengthen the life of your flooring. There are many types of floor screed and choosing the appropriate mix and installation technique is critical to create a quality floor that is both fit for purpose and hard-wearing.

Make certain you get at least 2 or 3 quotations for your Lightwater screeding project and also ask what standard of finish each estimate is for. The Surface Regularity (SR) finish is the figure to keep your eye on when receiving a quote from your Lightwater screeding contractor. SR2 and SR3 will be more affordable options, although the finished floor surface could have deviations and errors, whilst SR1 guarantees a pretty much perfect finish. This means you might have to correct any areas that could cause problems when putting down your final flooring material.

Floor Screeders Lightwater (01276)

Every Lightwater screeding company has to comply with British Standards (BS8204) and ought to have some kind of accreditation from the manufacturers of screeding equipment and materials, e.g. Cemfloor, Gypsol, Flowcrete. A contractor holding such accreditations demonstrates they've been assessed and trained in the use of these products and can deliver a high standard of service in all aspects of their installation.

Lightwater commercial screeders may be involved in the screeding of floors in schools, warehouses, hospitals, shops, hotels and factories.


Standard Screeds - A combination of sand and cement which is okay for basic domestic use. The standard screed is a mix of five parts sand to one of cement. After laying a standard screed mixture dries out at a rate of just 1mm/day.

Fibre Reinforced Screed - The favoured option where underfloor heating is being installed in residential homes in Lightwater. The greater strength and flex offered by the special fibres in this screed mix help protect the floor from thermal cracking and shrinkage. The screed will dry out at a rate of roughly 1mm/day.

Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading of the floor is required, heavy duty screeds provide maximum durability and strength.

Polymer Screeds - An extremely high strength solution where a reduced thickness is essential. Maker's guidelines for curing times differ across the various product ranges.

Fast Drying and Advanced Drying Screeds - As the name would suggest, this screed dries quickly and allows you to use the screeded area much sooner. Drying at a rate of three to seven millimetres, subject to the specialised mix, they are typically a fibre reinforced screed and are suitable for projects that have tight deadlines.

Screeding Quotes Lightwater Surrey

Liquid or Self-Levelling Screeds - When a high standard of finish is needed this mixture of cement and latex is used to create SR1 quality screed flooring. This is mainly needed to produce a smooth, clean floor over the top of a poor quality or damaged substrate and enables all types of flooring materials to be used. Even with a thickness of only one millimetre, the latex polymers within the mixture provide a high strength screed for a variety of uses.


Good preparation is essential for a top quality screed surface that will be hard wearing and durable. Any paint, debris, grease and oil on the original floor surface can affect the bonding of the screed, and should be removed.

Screeding Near Lightwater (GU18)

If any products were used in this process it's vital to make certain that no residues of detergents, soaps or other cleaning products are left on the surface and it is permitted to dry out naturally. At this point cracks need to be mended since these can easily travel up through the laid screed and be visible in the completed floor surface. A reliable Lightwater screeding company will pick up on such problems during a on-site survey and ensure all preparations are complete before pressing on with the next stages of the floor screeding process.

A DPM (damp proof membrane) will be installed once the preparation work has been finished to prevent ground dampness affecting the screeding and floor materials. The damp proof membrane is made out of thick polythene and various layers could be used to serve as a moisture barrier and air insulating layer for the screed.

An additional airtight barrier could be necessary if your building is in an area which is known to be prone to radon. A simple airtight membrane could be enough in places with relatively low emissions of radon, however in more severe cases there may have to be a more sophisticated ventilation and extraction system to block any harmful radon gas.

As soon as the base has been properly prepared and any membranes installed, a sealant or primer is then applied. These primers and sealers will ensure the screed bonds successfully to the floor base and help to achieve a good quality finished floor. On account of their special nature, only certified screeding specialists in Lightwater should be entrusted with using them safely and correctly and through the use of equipment that's made for the task.

Before any screed is laid, any underfloor heating (if required) will now set out and installed. The under floor heating system is laid out in the correct pattern and firmly secured to insulation panels to prevent any movement during screed pouring. Under floor heating is one of the most effective ways to heat a room and a professionally installed system should deliver even warmth all over the floor.

Floor Screed Lightwater (01276)

The screeding can now be prepared in situ and poured onto the base. Your screeding company will have given you advice and guidance on which kind of screed is suitable for your needs, according to your proposed use of the room area. For advanced and quick drying screeds there'll be at least twenty four hours delay before it can be walked on, and a further 72 hours minimum before you can install any flooring materials. If you're laying standard or heavy duty screeds the drying time is longer and the manufacturer's guidelines must be followed so as to get the best finish for your floor.

The SR standard of your screed can be confirmed once it's solidified sufficiently to be walked upon. The test involves using a two metre straight edge laid on the floor surface and any deviations from true are calculated.

  • SR1 - Disparities of 3 millimetres or less being measured over the whole area shows your screed floor to be of the finest quality and specified as SR1.
  • SR2 - SR2 is the classification for normal standard floors in commercial and industrial projects and can deviate from the straight-edge by as much as 5mm.
  • SR3 - If the deviation is ten millimetres or less the screeding quality is classed as SR3 and is highly suitable for utility and garage areas.

It may also be necessary for a qualified structural engineer to conduct a soundness test. This assessment will establish the strength of the screed surface and the suitability for its proposed use. This should include a drop hammer test which assesses various aspects of the flexibility and strength of the screed. Only experienced structural engineers applying the British Standards BS8204 regulations are allowed to perform these tests and sign off on the structural safety of screed flooring. (Tags: Screeding Lightwater, Floor Screeding Services Lightwater, Floor Screed Lightwater, Floor Screeding Lightwater).

Screeding is available in Lightwater and also in nearby places like: Stonehill, Castle Green, Owlsmoor, Deepcut, Burrowhill, Bisley, West End, Longcross, Donkey Town, Brookwood, Mimbridge, and in these postcodes GU18 5TY, GU18 5XY, GU18 5PB, GU18 5TL, GU18 5XB, GU18 5YF, GU18 5PA, GU18 5TP, GU18 5QT, and GU18 5UX. Locally based Lightwater floor screeders will likely have the phone code 01276 and the postcode GU18. Checking this can confirm that you are accessing locally based screeding. Lightwater property owners will be able to utilise these and numerous other similar services. Homeowners who require floor screeding estimates can simply click on the "Quote" banner provided.

Book a Screeder in Lightwater UK

Latex Screeding Lightwater

It is advantageous to use a latex floor screed when a certain amount of flexibility is needed in a floor's surface. Latex floor screed comes in 2 parts, a bag and a bottle, with the bag containing a cement powder, and the bottle containing a liquid latex component. The water that is normally used in a screed mix is replaced by the liquid latex, making it more flexible than standard screeds, and quicker drying.

Used for levelling subfloors, this latex product creates a surface for the laying of the final floor finish. This is suitable for substrate made from wood, asphalt, quarry tiles, concrete or sand/cement, is ideal for the application of flooring adhesives and gives a durable and smooth surface. This type of screeding will give you a flexible, crack-free finish, even if there happens to be movement in your sub-floor.

Latex floor screeds aren't suitable where "floating" screeds are needed, for example when a screed is being laid over a layer of either thermal or acoustic insulation, such as could be the case when you are screeding over underfloor heating, and depths of 50-75mm may be necessary. (Tags: Latex Floor Screed Lightwater, Latex Screeds Lightwater, Latex Screeding Lightwater, Latex Screed Lightwater).

Screed Floor Removal

Screed floor removal is a procedure that eliminates existing screed from a surface. The necessity often arises when renovating or upgrading a floor. To effectively break down and remove the layer of screed, specialist techniques and equipment are indispensable in the removal process. The surface can be prepared for new floor covering or other alterations, thanks to this. Ensuring safety and efficiency, contractors adept at screed removal undertake the secure elimination of the old screed, providing a fresh start for the floor, whether for design changes, repairs or upgrades. (22264 - Floor Screed Removal Lightwater)

Related Tasks

Screeding Related Tasks Lightwater

There is a wide range of work that can be accomplished by your local Lightwater floor screeder including concrete floor toppings, professional floor levelling services in Lightwater, liquid screeds, pumped screeds, bonded screed, floor preparation in Lightwater, floor resurfacing, floor noise dampening, floating screed, granolithic floor screed, floor levelling, resin floor screeds Lightwater, shop floor screeding in Lightwater, flow screeding, floor screeding, floor renovation, basement floor screeding Lightwater, final floor finishes Lightwater, floor smoothing compounds, monolithic floor screeding Lightwater, floor insulation, external screeding, factory floor screeding in Lightwater, bonded concrete floor screeding, screed reinforcement, concrete screeding, latex screed, fibre reinforced floor screeding, unbonded screed, floor screed testing, screed surveys, structural screeds, conservatory screeding Lightwater, and more floor screeding tasks. Listed are just some of the activities that are handled by those installing floor screeding. Lightwater contractors will inform you of their full range of floor screeding services.

Skip Hire Lightwater

Skip Hire Lightwater

Sometimes it is quite tricky to fully grasp the volume of waste that's going to be generated when doing property makeovers or home improvements in Lightwater. For your floor screeding, different amounts of waste will be created, subject to your particular circumstances, and the scope of your project. If the screeding companies you use don't deal with waste removal, and it has not been listed on your price quote, this is something that you are going to have to deal with.

Where there is a fair amount of waste, most householders in Lightwater opt to hire a skip. Skips come in various different according to your requirements, and choosing what type of skip to hire is vital. For smaller projects there are skip bags and mini-skips, for bigger home refurbishments and garden clearances there are midi-skips and standard builders skips, and for commercial and industrial use or really massive projects, roll-on roll-off skips are the best alternative.

If you think you might require a skip for your home improvement project CLICK HERE for a quote.

The Tools You'll Need For Floor Screeding

  • Knee Protection
  • Measure
  • Dappling Bar
  • Buckets
  • Float
  • Straight Edge
  • Floor Profiler
  • Gloves
  • A Long Spirit Level
  • Spade
  • Trowel

Floor Screeding Near Lightwater

Also find: Owlsmoor floor screeding, Bisley floor screeding, Stonehill floor screeding, Donkey Town floor screeding, West End floor screeding, Deepcut floor screeding, Castle Green floor screeding, Brookwood floor screeding, Burrowhill floor screeding, Longcross floor screeding, Mimbridge floor screeding and more. There are contractors who do screeding in most of these areas. These seasoned professionals, by virtue of their expertise and skills, are capable of delivering high-quality flooring services. With respect to screeding, be it for commercial or domestic properties, they ensure that the work is performed to the highest possible standards. By clicking here, screeding quotes are readily available to local residents. Today is the ideal time to kick-start your floor screeding project.

Floor Screeding Services Lightwater

Find Floor Screeding in Lightwater Here
Screeding Services in Lightwater Surrey (01276)
  • Lightwater Liquid Screeds
  • Lightwater Coloured Floor Screeding
  • Lightwater Polished Screed Floors
  • Lightwater Kitchen Screeding
  • Lightwater Fast-Dry Floor Screeding
  • Lightwater Residential Screeding
  • Lightwater Underfloor Heating Installation
  • Lightwater Cheap Screeding
  • Lightwater Floor Damp Proofing
  • Lightwater Fibre Reinforced Floor Screeding
  • Lightwater Floor Screeding
  • Lightwater Floor Levelling
  • Lightwater Commercial Floor Screeding
  • Lightwater Screeding Services

For local Lightwater information look here

Floor screeding in GU18 area, 01276.

TOP - Floor Screeding Lightwater

Residential Screeding Lightwater - Fast-Dry Screeding Lightwater - Floor Screeding Near Me - Floor Screed Contractors Lightwater - Floor Levelling Services Lightwater - Screeding Services Lightwater - Screeding Lightwater - Floor Screeding Lightwater - Commercial Screeding Lightwater


(This screeding Lightwater page was compiled on 04-04-2024)

and more