Floor Screeding Rushden

Rushden Screeding & Floor Levelling Services

Floor Screeding Rushden Northamptonshire (NN10): If you are restoring a property or basement, have a damaged or uneven floor or are planning to install under floor heating in your Rushden property, then it is a good time to consider bringing in a floor screeding professional. A screed is used to create a smooth floor surface over a rough concrete sub-base and give a level foundation for your choice of top flooring material. If you would like your floors to last then a floor screed is one of the most important factors in any building or renovation project.

Free Rushden Floor Screeding Quotes


It matters not how large or small the room you need levelling, a certified screeding contractor in Rushden will have the necessary expertise, equipment and knowledge to offer you an outstanding level of service. After analyzing your project they'll give you advice on the perfect choice of screeding and which technique for laying it is most suited to your circumstances.

Floor Screeding Rushden Northamptonshire (NN10)

It may be a requirement, depending on the proposed use of the area, for a structural engineering survey to abide by building regulations on load requirements, point loadings and flex strength of the screed floor.

Working with a skilled and highly trained specialist will guarantee you get the correct kind of screed for the room's intended usage to extend the lifespan of your flooring. There are many different kinds of floor screeding and choosing the appropriate mix and laying technique is essential to create a top quality floor which is hard-wearing and fit for purpose.

There are several screeding companies in the Rushden area so make sure you get multiple estimates for your floor screeding project before picking out a company and know to what standard of finish is it for. The SR (Surface Regularity) finish is the number to look for when getting a quote from Rushden floor screeding contractors. SR2 and SR3 may be less costly options, although the floor screeding finish may have deviations and errors, whilst SR1 guarantees a pretty much perfect finish. An SR2 or SR3 standard might mean there will be ridges or flat spots that could cause issues when laying your final flooring materials.

Floor Screeders Rushden (01933)

British Standards BS8204 lays down the guidelines and regulations that all Rushden screeding companies is obliged to follow, and if applying specialist screeding solutions, (Cemfloor, Flowcrete, Gypsol etc), they ought to be certified by the manufacturers as being trained and skilled in their use. A contractor holding such accreditation indicates they have been assessed and trained in using these screeding products and can provide a high quality service in all aspects of their installation.

Commercial screeders in Rushden will usually tackle floor screeding projects in schools, pubs, warehouses, hospitals, factories and shopping centres.


Standard Screeds - A mixture of cement and sand which is ideal for normal domestic usage. This mixture comprises a five to one ratio of sand to cement. The standard flooring screed dries at a rate of one millimetre thickness per day.

Polymer Screeds - An extremely high strength flooring solution where a reduced thickness is essential. Owing to their different chemical compositions, these polymer screeds have varying drying times which you can verify by checking manufacturer's product guidelines.

Self-Levelling or Liquid Screeds - Used to produce the highest quality of finish, especially where SR1 levels are needed, by a latex and cement mixture. This self-levelling compound provides a clean and level surface over a rough substrate or damaged floor to allow all flooring materials to be laid. This liquid screed can be laid to a thickness of only 1mm, but will still provide a high strength base to take a selection of flooring finishes.

Industrial and Heavy Duty Screed - Developed for maximum strength and durability in areas where traffic is high or specific loading of the floor base is needed.

Advanced Drying and Fast Drying Screeds - If you need to progress urgently with the work due to time limitations, these screeds dry much quicker than standard flooring screeds. They are usually a fibre reinforced screed that dries out at a rate of between 3-7mm/day per day and are employed in time dependent flooring projects.

Fibre Reinforced Screed - The professional's choice for residential use on top of underfloor heating. This is because of the increased durability and protection against thermal cracking and shrinkage offered by the fibres within the screed mix. The screed will dry out at a rate of roughly 1mm/day.

Screeding Quotes Rushden Northamptonshire


Screeding installers will need to prepare all areas before proceeding with any other work so as to guarantee a hard wearing and quality screed flooring. It's important that all contaminants such as grease, paint, oil or loose debris is eradicated from the base before laying any screed, because these can affect the adhesion process that a good quality floor screed needs.

Screeding Near Rushden (NN10)

If cleansing products were used it's crucial to remove any remnants of soap, detergent etc, and allow the floor surface to dry naturally. It is essential to repair any cracks in the floor surface to prevent them being mirrored and "travelling" upwards into your freshly screeded floor. A site survey will enable your Rushden screeding specialist to highlight this preparation work and tackle it before beginning to apply the screed layer.

To shield the flooring materials and screeding layer from dampness rising up from the ground, a DPM (damp proof membrane) will have to be installed. The DPM is made of thick polythene sheeting and various layers may be used to act as a moisture barrier for the screed.

If the area where you live is at risk from radon then an additional barrier is required to prevent this harmful gas from entering via the ground. This could be just a simple airtight membrane, or in severe situations a ventilation and extraction system is installed beneath the screeding to extract any influx of air and gas from the ground.

Once these steps have been taken the screeding company will put on a sealer or primer to the prepared base. Primers and sealers help the bonding process and are special applications according to the kind of screed that's being used. Due to their special nature, only trained screeding contractors in Rushden are capable of using them correctly, safely and through the use of bespoke equipment for the task.

This is the time that underfloor heating can be installed and laid out in the correct manner. Insulation panels can be put in position and the wires and heating pipes will be firmly fastened so that there is no movement while the screed is being applied. Under floor heating is one of the most effective ways to heat a room and a properly installed system will give an even warmth in all areas of the floor.

Floor Screed Rushden (01933)

Naturally, if you aren't installing underfloor heating, you can skip this stage and get on with applying the screed. The specific requirements of the room will determine the type of screeding that's used. After application of the screed there will be a minimum 24 hours (for advanced and quick drying screeds) before you are able to walk over the surface, and a 72 hour minimum setting period before the laying of any flooring materials. If you're using standard or heavy duty screeds the curing time is longer and the manufacturer's guidelines must be followed in order to get the best finish to your floor.

The SR standard of your screeding can be verified once it's solidified enough to be walked on. Using a two metre straight-edge the floor surface is examined for any ridges, deviations and dips in the screed surface.

  • SR1 - Over the entire floor area, if there are no disparities of more than three millimetres from the straight-edge, you've got a top quality SR1 specification surface.
  • SR2 - If the screeded surface has a deviation from the straight-edge of five millimetres or less it is classified as SR2 quality and is the standard for commercial and industrial projects.
  • SR3 - SR3 is basic utility standard where a perfect quality finish is not needed. This specification allows for a maximium deviation of 10 millimetres.

If your screeding has been installed with particular loading in mind then a qualified structural engineer is going to be needed to carry out the assessment. This test will establish the overall strength of the screeding and the viability for its proposed use. An assessment called the "drop hammer test" is performed at several areas on the screed layer and the results noted. The specialist measurement and testing tools mean that this can only be performed by a trained structural engineer heeding the guidelines of the British Standards BS8204. (Tags: Floor Screed Rushden, Screeding Rushden, Floor Screeding Rushden, Floor Screeding Services Rushden).

Floor screeding services are available in Rushden and also in: Wilby, Chelveston, Wymington, Knuston, Higham Ferrers, Irthlingborough, Caldecott, Podington, Bletsoe, Stanwick, Great Doddington, Sharnbrook, Irchester, Yelden, Wollaston, and in these postcodes NN10 0GU, NN10 0JF, NN10 0LT, NN10 0FD, NN10 0HH, NN10 0BG, NN10 0AH, NN10 0JB, NN10 0ED, NN10 0GP. Local Rushden floor screeders will probably have the postcode NN10 and the telephone code 01933. Checking this will guarantee you access local screeding. Rushden householders can utilise these and many other comparable services.

Book a Screeder in Rushden UK

Latex Screed Rushden

It may be an advantage to use a latex self-levelling screeding when a level of flexibility is needed in a floor's surface. Latex floor screeds come in two parts - a bottle and a bag - with a bottle that contains liquid latex, and a bag that contains a cement based smoothing compound. Latex screeds are quicker drying and more flexible than other types of screed, as the water that's normally used is substituted with the liquid latex.

Prior to the laying of your chosen decorative covering, this latex compound is used for levelling sub-floors. Producing a durable, smooth surface that's ideal for the application of adhesives, this screed is is suitable for use on subfloors of wood, asphalt, sand/cement, quarry tiles and concrete. This type of latex screeding will provide a crack-free, flexible finish, even if there happens to be a bit of movement in your subfloor.

When using a "floating" screed, for instance when an unbonded screed is being laid over the top of a membrane of either thermal or acoustic insulation, screed thicknesses of 50mm-75mm may be needed, and latex flooring screeds are not suited to this purpose. (Tags: Latex Screeds Rushden, Latex Screed Rushden, Latex Floor Screed Rushden, Latex Screeding Rushden).

Skip Hire Rushden

Skip Hire Rushden

Although it is great to do home refurbishments or property makeovers on your property in Rushden, a serious drawback can be getting rid of the waste that is generated after the job is finished. Whether or not a lot of waste is created by your floor screeding will be determined by the particulars of your specific project, sometimes there will be lots of waste, sometimes not so much. It might be the case that waste removal is mentioned in the quotation, as many tradespeople are happy to remove waste as part of the job. Make sure you check this, because you may be stuck with handling your own waste removal.

One of the simplest and most hassle-free ways to dispose of this waste is to hire a skip. Various sizes of skip are available to match the quantity of rubbish that you've got. Mini-skips can generally take roughly 2-3 yds of waste, midi-skips can take roughly 4-5 yds of waste, builders skips can take roughly 6-8 yds of waste and roll-on-roll-off skips can take roughly 20-25 yds of waste. Skip bags generally take approximately 1-1.5 yds of waste.

To book your skip hire in Rushden GO HERE.

Related Tasks

Screeding Related Tasks Rushden

There are a wide range of tasks that can be conducted by your local Rushden floor screeding company including bonded screed, office floor screeding in Rushden, screeding price quotes, waterproof floor screeding, cheap screeding in Rushden, underfloor heating screeds, sand floor screed Rushden, polished screeding, floor noise dampening, floor screed testing in Rushden, external screeding Rushden, concrete pumping in Rushden, final floor finishes, fibre reinforced screeding Rushden, conservatory screeding, rapid strength screeds, floating screed, latex screeds, liquid screeds in Rushden, self-levelling floor screeding, shop screeding, sand and cement screeding Rushden, damp proof membranes Rushden, flow screeding in Rushden, floor screeding tools, floor screeding in Rushden, screed flooring, structural screeds Rushden, and lots more floor screeding tasks. Listed are just a small portion of the tasks that are handled by people specialising in screeding. Rushden providers will let you know their full range of floor screeding services.

Tools Needed by a Floor Screeder

  • Trowel
  • Straight Edge
  • Dappling Bar
  • Buckets
  • Floor Profile
  • Gloves
  • Knee Protectors
  • Spade
  • Float
  • Measure
  • Heavy Duty Spirit Level

Floor Screeding Near Rushden

Also find: Wilby floor screeding, Knuston floor screeding, Irchester floor screeding, Yelden floor screeding, Caldecott floor screeding, Chelveston floor screeding, Irthlingborough floor screeding, Sharnbrook floor screeding, Great Doddington floor screeding, Bletsoe floor screeding, Wymington floor screeding, Podington floor screeding, Wollaston floor screeding, Stanwick floor screeding, Higham Ferrers screeding services and more. Most of these towns and villages are covered by companies who do screeding. Rushden home and property owners can get floor screeding estimates by clicking here.

Floor Screeding Services Rushden

Find Floor Screeding in Rushden Here
Screeding Services in Rushden Northamptonshire (01933)
  • Rushden Fast-Dry Floor Screeding
  • Rushden Screed Calculator Service
  • Rushden Indistrial Screeding
  • Rushden Floor Insulation
  • Rushden Residential Screeding
  • Rushden Screeding Advice
  • Rushden Liquid Screeds
  • Rushden Underfloor Heating Installations
  • Rushden Floor Damp Proofing
  • Rushden Cheap Screeding
  • Rushden Floor Screeding
  • Rushden Floor Levelling
  • Rushden Screeding Services
  • Rushden Fibre Reinforced Screeding

Screeding Around Rushden: People who live in the following streets and roads have recently requested floor screeding services - Co-operative Row, Clare Walk, Denton Close, Cartmel Way, Balmoral Avenue, Chapel Hill, Boughton Drive, Tintagel Close, Devon Walk, Townsend Leys, Castle Court, Arundel Court, Station Road, Bryant Way, Cottage Gardens, Charles Close, Cowslip Close, Daffodil Drive, St James Close, Dayton Street, Shirley Road, Beech Grove, Simpson Avenue, Bilsdon Close, The Hawthorns, Drayton Close, St Marys Avenue, Brooke Close, Commercial Street, Silverdale Grove, as well as these Rushden area postcodes: NN10 0GU, NN10 0JF, NN10 0LT, NN10 0FD, NN10 0HH, NN10 0BG, NN10 0AH, NN10 0JB, NN10 0ED, NN10 0GP. These areas recently saw activity by experts in floor screeding. Rushden business and home owners benefited from trusted and competent floor screeding services on each occasion.

Screeding Jobs Rushden: Browse floor screeding jobs in Rushden by going here: Screeding Jobs Rushden

If you need local Rushden info check here

Floor screeding in NN10 area, and dialling code 01933.

TOP - Floor Screeding Rushden

Floor Screeding Estimates Rushden - NN10 - 01933 - Self-Levelling Screed Specialists Rushden - Floor Levelling Rushden - Screeders Rushden - Screeding Services Rushden - Quick-Dry Screeding Rushden - Floor Screeder Rushden


(This screeding Rushden content was created by S Locke 30-06-2022)