Floor Screeding Eastcote

Eastcote Screeding & Floor Levelling Services

Floor Screeding Eastcote Greater London (HA4): If you are renovating a property or cellar, are planning to install under floor heating or have a damaged or uneven floor, then getting in touch with a professional floor screeding contractor in Eastcote is the best option. Allowing you to lay a suitable flooring material, (boards, tiles, carpets etc) over the top of it, screeding provides a smooth finish to a coarse sub-base. Screeding a floor allows you to provide a durable, quality finish for any room in your home.

Free Eastcote Floor Screeding Quotes


Whatever shape or size of room you're remodeling, a local floor screeding company in Eastcote can provide you with the expertise and proper working methods to establish a perfect base for your flooring. Once your project has been carefully assessed, they'll be in a position to advise you on the appropriate kind of screed necessary for your project, and how best it can be installed.

Floor Screeding Eastcote Greater London (HA4)

A professional screeding specialist will also inform you if a structural engineer is necessary for your project, to identify load bearing, point loadings and flex strength that your flooring might need to conform with building regulations and British Standards.

The skills and training that a qualified screeding technician brings to your project should guarantee a successful outcome and help to extend the life of your flooring. Selecting the correct screeding materials and the method of installation is critical if you want to finish up with a durable and quality finish for your floor surface.

There are numerous screeding contractors in and around Eastcote so see if you can get multiple estimates for your floor screeding project before selecting a company and know to what standard of finish is it for. For domestic properties a quotation will normally be provided for an SR (Surface Regularity) calculation of SR1 or SR2. Each of the 3 SR levels offer different qualities of finish, with SR1 being the highest, with the smallest amount of deviation over the area. Any error in the final screeding can cause problems in laying flooring owing to indentations, ridges, flat spots in the floor surface.

Floor Screeders Eastcote (020)

The regulations and guidelines set out in in the British Standards BS8204 have to be followed by all Eastcote floor screeding contractors and they should also hold accreditation with the manufacturers of any specialist screeding materials (Cemfloor, Flowcrete, Gypsol etc.) to demonstrate their competence and safe working practices. The assessment and training of a floor screeding company by such manufacturers is underlined through this accreditation scheme, and guarantees safe working practices and reliability on any screeding project involving their materials.

For the screeding of floors in restaurants, warehouses, schools, hospitals, factories and shops, dedicated Eastcote commercial screeders will be needed.


Standard Screeds - A mixture of sand and cement which is ideal for everyday domestic use. Five parts sand to one part cement is the normal mix for standard screeds. This 5 to 1 ratio standard flooring screed will set hard at a rate of one millimetre per day after application.

Industrial and Heavy Duty Screed - A screed designed for high load and heavy traffic areas where maximum strength and durability is necessary.

Self-Levelling or Liquid Screeds - When a high standard of finish is needed this compound of latex and cement is used to achieve SR1 level screed flooring. Mainly used to finish off a poor substrate level or damaged floor to enable the laying of a new flooring surface, like tiles on the top of it. They can be as little as 1mm in depth, and due to the latex polymers, will still provide a high strength finish.

Polymer Screeds - An extremely high strength solution where a reduced screed thickness is essential. Maker's guidelines for drying times vary across the product ranges.

Fibre Reinforced Screed - Used with underfloor heating systems and is the favoured option in these projects. The special fibres in the screed mix increase it's strength and durability while also protecting against thermal cracking and shrinkage. It has a setting rate of one millimetre per day.

Screeding Quotes Eastcote Greater London

Advanced Drying and Fast Drying Screeds - If there is a need to progress urgently with the work because of time restraints, this screed dries much quicker than standard screeds. The majority of the fast drying screeds are fibre reinforced and are suitable for a wide range of projects where the faster drying rate of three to seven millimetres is advantageous.


Good preparation is crucial for a high quality screed surface that will be durable and hard wearing. The original floor surface should be cleaned to remove any grease, oil, debris and paint which can affect the bond of the screeding.

Screeding Near Eastcote (HA4)

If any cleaning products are used in this process it's vital to make certain that no residues of detergents or soaps are left on the floor surface and it is permitted to dry out naturally. It's essential to mend any crevices or cracks in the base to prevent them being visible and "travelling" up into your freshly screeded floor. A site survey will enable your Eastcote screeding installer to take note of this preparation work and tackle it before starting to pour the screeding.

Before any screeding can be laid a damp proof membrane (DPM) must be put down to protect the final flooring and screed from moisture. Different gauges of special polythene might be used as a DPM and also serve as a barrier for the screed and any insulation panels.

If the area where you live is susceptible to radon gas then an additional barrier is needed to stop the gas from entering from the ground. If radon occurs in severe doses then a complete extraction and ventilation system may be installed underneath the screed which will extract any gases that might seep in from the ground.

As soon as these steps have been taken the screeders will apply a primer or sealant to the prepared base. These primers and sealers will guarantee the screed bonds properly to the base surface and help to achieve a good quality finished floor. These substances need professional contractors to apply them in the right proportions by using tailor-made equipment, such as airless sprays.

If you're installing underfloor heating, now is the time that it will need to be properly laid out and installed. Insulation panels will be arranged and the wires and heating pipes will be firmly attached so there's no movement while the screed is applied. Under floor heating is one of the most efficient ways to heat a room and a properly installed system should deliver even warmth all over the floor.

Floor Screed Eastcote (020)

If you're not fitting under floor heating the screed can now be mixed and prepared on site and laid. The requirements of the room will determine the type of screeding that's used. For quick drying and advanced screeds there'll be at least 24 hours delay before it is able to be walked over, and a further 3 days minimum before you can install any flooring materials. If you're aiming to end up with a nicely finished and hard-wearing floor surface you should stick to the manufacturer's guidelines with regard to standard and heavy duty screeds where this time period will be increased.

You can test the SR standard of the finished screeding as soon as it is set enough to walk on. The basic SR test uses a two metre long straight-edge to check for any variations in the screeded surface.

  • SR1 - Deviations of three millimetres or less as measured across the entire area shows your screed floor to be of the highest quality and classed as SR1.
  • SR2 - The standard flooring in industrial and commercial builds is normally SR2 and has a maximum deviation of 5mm across the whole floor.
  • SR3 - For utility floors where the quality of finish is fairly immaterial SR3 is the classification and has a deviation measurement of ten millimetres or less.

If you need to check the floor for load bearing, a structural engineer is needed to carry out the testing. Using specialist equipment the engineer will verify the screed strength and suitability of use in a load bearing environment. This can include what is known as a "drop hammer test" which assesses various aspects of the flexibility and strength of the screed. Only qualified structural engineers following the British Standards BS8204 guidelines are allowed to carry out such tests and sign off on the structural integrity of screed flooring. (Tags: Floor Screeding Eastcote, Screeding Eastcote, Floor Screeding Services Eastcote, Floor Screed Eastcote).

Floor screeding services are available in Eastcote and also in nearby places like: Horsenden, Headstone, Northwood Hills, Rayners Lane, Perivale, Sudbury Hill, Northwick Park, Newyears Green, Wealdstone, Roxeth, and in these postcodes HA5 2SY, HA5 1ST, HA5 2RN, HA5 1QG, HA4 8EE, HA5 1PP, HA5 2JS, HA5 2TB, HA5 2SE, HA5 1QH. Locally based Eastcote floor screeders will most likely have the postcode HA4 and the telephone dialling code 020. Checking this should ensure that you access local screeding. Eastcote homeowners will be able to benefit from these and many other similar services.

Book a Screeder in Eastcote UK

Latex Screed Eastcote

When a certain degree of flexibility is necessary in a floor's surface you may find that the use of a latex screeding will be advantageous. Latex floor screeds come in two parts - a bag and a bottle - with the bottle containing latex liquid and the bag containing a cement based powder. Where water is normally used in a screed mix, this is replaced with the liquid latex, which makes it more flexible than standard screeds, and quicker drying.

Before the installation of your chosen decorative covering, this latex product is used for levelling-out subfloors. This screed is appropriate for substrate made from stone tiles, asphalt, concrete, wood or sand/cement, is perfect for the application of flooring adhesives and gives a resilient and smooth surface. If there is any movement in the sub-floor this latex screeding will provide a crack-free, flexible finish on which to lay your final floor coverings.

When using a "floating" screed, for example when screed is being laid over underfloor heating, depths of 50mm-65mm may be necessary, and latex screeds are not a suitable choice in this instance.

Related Tasks

Screeding Related Tasks Eastcote

There is a wide range of work that can be conducted by your local Eastcote floor screeder including school floor screeding, concrete screeding, fibre reinforced floor screeding, shop floor screeding, coloured floor screeding Eastcote, floor screeding price quotes, rapid dry screeds in Eastcote, screeded kitchen floors, concrete pumping, acoustic flooring, screeding repairs, bonded concrete screeding, floor resurfacing, floor levelling Eastcote, resin floor screeds Eastcote, decorative floor screeding Eastcote, floor screeding tools, floor preparation services Eastcote, garage floor screeding, waterproof screeding, floor screed testing, floor insulation, rapid strength floor screeding, sand screeding, basement screeding Eastcote, flow screeding, professional floor levelling services in Eastcote, screed flooring, sand and cement floor screed Eastcote, floor renovation, damp proof membranes Eastcote, final floor finishes, floor noise dampening in Eastcote, and more floor screeding tasks. Listed are just an example of the duties that are undertaken by those installing floor screeding. Eastcote companies will be happy to tell you about their full range of services.


Floor Screeding Near Eastcote

Also find: Headstone floor screeding, Horsenden floor screeding, Perivale floor screeding, Wealdstone floor screeding, Rayners Lane floor screeding, Northwood Hills floor screeding, Newyears Green floor screeding, Sudbury Hill floor screeding, Northwick Park floor screeding, Roxeth screeding services and more. The majority of these towns and villages are catered for by companies who do floor screeding. Eastcote homeowners can get estimates by clicking here.

Floor Screeding Services Eastcote

Find Floor Screeding in Eastcote Here
Screeding Services in Eastcote Greater London (020)
  • Eastcote Floor Insulation
  • Eastcote Floor Damp Proofing
  • Eastcote Floor Screeding
  • Eastcote Fibre Reinforced Floor Screeding
  • Eastcote Polished Screed Floors
  • Eastcote Cheap Floor Screeding
  • Eastcote Coloured Floor Screeding
  • Eastcote Liquid Screeds
  • Eastcote Commercial Screeding
  • Eastcote Residential Screeding
  • Eastcote Floor Levelling
  • Eastcote Screeding Services
  • Eastcote Underfloor Heating Installation
  • Eastcote Fast-Dry Floor Screeding

Screeding Around Eastcote: In Highgrove Way, Stevens Close, Kent Gardens, Broadwood Avenue, Rodney Gardens, Winslow Close, Robarts Close, Meadway Gardens, Lovatt Drive, Crescent Gardens, Yeomans Acre, Armstrong Close, Glenalla Road, Flag Walk, Barnhill, Laburnum Grove, Widenham Close, Grangewood Close, Coteford Close, Fore Street, Hume Way, Hale End Close, Mead Way, Mount Park Road, Plough Farm Close, Brook Close, as well as the following Eastcote area postcodes: HA5 2SY, HA5 1ST, HA5 2RN, HA5 1QG, HA4 8EE, HA5 1PP, HA5 2JS, HA5 2TB, HA5 2SE, HA5 1QH, property owners have just recently needed local floor screeding. These areas recently saw activity by experts in screeding. Eastcote home and business owners enjoyed high quality and dependable floor screeding services.

To get local information relating to Eastcote, Greater London check here

Floor screeding in HA4 area, telephone code 020.

TOP - Floor Screeding Eastcote

Floor Levelling Services Eastcote - Screeding Eastcote - Industrial Screeding Eastcote - Floor Screeding Near Me - Underfloor Heating Eastcote - Screeding Services Eastcote - Floor Screed Contractors Eastcote - Self-Levelling Screed Specialists Eastcote - Floor Screeding Quotes Eastcote


(This screeding Eastcote page was compiled on 12-03-2023)