Floor Screeding Olney

Olney Screeding & Floor Levelling Services

Floor Screeding Olney Buckinghamshire (MK46): You should speak to a floor screeding professional in Olney if you are hoping to install under floor heating, are renovating a property or basement or have an uneven or damaged floor. To provide you with a good foundation for you final flooring material, a screed is used to produce a smooth floor surface over a concrete sub-base. If you want your floors to last a long time then a floor screed is the most important factor in any building or renovation project.

Free Olney Floor Screeding Quotes


Whatever size or shape of room or area you're remodeling, a local floor screeding company in Olney will provide you with the experience and proper working methods to establish the perfect base for your flooring. They'll be able to assess your project and ascertain the correct type of screed you need and how best to apply it.

Floor Screeding Olney Buckinghamshire (MK46)

It might be necessary, according to the intended use of the space, for a structural engineering survey to abide by building regulations on flex strength, point loadings and load requirements of the screed floor.

Bringing in a qualified and highly trained specialist will ensure you get the proper kind of screed for the room's anticipated usage to extend the life of your floor. The correct blend of screed and the way it is laid is also important to ensure the ultimate durability of your floor.

Before choosing a floor screeding specialist from any operating in the Olney area, ask to what standard of finish they're basing their price quote, and also ensure you get two or three estimates. The quotation may be based on what is called the SR, or Surface Regularity number. Each of the three SR levels provide different levels of finish, with SR1 being the highest quality, with the least amount of deviation over the area of the floor. An SR2 or SR3 standard could mean there will be ridges or flat spots that may cause problems when putting down your final flooring surface (carpet, tile, wood etc).

Floor Screeders Olney (01234)

The regulations laid down in the British Standards BS8204 have to be followed by any Olney floor screeding company and they should also be accredited by the manufacturers of any specialist screeding materials (Flowcrete, Gypsol, Cemfloor etc.) to prove their competence and safe working practices. A contractor holding accreditation proves they've been trained and assessed in the use of these screeding products and can offer a high quality service in all aspects of their installation.

Commercial screeders in Olney will generally tackle larger floor screeding projects in hospitals, factories, shopping centres, boutiques, schools and warehouses.


Standard Screeds - A mixture of cement and sand which is acceptable for normal domestic use. The ratios involved in standard screeds are 5 parts sand to 1 part cement. The standard flooring screed dries at a rate of 1mm thickness each day.

Polymer Screeds - When a reduced thickness of floor is needed due to building factors, a polymer screed provides a high strength solution to this situation. Polymer screeds are available from many manufacturers and owing to their diverse chemical compositions have specific curing times for each product.

Fibre Reinforced Screed - Mostly used with underfloor heating systems and is the advised option in such projects. The special fibres in this screed mix improve overall strength and durability whilst also safeguarding against thermal cracking and shrinkage. At roughly 1mm per day, it has a similar drying rate to standard screed.

Industrial and Heavy Duty Screed - Where levels of traffic are high or heavy loading of the floor is required, heavy duty screeds offer maximum strength and durability.

Screeding Quotes Olney Buckinghamshire

Fast Drying and Advanced Drying Screeds - If there is a need to press ahead urgently with the work due to time constraints, these screeds dry more speedily than standard screeds. Most of the fast drying screeds are fibre reinforced and are appropriate for a whole host of projects where the speedier drying rate of three to seven millimetres is a big advantage.

Self-Levelling or Liquid Screeds - When the highest possible standard of finish is necessary this mix of of cement and latex is employed to achieve SR1 level floor screeding. Typically used to finish off a damaged floor or poor substrate level in order to lay a new flooring surface, like tiles on top of it. Even with a thickness of one millimetre, the latex polymers within the mixture provide a high strength surface for a wide variety of uses.


To ensure the screeding is of a good quality finish that is durable and hard wearing, time should be devoted to preparing the area before any screed is laid. It is important that all contaminants such as debris, grease, paint or oil is eliminated from the floor before pouring any screed, because these can affect the adhesion process that a quality screed demands.

Screeding Near Olney (MK46)

If any products are used during this stage it's important to make sure that no residues of detergents or soaps are left on the surface and it is allowed to dry out naturally. It's necessary to fix any crevices or cracks in the floor surface to prevent them being mirrored and "travelling" upwards into your newly screeded floor. During a site survey the screeding installer will be able to see what preparation work is necessary before starting to work on the actual screeding.

Before the screeding can be poured a damp proof membrane (DPM) must be put down to shield the screed and final flooring from moisture damage. The damp proof membrane is made out of thick polythene and different layers may be used to act as a moisture barrier for the screed.

An additional airtight barrier may be needed if your home or business premises is in an area which is known to be susceptible to radon gas emissions. If radon occurs in severe doses then a complete extraction and ventilation system may be installed underneath the screed which will remove any gases that could seep in from the ground.

As soon as the base has been prepared and any membranes installed, a sealant or primer is then put on. These primers and sealers will ensure the screed bonds successfully to the base and help to accomplish a high quality finished floor. These materials require skilled tradesmen to apply them in the correct ratios by using tailor-made equipment, such as airless sprays.

Before the screeding is laid, any underfloor heating will now be installed. Insulation panels can be put in position and the cables and heating pipes will be firmly mounted so that there is no movement whilst the screed is being poured. Warmth will be evenly spread across the floor in a skillfully installed underfloor heating system, and coupled with it being an effective choice of heating, it's a great choice for most Olney home renovation projects.

Floor Screed Olney (01234)

If you aren't installing under floor heating the screed will now be mixed and prepared on site and poured. Your proposed use of the room will help your screeding contractor on which kind of screed is appropriate for your needs. For quick drying and advanced screeds there will be at least a 24 hour delay before it is able to be walked on, and a further 72 hours minimum before any flooring material can be fitted. Manufacturer's drying instructions for standard and heavy duty screeds must be followed so as to achieve a quality finish and provide an even and stable floor surface.

You can evaluate the SR standard of the finished screed once it is hard enough to walk on. The standard SR test involves the use of a 2m straight edge to check for any fluctuations in the screed surface.

  • SR1 - Deviations of 3 millimetres or less as measured across the entire floor area shows your screeding to be of the best quality and is classed as SR1.
  • SR2 - If the screed has a deviation from the straight-edge of 5 millimetres or less it is considered SR2 level and is the normal standard for industrial and commercial floors.
  • SR3 - For a utility area or room where the finish is relatively immaterial the SR3 is the standard and has a maximum deviation measurement of 10 millimetres or less.

There may also be a requirement for a structural engineer to carry out a soundness test. Using specialised equipment the structural engineer will evaluate the screeded surface strength and its suitability for use in a load bearing environment. The screed layer should be subjected to a "drop hammer test" to gauge flexibility and strength in different areas. Any screed floor that has load bearing requirements must be approved by a qualified structural engineer obeying the British Standards BS8204 guidelines. (Tags: Floor Screeding Services Olney, Floor Screeding Olney, Screeding Olney, Floor Screed Olney).

Book a Screeder in Olney UK

Screeding is available in Olney and also in: Turvey, Ravenstone, Harrold, Stevington, Bozeat, Filgrave, Cold Brayfield, Sherington, Astwood, Hardmead, Newton Blossomville, Lavendon, Clifton Reynes, Chichekey, Pavenham, Eakley, Weston Underwood, Horton, Emberton, and in these postcodes MK46 4DN, MK46 5DU, MK46 5LA, MK46 4BU, MK46 5FQ, MK46 5NP, MK46 4AW, MK46 5ED, MK46 4AL, and MK46 5FE. Locally based Olney floor screeders will most likely have the dialling code 01234 and the postcode MK46. Checking this out will confirm you access locally based floor screeding. Olney householders can utilise these and various other similar services. Click on the "Quote" banner to make enquiries and obtain price quotes for screeding.

What Does Screeding Do?

Construction projects benefit from the various important functions of screeding:

  1. Underfloor Heating System Support.
  2. Even Load Distribution.
  3. Surface Protection.
  4. Stability and Structural Integrity.
  5. Compatibility with Floor Finishes.
  6. Improving Sound and Thermal Insulation.
  7. Corrections to Subfloors.
  8. Smoothing and Levelling.

All in all, a durable, level and stable floor surface is achieved through the vital role of screeding. The floor finish is assured of a solid foundation, ensuring its maintenance of aesthetics and quality, and ability to withstand the demands of everyday use for many years to come.

Screed Reinforcement

To enhance the strength and durability of concrete screeds, screed reinforcement is utilised. Applying thin, flat layers of concrete to a base layer is the method used to create level surfaces, which are called screeds. Commonly, they are used in construction projects as flooring, but they can also function as a finishing layer for walls and ceilings.

Floor Screed Reinforcement

To enhance strength and prevent cracking, reinforcement materials like fibres, wire or steel mesh are included in the screed mixture during installation. This reinforcement helps the surface to evenly distribute load and weight, as well as improve its ability to resist abrasion, thermal changes and impact.

Proper installation of the reinforcement is crucial to make sure that it is uniformly distributed throughout the screed and does not get displaced over time. With the use of screed reinforcement, professional screeders can make sure that their projects are built to withstand the test of time and provide a functional, high-quality surface for many years to come.

Granolithic Screeding

Granolithic screeding is a process of creating a smooth and even surface for floor coverings like carpets or tiles. It involves mixing sand, cement, and aggregate such as granite or marble chips to form a mixture, which is then applied to a concrete sub-base. The mixture is levelled with a straight edge to give it a smooth, seamless surface.

Granolithic screeding is frequently used in industrial and commercial buildings and also in high-traffic areas in residential buildings. It is also commonly used in areas where abrasion and chemical resistance are essential. The resulting surface is smooth and hard, which makes it easy to clean and maintain, and provides an outstanding base for other flooring products.

Granolithic screeding is typically applied over a concrete base, and the surface is generally treated with a curing compound to ensure it sets properly. As soon as it has cured, it creates a seamless floor with a smooth, hard surface that is resistant to wear and tear. It is also resistant to water and chemicals, which makes it suitable for use in environments where there's a risk of spills or exposure to dangerous materials.... READ MORE.

Screed Floor Removal Olney

Removing a screed floor necessitates the extraction and elimination of the existing screed from the surface. Upgrading or refurbishing a a floor in Olney often entails the need for it. The removal process relies on specialised equipment and techniques to break down and remove the screed layer with effectiveness. The preparation of the surface for new flooring material or other alterations is made possible by this. Expert professional contractors in screed floor removal meticulously eliminate the old screed, guaranteeing efficiency and safety, and allowing the floor to embark on a fresh journey, whether for repairs, upgrades or changes in design. (62299 - Floor Screed Removal Olney)

Screeding Related Tasks

Screeding Related Tasks Olney

There are a wide range of tasks that can be accomplished by your local Olney floor screeding company including quick-dry floor screeds, final floor finishes, external screeding, professional floor levelling services in Olney, residential screeding in Olney, rapid strength floor screeds, bonded screed, thin bed floor screeding Olney, monolithic screeding, bathroom floors, shop screeding in Olney, floor smoothing compounds Olney, screeded kitchen floors, concrete floor toppings in Olney, floor screeding in Olney, underfloor heating installation, screed aftercare, decorative floor screeding Olney, pumped screed installation, screed surveys & testing, anhydrite screeds, coloured floor screeding Olney, polished concrete flooring, screed floor removal in Olney, polished floor screeding in Olney, floor screed testing, commercial floor screeding, latex screed, unbonded screed in Olney, floor screeding tools Olney, flow screeding, garage screeding, floating screed, subfloor repair, granolithic floor screeds, and more floor screeding tasks. These are just some of the tasks that are accomplished by people specialising in floor screeding. Olney professionals will be happy to inform you of their full range of screeding services.

Floor Screeding Near Olney

Also find: Filgrave floor screeding, Emberton floor screeding, Astwood floor screeding, Stevington floor screeding, Harrold floor screeding, Horton floor screeding, Clifton Reynes floor screeding, Chichekey floor screeding, Lavendon floor screeding, Turvey floor screeding, Weston Underwood floor screeding, Bozeat floor screeding, Newton Blossomville floor screeding, Ravenstone floor screeding, Sherington floor screeding, Pavenham floor screeding, Eakley floor screeding, Hardmead floor screeding, Cold Brayfield floor screeding and more. There are contractors who do screeding in all these places. To deliver the best quality flooring solutions, these experienced specialists have the required expertise and skills. Whether it’s for domestic or commercial properties, they are proficient in screeding and make sure that the work is completed to the highest standards. By simply clicking here, local home and business owners can get screeding estimates.

TOP - Floor Screeding Olney

Floor Screed Contractors Olney - Screeding Olney - Floor Screeding Near Me - Screeding Quotes Olney - Residential Screeding Olney - Floor Screeding Companies Olney - Floor Screeding Olney - Screeding Services Olney - Underfloor Heating Olney


(This screeding Olney page was created on 22-05-2024)