Floor Screeding Stalham

Stalham Screeding & Floor Levelling Services

Floor Screeding Stalham Norfolk (NR12): If you are renovating a property or basement, have a damaged or uneven floor or are aiming to install underfloor heating, then contacting a professional floor screeding company in Stalham is the best solution. To provide a firm foundation for your choice of top flooring material, screeding is used to generate a smooth floor on top of a concrete sub-base. Screeding a floor enables you to provide a high quality and durable finish for any room in your property.

Free Stalham Floor Screeding Quotes


It doesn't matter how large or small the room is that you require to be levelled, a professional floor screeding contractor in Stalham will have the appropriate expertise, equipment and know-how to offer you an excellent standard of service. After analyzing your project they will advise you on the perfect choice of screeding and which technique for laying it is most appropriate for your situation.

Floor Screeding Stalham Norfolk (NR12)

It may be a requirement, contingent on the intended use of the space, for a structural engineering survey to abide by building regulations on point loadings, flex strength and load bearing of the screed floor.

The training and skills that a screeding technician brings to your project will guarantee a high quality result and help to prolong the lifetime of your floor or floors. Picking the appropriate screeding materials and the method of installation is crucial if you want a quality and durable finish for your floor.

Before deciding upon a floor screeding company from the many based in the Stalham area, ask to what standard of finish they are basing their quotation, and also make certain you get two or three quotes. The quote might be based on what is known as the SR, or Surface Regularity calculation. SR1 is the highest level, and while SR2 and SR3 might seem cheaper at first glance, they don't guarantee a totally even or flat surface. An SR2 or SR3 level could mean there will be ridges or flat spots that could cause issues when putting down your final flooring materials.

Floor Screeders Stalham (01692)

Every Stalham screeding company has to adhere to British Standards (BS8204) and ought to have some form of accreditation from screeding material and equipment manufacturers, e.g. Cemfloor, Gypsol, Flowcrete. This accreditation scheme illustrates a company's performance and training in the application of a manufacturer's products.

Stalham commercial screeders may be involved in the screeding of floors in factories, warehouses, schools, pubs, shopping centres and hospitals.


Standard Screeds - Frequently used in residential projects where the mix of sand and cement is ideal for everyday floor traffic use. This mix comprises a 5:1 ratio of sand to cement. The standard flooring screed will dry at a rate of 1mm thickness each day.

Polymer Screeds - Provides a high level of strength with a lower thickness. Manufacturer's guidelines for curing times differ across the various product ranges.

Self-Levelling or Liquid Screeds - A cement and latex material which can produce the highest standard of finish to SR1 levels. The self-levelling compound provides a clean and smooth surface over a rough substrate or damaged floor to allow all flooring materials to be laid. The liquid screed can be laid to a thickness of only 1mm, but still provides a strong surface for a wide variety of flooring finishes.

Screeding Quotes Stalham Norfolk

Fast Drying and Advanced Drying Screeds - As the name suggest, these screeds dry at a quicker rate and allow you to use the floor area much faster. Drying at a rate of 3-7mm, determined by the specialised mix, they are typically a fibre reinforced screed and are suitable for projects that have tight schedules.

Fibre Reinforced Screed - The favourite choice of professional installers for use in combination with underfloor heating systems. The increased strength and flexibility offered by the special fibres in the screed mix help protect the flooring from thermal cracking and shrinkage. At approximately 1mm per day, it has the same drying rate to standard floor screed.

Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading on the floor is needed, heavy duty screeds deliver maximum durability and strength.


Screeding installers will have to prepare all areas before proceeding with any other work in order to guarantee a high quality and hard wearing screed flooring. It's vital that all contaminants such as paint, oil, debris or grease is eradicated from the base before laying any screed, since these can affect the adhesion process that a quality screed demands.

Screeding Near Stalham (NR12)

If any cleaning products were used in this process it is crucial to make certain that no residues of detergents or soaps are left on the surface and it is permitted to dry out naturally. It is necessary to repair any cracks or crevices in the floor surface to stop them being visible and "travelling" up into your freshly screeded floor. An experienced Stalham screeding company will take note of such problems during a on-site survey and make sure that all preparations are completed before moving on to the next stages of the screeding process.

A DPM (damp proof membrane) will be applied once the preparation work has been finished to prevent ground moisture getting into the flooring materials and screeding. There could be two or three layers of different thicknesses of polythene to act as a barrier between the insulation layer and screed.

If the area where you live is susceptible to radon gas then an additional barrier is essential to prevent the gas from entering from the ground. If radon occurs in severe doses then a complete extraction and ventilation system might be needed beneath the screed which will remove any gases that could seep in from the ground.

As soon as these stages have been completed the screeders will put on a sealant or primer to the prepared floor base. These sealers and primers will make sure that the screed bonds effectively to the base surface and help achieve a top quality finished floor. Equipment such as airless sprays can be used to apply a primer or sealant, which should be done by experienced screeding companies in Stalham observing the manufacturer's guidelines and safety advice.

Now is the time that under floor heating can be installed and laid out in the correct manner. Insulation panels can be laid out and the cabling and heating pipes will be securely attached so that there is no movement while the screed is being applied. Under floor heating is one of the most effective ways to heat a room and a skillfully installed system should deliver even level of warmth across the floor area.

Floor Screed Stalham (01692)

The screed can now be prepared in situ and spread onto the floor surface. The requirements of the room will dictate the form of screeding that's used. Be aware that even advanced and quick drying screeds have a minimum of twenty four hours before you can walk on any screeded surfaces and at least 72 hours before any floor coverings can be applied. If you're using heavy duty or standard screeds the setting time is increased and you must follow the manufacturer's guidelines so as to get the best finish for your floor.

As soon as the screed has set it can be checked for quality to ascertain the SR level. The standard SR test uses a 2m straight edge to check for any variations in the screed surface.

  • SR1 - Deviations of three millimetres or less being measured over the entire area shows your screed floor to be of the finest quality and categorised as SR1.
  • SR2 - The standard flooring in commercial and industrial builds is normally SR2 and has a maximum possible deviation of five millimetres across the whole screeded surface.
  • SR3 - SR3 is basic utility standard where a perfect quality finish isn't necessary. This specification allows for a maximium deviation depth of 10 millimetres.

It may also be necessary for a structural engineer to do a soundness test. Using specialised equipment the engineer will ascertain the screed strength and its suitability for use in a load bearing environment. The screed layer will be subjected to a "drop hammer test" to measure strength and flexibility in various areas. The precise testing and measurement tools involved mean this can only be undertaken by a qualified structural engineer obeying the BS8204 guidelines. (Tags: Floor Screeding Services Stalham, Floor Screed Stalham, Floor Screeding Stalham, Screeding Stalham).

Book a Screeder in Stalham UK

Multi-Coloured Floor Screeds

Typically, multi-coloured screeds are the preferred flooring material for commercial or industrial settings. A combination of coloured resins, aggregates, and sealants is used to create these screeds, resulting in a decorative and distinctive finish. Their durability and slip-resistant properties make them a popular choice for areas with heavy footfall or machinery.

Customising multi-coloured screeds is an effective way to match the brand of a business or create a particular aesthetic in a space. Their easy-to-clean and maintain properties make them a favourite option for facilities that require a high standard of hygiene. The ability to select aggregates based on size, shape, and colour in coloured screeds gives architects and designers the flexibility to create bespoke flooring designs that meet their specific project parameters. Overall, the versatility and practicality of multi-coloured floor screeds make them a flooring solution that can provide both style and function to any commercial or industrial space.

Screed Reinforcement

To enhance the durability and strength of concrete screeds, screed reinforcement is utilised. To create a level surface, a base layer is coated with thin and flat layers of concrete called screeds. Their typical application in construction projects is as flooring, although they can also be used as a finishing layer for ceilings and walls.

Floor Screed Reinforcement

Embedding reinforcement materials, like steel mesh, fibres or wire, into the screed mixture during installation is done to prevent cracking and enhance strength. This reinforcement helps to distribute the weight and load of the surface evenly, while also improving its resistance to abrasion, thermal changes and impact.

Correct installation of the reinforcement is crucial to make sure that it is evenly distributed throughout the screed and doesn't get displaced over time. Screed reinforcement is a vital component in maintaining the structural integrity and quality of screeds, ensuring a reliable and long-lasting surface for many different applications.

Latex Floor Screed

When the surface of a floor needs a certain amount of flexibility, it may be best to use a latex screeding. Latex floor screeds come in 2 parts - a bag and a bottle - with a bottle that contains liquid latex, and a bag that contains a cemetitious powder. Latex screeds are quicker drying and more flexible than standard screeds, because the water that is normally used is exchanged for the liquid latex.

This latex product is used for levelling subfloors prior to the laying of the final decorative covering. Suitable for sub-floors of sand/cement, asphalt, quarry tiles, wood and concrete, this gives a perfect surface for the application of adhesives that's smooth and durable. If there happens to be any movement in the sub-floor this type of latex screeding will provide a crack-free, flexible finish on which you can lay your chosen floor coverings.

When using a "floating" screed, for example when screeding is being laid over underfloor heating, thicknesses of 50 to 75 millimetres may be desirable, and latex flooring screeds are not a suitable choice in this case.

Screed Floor Removal Stalham

The procedure of removing screed from a surface involves extracting and eliminating the pre-existing layer. When upgrading or refurbishing a floor, it is frequently essential. Specialist equipment and techniques play a crucial role in breaking down and removing the layer of screed effectively during the removal process. Preparation of the surface for new floor covering or other alterations becomes achievable through this. With expertise in screed floor removal, contractors proficiently and safely remove the old screed, offering the floor a renewed opportunity for upgrades, design modifications or repairs. (54332)

Screeding Related Tasks

Screeding Related Tasks Stalham

There is a variety of work that can be carried out by your local Stalham floor screeder including decorative floor screeding Stalham, rapid strength floor screeds, latex screed, rapid drying screeds, school floor screeding, coloured floor screeding Stalham, concrete screeding Stalham, polished screeding, screed surveys & testing Stalham, floor preparation services, fibre reinforced screeding in Stalham, screeded bathroom floors, conservatory floor screeding Stalham, floor noise reduction Stalham, floor moisture testing services, monolithic screeding, pumped floor screeds Stalham, kitchen floors, external screeding, anhydrite floor screeding, sand screed, structural screeds, bonded screed in Stalham, shop screeding, granolithic floor screeds, self-levelling screeding in Stalham, wet room floors in Stalham, concrete floor toppings in Stalham, unbonded screed Stalham, floor screeding price quotes, screed pump hire, professional floor levelling services in Stalham, floor resurfacing Stalham, floor smoothing compounds in Stalham, concrete pumping, and lots more floor screeding tasks. Listed are just a selection of the tasks that are carried out by people specialising in floor screeding. Stalham providers will be delighted to keep you abreast of their entire range of screeding services.

Floor Screeding Near Stalham

Also find: Wayford floor screeding, Honing floor screeding, Pennygate floor screeding, Eccles-on-Sea floor screeding, Dilham floor screeding, Ingham Corner floor screeding, Low Street floor screeding, Lessingham floor screeding, Calthorpe Street floor screeding, Happisburgh Common floor screeding, East Ruston floor screeding, Brumstead floor screeding, Stalham Green floor screeding, Whimpwell Green floor screeding, Sea Palling floor screeding, Ingham floor screeding and more.

TOP - Floor Screeding Stalham

Floor Screeding Companies Stalham - Self-Levelling Screeding Stalham - Industrial Screeding Stalham - Screeding Services Stalham - Floor Screeding Quotations Stalham - Floor Levelling Services Stalham - Domestic Screeding Stalham - Screeding Stalham - Floor Screeding Near Me


(This screeding Stalham page was generated on 17-10-2023)