Floor Screeding Bangor Northern Ireland (BT19): A floor screeding professional can help with renovations, help install underfloor heating or level a damaged or uneven floor on your Bangor home, when necessary. A screed is used to create a smooth floor on top of a concrete sub-base and provide a solid base for you final flooring material. The screed is a vital procedure to guarantee a durable and quality finish to the whole floor structure.
FLOOR SCREEDING CONTRACTORS BANGOR
A reputable floor screeding contractor in Bangor will have all the experience and knowledge to help you achieve a perfect floor in whichever size room you're renovating. They will assess your project and determine the appropriate kind of screed you need and how best to apply it.
The screeding specialist will also notify you if a structural engineer is required for your undertaking, to evaluate flex strength, point loadings and load bearing that your flooring may require to conform with current building regulations and British Standards.
Qualified and skilled tradesmen are imperative for a successful result and will extend the lifespan of your floor through the use of the correct form of screed for your room's anticipated purpose. There are numerous types of screed and picking the correct mix and laying technique is critical to achieve a high quality floor that's fit for purpose and durable.
There are numerous screeding contractors in the Bangor area so make sure you get multiple estimates for your floor screeding project before picking a company and know to what standard of finish it's for. The quotation could be based on what is called the Surface Regularity, or SR figure. SR1 is the highest level, and whilst SR2 and SR3 might be less expensive initially, they do not guarantee a perfectly flat or even surface. Any errors or imperfections in the screeding (as might occur with SR2 or SR3) may cause issues with laying flooring because of ridges, flat spots, indentations in the floor surface.
Every Bangor screeding company has to observe British Standards (BS8204) and should have some kind of accreditation from screeding material and equipment manufacturers, for instance Gypsol, Cemfloor, Flowcrete. The assessment and training of a floor screeding company by such manufacturers is emphasised by the use of the accreditation scheme, and guarantees reliability and safe working practices on any project involving their materials.
Bangor commercial screeders may be involved in screeding floors in factories, pubs, shops, schools, warehouses and hospitals.
TYPES OF SCREED
Standard Screeds - A mixture of cement and sand which is good for everyday residential usage. This mix uses a 5 to 1 ratio of sand to cement. Once laid this 5:1 ratio will dry at a rate of 1mm per day.
Fibre Reinforced Screed - The favoured option where under floor heating is being installed in residential homes in Bangor. This is because of the increased strength and protection against thermal shrinkage and cracking provided by the special fibres within the screed. It sets at an identical rate to a standard screed of 1mm per day.
Industrial and Heavy Duty Screed - Where traffic levels are high or heavy loading of the floor is required, heavy duty screeds deliver maximum durability and strength.
Liquid or Self-Levelling Screeds - When a high standard of finish is required this mixture of cement and latex is employed to achieve SR1 level screed flooring. Typically used to finalise a poor substrate level or damaged floor to enable the laying of a new flooring surface, such as vinyl planks over it. Even with a thickness of one millimetre, the latex polymers within the screed provide a high strength surface for a wide range of uses.
Advanced Drying and Fast Drying Screeds - If you have to use the area in question at the earliest opportunity a fast drying screed might be a good choice. Drying out at a rate of 3-7mm, depending on the specialised mix, they're typically a fibre reinforced screed and are ideal for flooring projects that have tight deadlines.
Polymer Screeds - A high strength solution where a reduced screed thickness is needed. Due to their different chemical compositions, polymer screeds have varying curing times which you can verify by studying manufacturer's guidelines.
SCREEDING PREPARATION AND INSTALLATION
To make sure the screeding is of a good quality finish that's hard wearing and durable, time should be devoted to preparing the area prior to any screed being laid. It's crucial that any contaminants such as oil, debris, paint or grease is removed from the base before laying any screed, because these can affect the adhesion capability that a good quality screed demands.
If any products are used during this stage it's vital to ensure that no residues of soaps, detergents or other cleaning products are left on the surface and it is allowed to dry out naturally. At this point cracks should be repaired since these can easily travel up through your laid screed and be reflected in the completed surface. During a site survey the screeding installer will ascertain what preparation work is required before starting to work on the screeding.
To protect the flooring materials and screeding layer from moisture rising up through the ground, a damp proof membrane (DPM) must be laid. Different gauges of special polythene may be used as a damp proof membrane and also act as a barrier for the screed and any insulation material.
If your property is situated in an area where radon is found an extra barrier layer is needed to prevent radon gas from getting through. This could be just a simple air-tight membrane, or in more serious instances a ventilation system will be installed under the floor screed to extract any inflow of air and gas from ground level.
The final phase of the surface preparation process is the painting or spraying of a sealer or primer. A primer helps with the screed to successfully bond to the base and different types exist according to which screed type is being used. These products need trained tradesmen to apply them in the appropriate proportions by using airless sprays and other custom-built equipment.
If required, this is the time that underfloor heating can be laid out in the correct manner and installed. The cables and heating pipes are securely attached to insulation panels to prevent any movement and make sure that they are laid in the correct position. Underfloor heating is one of the most effective ways to heat a room and an expertly installed system will deliver even level of warmth across the floor area.
If you are not installing under floor heating the screed can now be mixed and prepared on site and poured. Your use of the room will assist the screeding contractor on which form of floor screed is right for your needs. Don't forget that even quick drying and advanced screeds have a minimum of twenty four hours before you can walk over any laid surfaces and a minimum 72 hours before any flooring can be applied. If you are using heavy duty or standard screeds the drying time is longer and the manufacturer's guidelines must be followed so as to get the best possible finish to your floor.
The SR level of your screed can be ascertained once it's set sufficiently to be walked upon. The basic SR test uses a 2m long straight-edge to check for any fluctuations in the screeded surface.
- SR1 - Over the whole area, if there are no deviations of more than 3 millimetres from the straight-edge, then you've got a top quality SR1 standard surface.
- SR2 - SR2 is the classification for standard floors in commercial and industrial projects and can deviate from the straight-edge by up to five millimetres.
- SR3 - For utility floors where the finish is fairly inconsequential the SR3 is the classification and has a maximum deviation measurement of 10 millimetres or less.
If your screed floor has been installed with specific load bearing requirements in mind then a structural engineer will be necessary to conduct the tests. The testing will ensure your new screed surface is viable for the load bearing requirements specified in the original site survey. This will include a "drop hammer test" which records specific data on the strength and flexibility of the screed. Any screeding that's got point load requirements must be approved by a fully qualified structural engineer following the British Standards BS8204 regulations. (Tags: Floor Screeding Services Bangor, Floor Screed Bangor, Screeding Bangor, Floor Screeding Bangor).
Floor screeding services are available in Bangor and also in: Anglesey, Llanfairfechan, Menai Bridge, Tal-y-bont, Llandegfan, Bethel, Llandygai, Abergwyngregyn, Tregarth, Beaumaris, Bethesda, Llanllechid, Port Penryn, Caernarfon, Llanberis, and in these postcodes BT19 1AY, BT19 1QD, BT19 1PY, BT19, BT19 1RU, BT19 1QG, BT19 1EL, BT19 1QJ, BT19 1FU, BT19 1DU. Locally based Bangor floor screeders will likely have the postcode BT19 and the telephone dialling code 028. Checking this out can guarantee that you are accessing local screeding. Bangor householders will be able to benefit from these and countless other related services.
Latex Screeds Bangor
It may be an advantage to use a latex screed when a certain amount of flexibility is required in the surface of a floor. Latex screeds come in two parts - a bottle and a bag - with a bottle that contains liquid latex, and a bag that contains a cement powder. Latex screeds are more flexible and quicker drying than other types of screed, since the water which is normally used is exchanged for the latex liquid.
Before the installation of the final decorative covering, this latex compound is used for levelling-out subfloors. Appropriate for sub-floors of asphalt, quarry tiles, wood, sand/cement and concrete, this screed gives the ideal surface for the application of adhesives which is also resilient and smooth. This type of screed will produce a flexible, crack-free finish, even if there is a bit of movement in your sub-floor.
When a screed is being laid on top of a membrane of either acoustic or thermal insulation (i.e. a "floating" screed), latex floor screeds aren't suitable, because in this instance (normally when screeding on top of underfloor heating), you'll likely need a thickness of 50mm-75mm.
There are a wide range of tasks that can be conducted by your local Bangor floor screeder including industrial floor screeding, screed flooring, shop floor screeding in Bangor, garage screeding, self-levelling floor screeding, rapid strength floor screeds, screed reinforcement Bangor, polished screed flooring, fibre reinforced floor screeding, floating screed Bangor, conservatory screeding, external screeding, sand and cement screeds, residential floor screeding, bonded concrete floor screeding in Bangor, bonded screed, waterproof floor screeding, unbonded screed, screed repairs, floor screeding, floor noise reduction, concrete pumping, latex screed, quick-dry screeds Bangor, structural screeds, anhydrite screed, concrete screed, damp proof membranes, and lots more floor screeding tasks. These are just a handful of the activities that are conducted by those installing screeding. Bangor specialists will be happy to inform you of their full range of floor screeding services.
Skip Hire Bangor
With the majority of home refurbishments or property makeovers in Bangor, quite a lot of waste will be generated, and you'll want to make allowances for this in the planning phase. Whether or not lots of waste is created by your floor screeding will depend on the particulars of your specific project, sometimes there'll be lots of waste, sometimes not much at all. Depending on who you employ to do the task, some floor screeders will include waste removal within the job quote and will be glad to get rid of it for you.
Whether you are left with doing this yourself, or the tradesman is dealing with it, a skip will usually be required. Skips are available in all sizes and shapes, so there is bound to be one out there to suit your exact needs. For smaller projects you can choose skip bags and mini-skips, for larger home renovations and landscaping work there are midi-skips and builders skips, and for commercial use or really massive projects, roll-on roll-off skips are the preferred alternative.
If you would like to find out how much it costs to hire a skip in Bangor GO HERE.
Floor Screeding Near Bangor
Also here.: Caernarfon floor screeding, Anglesey floor screeding, Llanllechid floor screeding, Llanfairfechan floor screeding, Llanberis floor screeding, Bethesda floor screeding, Abergwyngregyn floor screeding, Llandygai floor screeding, Beaumaris floor screeding, Tregarth floor screeding, Menai Bridge floor screeding, Llandegfan floor screeding, Tal-y-bont floor screeding, Port Penryn floor screeding, Bethel and more. Most of these villages and towns are served by companies who do floor screeding. Bangor property owners can get floor screeding price quotes by clicking
- Bangor Cheap Floor Screeding
- Bangor Floor Levelling
- Bangor Floor Damp Proofing
- Bangor Underfloor Heating Installations
- Bangor Fast-Dry Floor Screeding
- Bangor Floor Screeding
- Bangor Floor Screeding Advice
- Bangor Screed Calculator Service
- Bangor Domestic Floor Screeding
- Bangor Commercial Screeding
- Bangor Polished Screed Floors
- Bangor Screeding Services
- Bangor Floor Insulation
- Bangor Fibre Reinforced Floor Screeding
Screeding Around Bangor: In the last year screeded floors had been installed in these Bangor streets: Seacourt Garden, Silverstream Avenue, Hannays Hill, Jubilee Drive, Ballyminetragh Gardens, Irvine Park, Killeen Park, Ballymacormick Avenue, Glenaan Court, Bloomfield Retail Park, Stratford Drive, Hanover Hill, Lord Warden's Drive, Carlton Park, Bel-Air Avenue, The Elms, Lord Warden's Road, Castle Cottages, Bryansglen Avenue, Sherwood Gardens, Regency Park, Lisnabreen Crescent, Cairnsville Road, Hazelview, Dam Road, Orlock Gardens, Fernmore Avenue, Skipperstone Gardens, Cloverhill Glen, Sinclair Road, and in these Northern Ireland postcodes: BT19 1AY, BT19 1QD, BT19 1PY, BT19, BT19 1RU, BT19 1QG, BT19 1EL, BT19 1QJ, BT19 1FU, BT19 1DU. Work was completed in these locations by specialists in floor screeding. Bangor property owners were given reliable and professional floor screeding services on every occasion.
If you're interested in local info regarding Bangor, Northern Ireland go here
Floor screeding in BT19 area, phone code 028.