Floor Screeding Hove East Sussex (BN3): If you are looking to install underfloor heating, have an uneven or damaged floor or are renovating a property or basement in your Hove property, it is the perfect time to think about contacting a professional floor screeding company. A screed is used to generate a smooth floor surface over a rough concrete sub-base and provide a solid foundation for your choice of top flooring material. Floor screeding can provide a durable, quality floor surface for almost any room.
FLOOR SCREEDING EXPERTS HOVE
It does not matter how small or large the area is that you require to be levelled, a trustworthy screeding company in Hove will have the necessary equipment, skills and knowledge to give you an outstanding level of service. They'll be ready to advise you about the right type of screed your project requires, and how best to apply and install it.
A professional screeding specialist will also notify you if a structural engineer is necessary for your project, to check on point loadings, load bearing and flex strength that your screed floor might require to conform with British Standards and building regulations.
Skilled and qualified tradesmen are necessary for a successful outcome and will extend the life of your floor by using the right sort of screed for your room's intended purpose. Choosing the right screeding materials and the method of installation is vital if you want a durable and quality finish for your floor.
There are many screeding contractors in the Hove area so if possible get multiple price quotes for your floor screeding project before picking a company and know to what standard of finish it's for. For domestic properties a quotation will usually be provided for an SR (Surface Regularity) calculation of SR1 or SR2. SR2 and SR3 may be less costly options, although the floor screeding finish might have errors and deviations, whilst SR1 guarantees a pretty much perfect finish. This could mean that you might have to correct any patches that may cause issues when putting down your finished flooring solution.
All Hove screeding companies must adhere to British Standards (BS8204) and ought to have some form of accreditation from the manufacturers of screeding equipment and materials, e.g. Cemfloor, Gypsol, Flowcrete. A contractor holding such accreditations proves they have been assessed and trained in using these products and can provide a high standard of service in all aspects of their installation.
Commercial screeders in Hove will generally undertake larger floor screeding projects in hospitals, schools, pubs, factories, warehouses and shops.
TYPES OF SCREED
Standard Screeds - Widely used in residential projects where the blend of sand and cement is perfectly acceptable for regular footfall usage. 5 parts sand to 1 part cement is the normal mix for standard screeds. This 5 to 1 ratio standard flooring screed will set hard at a rate of one millimetre per day after application.
Fast Drying and Advanced Drying Screeds - If you have to press ahead urgently with the flooring owing to time limitations, this screed dries more speedily than standard flooring screeds. The vast majority of the fast drying screeds are fibre reinforced and are ideal for a wide array of flooring projects where the quicker drying rate of three to seven millimetres is advantageous.
Self-Levelling or Liquid Screeds - When the highest possible standard of finish is necessary this solution of latex and cement is employed to produce SR1 quality screeding. This self-levelling compound provides a smooth and clean surface over a damaged floor or rough substrate to allow all sorts of flooring materials to be laid. The liquid screed can be poured to a thickness of only one millimetre, but will still provide a high strength surface for a wide range of flooring materials.
Industrial and Heavy Duty Screed - Made for maximum strength and durability on floors where traffic is high or heavy loading on the floor is needed.
Polymer Screeds - An extremely high strength solution where a reduced thickness is necessary. The setting times vary according to proprietary product guidelines.
Fibre Reinforced Screed - The preferred option where underfloor heating is being installed in residential homes in Hove. This is due to the improved durability and protection against thermal shrinkage and cracking offered by the fibres within the screed mix. It dries at an identical rate to a standard screed, at about one millimetre per day.
SCREEDING PREPARATION AND INSTALLATION
Good preparation is vital for a quality finished screed surface that will be durable and hard wearing. Any paint, grease, debris and oil on the original floor surface can adversely affect the adhesion of the screed, and should be eliminated.
Any cleaning products used during this stage should leave no residues, and the floor surface must be allowed to dry by itself naturally. It is essential to fix any crevices or cracks in the base to avoid them being mirrored and "travelling" upwards into the freshly screeded floor. A trustworthy Hove screeding company will address these issues during a site survey and make certain that all preparations are completed before moving on to the next stages of the floor screeding process.
To shield the flooring materials and screeding layer from dampness rising up from the ground, a DPM (damp proof membrane) will have to be laid. Different thicknesses of polythene sheets might be used as a damp proof membrane and also act as a buffer for the screed and any insulation panels.
If your home is located in a place where radon gas is present an additional barrier layer is required to prevent radon gas from getting through. A simple air-tight membrane might be sufficient in areas with relatively low levels of radon, however in more severe cases there may need to be a more complicated extraction system to block any ground penetrating radon.
As soon as the base has been properly prepared and all DPMs installed, a sealant or primer is then applied. A primer assists in the screed to bond to the base and membranes and different varieties exist based upon which screed type is being used. These products require professional tradesmen to apply them in the right ratios by using bespoke equipment, such as airless sprays.
Now is the time that underfloor heating can be laid out in the correct manner and installed. The under floor heating system is laid out in the correct pattern and secured firmly to insulation panels to stop any movement during screed application. Under floor heating is one of the most effective ways to heat a room and an expertly installed system should deliver even warmth in all areas of the floor.
The screed can now be mixed and prepared on site and spread onto the floor base. Your screeding specialist will have given you advice on which screed type is appropriate for your needs, in line with your intended use of the room area. Be aware that even advanced and quick drying screeds have a minimum of twenty four hours before you're able to walk over any screeded surfaces and at least three days before any floor coverings can be fitted. If you are aiming to end up with a well finished and durable floor surface you must follow the manufacturer's guidelines with regards to standard and heavy duty screeds where the time period will be longer.
You can assess the SR level of the finished screed as soon as it's solidified enough for walking on. Through the use of a 2 metre straight-edge the floor surface is checked for any deviations, ridges and dips in the surface of the screed.
- SR1 - SR1 is the highest standard and permits only 3mm of deviation from the straight-edge.
- SR2 - The normal standard flooring in commercial and industrial builds is normally SR2 and has a maximum deviation of 5 millimetres across the whole screeded surface.
- SR3 - SR3 is utility standard where a perfect finish isn't needed. This classification allows for a maximium deviation of 10 millimetres.
If you need to check the floor for load bearing, a structural engineer is required to conduct the testing. The testing will make sure that your new screeding is viable for the load bearing requirements laid out in the site survey. The screed could be given a "drop hammer test" to determine strength and flexibility in various areas. Any screed flooring that's got point load requirements must be approved by a competent structural engineer following the BS8204 regulations. (Tags: Floor Screed Hove, Floor Screeding Services Hove, Screeding Hove, Floor Screeding Hove).
There is a range of work that can be conducted by your local Hove floor screeding specialist including acoustic flooring, fibre reinforced screeding, underfloor heating installations, floor levelling Hove, floor insulation Hove, quick-dry screeds, liquid screeds, floor renovation Hove, floor screed testing in Hove, bonded concrete floor screeding, damp proof membranes Hove, residential floor screeding, polished floor screeding Hove, screeding repairs, waterproof floor screeding, floor screeding advice, concrete pumping, self-levelling screeding, and lots more floor screeding tasks.
Floor Screeding Tools
- Dappling Bar
- Straight Edge
- Heavy Duty Spirit Level
- Knee Protectors
- Tape Measure
- Floor Profiler
Floor Screeding Near Hove
Also: Stanmer floor screeding, Aldrington floor screeding, Mile Oak floor screeding, West Hove floor screeding, Small Dole floor screeding, Cliveden Close floor screeding, Poynings floor screeding, Fishergate floor screeding, Upper Beeding floor screeding, Fulking floor screeding, Falmer floor screeding, Patcham floor screeding, Hangleton floor screeding, Denmark Villas floor screeding, Pyecombe floor screeding and more.
- Hove Cheap Screeding
- Hove Fast-Dry Screeding
- Hove Screeding Services
- Hove Fibre Reinforced Screeding
- Hove Floor Levelling
- Hove Floor Damp Proofing
- Hove Residential Floor Screeding
- Hove Floor Screeding Advice
- Hove Indistrial Screeding
- Hove Liquid Screeds
- Hove Underfloor Heating Installations
- Hove Floor Insulation
- Hove Screed Calculator Service
- Hove Polished Screed Floors
More Brighton, Newhaven, Hove, Hastings, Hailsham, Ringmer, Polegate, Uckfield, Westham, Rye, Seaford, Forest Row, Wadhurst, Peacehaven, Willingdon, Heathfield, Eastbourne, Crowborough, Ore, Bexhill-on-Sea, Lewes, Battle.:
To find out local Hove information go here
Floor screeding in BN3 area, 01273.
Floor Screeding Hove - Commercial Screeding Hove - Quick-Dry Screeding Hove - Residential Screeding Hove - BN3 - Screeding Services Hove - Screeding Hove - Floor Levelling Hove - Screeder Hove