Floor Screeding Montrose

Montrose Screeding & Floor Levelling Services

Floor Screeding Montrose Scotland (DD10): If you have a damaged or uneven floor, are renovating a property or cellar or are aiming to install under floor heating in your Montrose home, then it is time to consider bringing in a professional floor screeder. A screed is used to generate a smooth floor surface over a concrete sub-base and provide a firm foundation for you final flooring material. The screeding is an important process to guarantee a durable and quality finish to the entire floor structure.

Free Montrose Floor Screeding Quotes


A reliable floor screeding contractor in Montrose will have all the experience and knowledge to help you achieve a perfectly finished floor in whatever shape or size of room you are working on. They'll assess the project and figure out the appropriate type of screed you require and how best to apply it.

Floor Screeding Montrose Scotland (DD10)

It may be a requirement, contingent on the intended use of the area, for a structural engineering survey to abide by building regulations on flex strength, point loadings and load requirements of the screed floor.

Working with a highly trained and qualified contractor will guarantee you get the correct kind of screed for the room's intended usage to extend the lifespan of your floor. The correct blend of screed and the techniques used in laying it are also crucial to guarantee the ultimate intergrity of your floor surface.

Before selecting a floor screeding specialist from those operating in the Montrose area, ask to what standard of finish they are basing their quote, and also make certain you get multiple quotations. For domestic properties an estimate will normally be provided for an SR (Surface Regularity) standard of SR1 or SR2. Each of the 3 SR levels offer different qualities of finish, with SR1 being the highest quality, with the lowest amount of deviation over the surface area. Any errors or imperfections in the screeding can cause problems in laying flooring owing to flat spots, ridges, indentations in the surface.

Floor Screeders Montrose (01674)

The regulations and guidelines specified in the British Standards BS8204 must be observed by all Montrose floor screeding contractors and they must also hold accreditation with the manufacturers of any specialist screeding materials (Cemfloor, Flowcrete, Gypsol etc.) to verify their safe working practices and competence. A contractor holding such accreditations proves they've been assessed and trained in the use of these screeding products and can offer a high quality standard in all aspects of their installation.

Montrose commercial screeders may be involved in floor screeding in shops, boutiques, hospitals, schools, factories and warehouses.


Standard Screeds - This is acceptable for basic domestic use and comprises a mixture of cement and sand. This mix comprises a 5 to 1 ratio of sand to cement. This five to one ratio standard screed will dry out at a rate of 1mm per day after laying.

Fibre Reinforced Screed - The professional's choice for domestic use on top of underfloor heating. The fibres in this screed mix enhance overall strength and durability while also protecting against thermal cracking and shrinkage. The screed will set hard at a rate of roughly 1mm/day.

Industrial and Heavy Duty Screed - A screed designed for high load and heavy traffic areas where maximum strength and durability is necessary.

Fast Drying and Advanced Drying Screeds - As the name would suggest, these screeds dry at a quicker rate and allow you to use the screeded area much faster. Drying out at a rate of three to seven millimetres, determined by the mix, they're typically a fibre reinforced type of screed and are ideal for projects that have tight deadlines.

Screeding Quotes Montrose Scotland

Liquid or Self-Levelling Screeds - A cement and latex mixture which can achieve the highest standard of finish to SR1 levels. Typically used to finalise a poor substrate level or damaged floor so as to lay a brand new flooring surface, like tiles on the top of it. Even with a depth of 1mm, the latex polymers within the mixture provide a high strength screed for a wide variety of uses.

Polymer Screeds - When a lower thickness of floor is necessary because of construction factors, a polymer screed offers an extremely high strength resolution to the situation. Maker's guidelines for drying times differ across the various product ranges.


To make certain the screeding is of a good quality finish that's durable and hard wearing, time should be devoted to fully preparing the area before any screed is poured. It's vital that all contaminants such as grease, paint, oil or loose debris is eliminated from the floor before laying any screed, as these can affect the adhesion capability that a good quality floor screed needs.

Screeding Near Montrose (DD10)

If any products are used during this stage it is vital to make certain that no residues of detergents, soaps or other cleaning products are left on the floor surface and it is allowed to dry out naturally. If screeding over a cement or stone floor then all cracks should be mended to stop them from "travelling" up through the screed layer and causing deviations on the final floor surface. A skilled Montrose screeding company will take note of these problems during a site survey and make certain that all preparations are finished before applying the next steps in the floor screeding process.

A damp proof membrane (DPM) will be put down once the preparation work has been finished to stop ground moisture affecting the screeding and floor materials. Different thicknesses of specialised polythene might be used as a damp proof membrane and also act as a barrier for the screed and any insulation panels.

Another air-tight barrier could be needed if your home is in an area that's known to be susceptible to radon gas. If radon occurs in large amounts then a complete ventilation system might be needed under the layer of screed which will extract any gases that might seep in from the ground.

The final step of the surface preparation process is the painting or spraying of a primer or sealer. These primers and sealers will make certain the screed bonds perfectly to the base surface and help to accomplish a high quality finished floor. These products need certified technicians to apply them in the right ratios by using airless sprays and other bespoke equipment.

Underfloor heating can now be installed and tested before the screed is applied. Insulation panels can be laid out and the heating pipes and cabling will be securely mounted so that there is no movement while the screed is being applied. Warmth is spread evenly across the floor in a professionally fitted underfloor heating system, and in conjunction with it being an efficient choice of heating, it's an excellent choice for the majority of Montrose home restoration projects.

Floor Screed Montrose (01674)

The screeding can now be prepared in situ and poured onto the floor base. The particular requirements of the room will determine the kind of screeding that's used. Bear in mind that even advanced and quick drying screeds have a minimum of 24 hours before you're able to walk on any screeded surface and at least seventy two hours before any flooring can be applied. If you're hoping to end up with a nicely finished and hard-wearing floor surface you must follow the manufacturer's guidelines with regard to standard and heavy duty screeds where the timescale will be longer.

The SR standard of your screed can be ascertained once it's solidified sufficiently to be stepped onto. The test involves using a two metre straight edge laid down upon the surface and any variations from true are measured.

  • SR1 - Over the entire screed area, if there aren't any deviations greater than three millimetres from the straight-edge, you've got a top quality SR1 level surface.
  • SR2 - If the floor deviates from the straight edge by 5mm or less it is SR2 level and is the standard for industrial and commercial floors.
  • SR3 - For other floors where the finish is fairly immaterial SR3 is the standard and should have a maximum deviation measurement of 10 millimetres or less.

If your screeding has been laid with particular loading in mind then a qualified structural engineer will be required to perform the assessment. The assessment will make certain that your newly laid screed surface is suitable for the load bearing requirements set down in the site survey. The screed could be given a "drop hammer test" to measure flexibility and strength at distinct points. The specialist measurement and testing tools needed mean this can only be carried out by a qualified structural engineer observing the BS8204 guidelines. (Tags: Floor Screeding Montrose, Screeding Montrose, Floor Screeding Services Montrose, Floor Screed Montrose).

Floor screeding services are available in Montrose and also in nearby places like: Friockheim, Tayock, Kinnaber, Inverkeilor, Johnshaven, Gourdon, Lochside, Scurdie Ness, Inchbraoch, Laurencekirk, Ferryden, Brechin, Dun, St Cyrus, and in these postcodes DD10 8NE, DD10 8EJ, DD10 8ND, DD10 8QY, DD10 8AN, DD10 8BL, DD10 8HD, DD10 8NZ, DD10 8PY, DD10 8DS. Locally based Montrose floor screeders will most likely have the telephone code 01674 and the postcode DD10. Checking this out can ensure you access locally based floor screeding. Montrose property owners can benefit from these and countless other comparable services.

Book a Screeder in Montrose UK

Latex Screeding Montrose

It may be an advantage to use a latex self-levelling screed when a certain degree of flexibility is necessary in the surface of a floor. Latex screeds normally comprise two parts - a cementitious powder and a latex liquid component. Latex screeds are quicker drying and more flexible than other types of screed, since the water which is normally used is substituted for the latex liquid.

This latex compound is used for levelling subfloors in advance of the installation of the final decorative covering. This screeding is suitable for sub-floors made from sand/cement, asphalt, quarry tiles, wood or concrete, is perfect for the application of adhesives and gives a smooth and resilient surface. Even where there is movement on your sub-floor, this latex screed will provide a flexible, crack-free finish.

When a screed is being laid on the top of a layer of either thermal or acoustic insulation (i.e. a "floating" screed), latex flooring screeds aren't appropriate, because in this instance (typically when screeding on top of underfloor heating), you'll probably require a screed thickness of 50-75mm.

Related Tasks

Screeding Related Tasks Montrose

There is a range of work that can be carried out by your local Montrose floor screeding specialist including lightweight screeding, self-levelling screeding in Montrose, sand floor screed in Montrose, shop screeding, warehouse floor screeding Montrose, structural screeds in Montrose, floor screeding tools Montrose, fast-dry floor screeds Montrose, unbonded screed, liquid screeds, residential screeding, flow screeding, screed reinforcement, substrate floor preparation, underfloor heating screeds in Montrose, floor preparation Montrose, final floor finishes, floor levelling in Montrose, screed testing in Montrose, concrete screeding, polished screed floors in Montrose, anhydrite floor screed in Montrose, underfloor heating installations, rapid strength screeding, floating screed Montrose, floor repairs, floor screeding quotes, bonded concrete screeding, and more floor screeding tasks. These are just a handful of the activities that are carried out by people specialising in floor screeding. Montrose providers will let you know their full range of services.

Skip Hire Montrose

Skip Hire Montrose

With the majority of property makeovers or home refurbishments in Montrose, a substantial amount of waste will be generated, and therefore you'll want to make provision for this in the planning phase. For your floor screeding, varying levels of waste will be created, depending on your particular circumstances, and the scope and scale of your project. Although some screeding contractors will be glad to take away any waste materials, many will leave it for you to deal with.

Whether you're left with doing this yourself, or the tradesperson is dealing with it, a skip will sometimes be required. Skips come in all sizes and shapes, so there is certain to be one out there to match your exact needs. Generally speaking mini-skips can take roughly 2-3 yds of waste, midi-skips can take roughly 4-5 yds of waste, builders skips can take roughly 6-8 yds of waste and roll-on-roll-off skips can take roughly 20-25 yds of waste. Skip bags normally take approximately 1-1.5 yds of waste.

To book your skip hire in Montrose GO HERE.

Floor Screeding Tools

  • Floor Profile
  • Heavy Duty Spirit Level
  • Trowel
  • Knee Protection
  • Straight Edge
  • Humidity Tester
  • Shovel
  • Gloves
  • Tape Measure
  • Wheelbarrow
  • Float

Floor Screeding Near Montrose

Also find: Kinnaber floor screeding, Tayock floor screeding, St Cyrus floor screeding, Johnshaven floor screeding, Laurencekirk floor screeding, Brechin floor screeding, Scurdie Ness floor screeding, Gourdon floor screeding, Inverkeilor floor screeding, Friockheim floor screeding, Dun floor screeding, Inchbraoch floor screeding, Ferryden floor screeding, Lochside screeding services and more. All these villages and towns are served by companies who do floor screeding. Montrose homeowners can get estimates by going here.

Floor Screeding Services Montrose

Find Floor Screeding in Montrose Here
Screeding Services in Montrose Scotland (01674)
  • Montrose Fast-Dry Screeding
  • Montrose Liquid Screeds
  • Montrose Underfloor Heating Installations
  • Montrose Domestic Floor Screeding
  • Montrose Screeding Services
  • Montrose Floor Insulation
  • Montrose Floor Levelling
  • Montrose Floor Screeding Advice
  • Montrose Floor Damp Proofing
  • Montrose Screed Calculator Service
  • Montrose Fibre Reinforced Floor Screeding
  • Montrose Indistrial Floor Screeding
  • Montrose Floor Screeding
  • Montrose Polished Screed Floors

Screeding Around Montrose: In the last twelve months screeded floors were professionally installed in the following Montrose streets: Castle Street, Barns Of Craig House, Dorward Road, Wellington Close, Kinnaber, Angus Drive, Dunchavin, High Street, Hill Place, Muirside Steading, House Of Dun, Upper Fullerton House, West Mains Of Rosemount, Bailie Norrie Crescent, Woodside Of Hedderwick, Garrison Road, Meridian Street, Usan Lodge, Lower Northwaterbridge, Langley Park House, Panter Crescent, Woodside Of Dun, York Place, Redfield Crescent, Graham Crescent, Traill Drive, Balgove Steading, and in these Scotland postcodes: DD10 8NE, DD10 8EJ, DD10 8ND, DD10 8QY, DD10 8AN, DD10 8BL, DD10 8HD, DD10 8NZ, DD10 8PY, DD10 8DS. Work was performed in these places by experts in screeding. Montrose business and home owners enjoyed reliable and top notch screeding services on each occasion.

Montrose Screeding Jobs: View screeding jobs in Montrose by clicking here: Montrose Screeding Jobs

To get local information relating to Montrose, Scotland look here

Floor screeding in DD10 area, telephone code 01674.

TOP - Floor Screeding Montrose

Floor Screeders Montrose - Floor Levelling Montrose - Screeding Quotes Montrose - DD10 - Residential Screeding Montrose - Commercial Screeding Montrose - Screeder Montrose - Fast-Dry Screeding Montrose - Floor Screeding Montrose


(This screeding Montrose page was compiled by Steve Locke 30-06-2022)