Floor Screeding Tooting

Tooting Screeding & Floor Levelling Services

Floor Screeding Tooting Greater London (SW17): If you are looking to install underfloor heating, are restoring a property or basement or have an uneven or damaged floor, then making contact with a professional floor screeding company in Tooting is the best solution. Enabling you to lay your final layer of flooring material, (boards, carpets, tiles etc) over the top of it, floor screeding provides a smooth, level finish to a coarse sub-base floor. Floor screeding can provide a high quality and durable finish for almost any room.

Free Tooting Floor Screeding Quotes


It matters not how small or large the room you require to be levelled, a certified screeding firm in Tooting will have the essential equipment, skills and knowledge to provide you with an excellent level of service. They will be able to advise you about the correct kind of screed your project requires, and the best methods for applying and installing it.

Floor Screeding Tooting Greater London (SW17)

A professional screeding company will also notify you if a structural engineer is needed for your project, to evaluate point loadings, load requirements and flex strength that your flooring might require to conform with British Standards and building regulations.

Skilled and qualified tradespeople are necessary for a successful outcome and will extend the lifespan of your floor by making use of the right form of screed for the proposed purpose of your room. Picking the right screeding materials and the method of installation is vital if you want a quality and durable finish for your floor surface.

There are many screeding specialists in and around Tooting so try to get multiple quotations for your project before selecting a company and know to what standard of finish it's for. For domestic properties an estimate will normally be given for a Surface Regularity (SR) calculation of SR1 or SR2. Each of the 3 SR levels deliver different qualities of finish, with SR1 being the highest quality, with the smallest amount of deviation over the surface area. An SR2 or SR3 level could mean there will be flat spots or ridges that could cause problems when installing your final floor surface.

Floor Screeders Tooting (020)

The regulations specified in the British Standards BS8204 must be observed by all Tooting floor screeding contractors and they should also be approved by the manufacturers of specialist screeding materials (Cemfloor, Gypsol, Flowcrete etc.) to demonstrate their safe working practices and competence. A company holding accreditations proves that they've been trained and assessed in the use of these screeding products and can offer a high quality standard in all areas of their installation.

Commercial screeders in Tooting will usually undertake screeding projects in shopping centres, warehouses, factories, hospitals, schools and hotels.


Standard Screeds - Widely used in residential projects where the mixture of sand and cement is ideal for basic footfall use. The ratios involved in standard screeds are five parts sand to one part cement. After laying a standard flooring screed sets at a rate of just 1mm/day.

Industrial and Heavy Duty Screed - Where traffic levels are expected to be high or heavy loading on the floor is needed, heavy duty screeds offer maximum strength and durability.

Liquid or Self-Levelling Screeds - Used to provide the highest quality of finish, especially in SR1 levels of screeding, by a latex and cement formula. This self-levelling compound provides a clean and smooth surface over a damaged floor or rough substrate to enable all sorts of flooring materials to be laid. Even with a depth of 1mm, the latex polymers within the mixture provide a high strength screed for a variety of uses.

Screeding Quotes Tooting Greater London

Fibre Reinforced Screed - The first choice where underfloor heating is being installed in residential homes in Tooting. The special fibres in this screed enhance overall durability and strength while also protecting against thermal shrinkage and cracking. It's got a setting rate of 1mm per day.

Polymer Screeds - These provide a high level of strength with a lower thickness. On account of their different chemical compositions, these polymer screeds have varying setting times which you can verify by viewing manufacturer's own product guidelines.

Fast Drying and Advanced Drying Screeds - As the name suggest, this screed dries rapidly and allows you to use the floor area much sooner. These are typically a fibre reinforced screed which can dry out at a rate of between 3-7mm per day and are employed in time dependent projects.


Screeding installers will need to prepare the area before any other work so as to ensure a high quality and hard wearing screed flooring. Any oil, paint, grease and debris on the existing floor level can adversely affect the bonding of the screed, and should be removed.

Screeding Near Tooting (SW17)

If cleansing products were used it's vital to remove any residues of detergent, soap etc, and allow the floor surface to dry naturally. It is necessary to repair any cracks or crevices in the surface to avoid them being mirrored and "travelling" upwards into your freshly screeded floor. An on-site survey will allow the screeding installer to pinpoint this preparation work and tackle it before commencing to pour the screeding.

A damp proof membrane (DPM) will be applied after the preparation work has been concluded to prevent ground dampness getting into the screeding and floor materials. There may be 2 or 3 layers of varying thicknesses of polythene to act as barriers between the insulation layer and screed.

A further air-tight barrier could be required if your building is in a location that's regarded as prone to radon gas emissions. A simple air-tight membrane may be suitable in locations with low emissions of radon, but in more serious situations there may have to be a more complex extraction system to take away any harmful radon gas.

As soon as these stages have been completed the screeding company will put on a sealer or primer to the prepared floor base. A primer assists in the screed bonding correctly to the base surface and different types exist based on which type of screed is being applied. These products require skilled tradesmen to apply them in the appropriate ratios by using tailor-made equipment, such as airless sprays.

Before the screeding can be poured, any underfloor heating (if required) will now be laid out. The underfloor heating system will be carefully positioned and mounted firmly on insulation panels to prevent any movement during screed application. Underfloor heating is one of the most effective ways to heat a room and a professionally installed system should give an even level of warmth in all areas of the floor.

Floor Screed Tooting (020)

The screeding can now be mixed and prepared on site and spread onto the floor base. The specific requirements of the room will dictate the kind of screeding used. For quick drying and advanced screeds there'll be at least 24 hours delay before it can be walked on, and a further 72 hours minimum before you are able to install any flooring materials. If you're aiming to wind up with a well finished and long-lasting floor surface you should follow the manufacturer's guidelines with regard to standard and heavy duty screeds where this time period will be longer.

Once the screeding has solidified it can be quality checked to determine the SR level. The basic SR test uses a 2 mtr long straight-edge to check for any variations in the floor surface.

  • SR1 - Over the whole floor area, if there aren't any disparities greater than three millimetres from the straight-edge, then you have a top specification SR1 standard surface.
  • SR2 - SR2 is for standard industrial and commercial floors and can deviate from the straight-edge by as much as five millimetres.
  • SR3 - For other floors where the finish is fairly unimportant SR3 is the standard and should have a maximum deviation measurement of 10 millimetres or less.

If your screed has been installed with specific loading in mind then a qualified structural engineer is going to be necessary to conduct the assessment. The testing will ensure your newly laid screeded surface is viable for the load bearing requirements specified in the site survey. This will include what's known as a drop hammer test which records specific data on the flexibility and strength of the screed. The precise measurement and testing tools involved mean that this can only be performed by a fully qualified structural engineer respecting the guidelines of BS8204. (Tags: Floor Screeding Tooting, Floor Screeding Services Tooting, Floor Screed Tooting, Screeding Tooting).

Floor screeding services are available in Tooting and also in nearby places like: Merton Park, Furzedown, Streatham Hill, Morden, Grosvenor Way, South Wimbledon, Tooting Bec, Merton, Balham, Streatham Vale, and in these postcodes SW17 7AY, SW17 0QL, SW17 8DH, SW17 0UR, SW17 8LR, SW17 8SS, SW17 0SR, SW17 7EY, SW17 0SQ, SW17 0RR. Locally based Tooting floor screeders will probably have the telephone dialling code 020 and the postcode SW17. Checking this will guarantee that you're accessing locally based screeding. Tooting property owners can utilise these and lots of other similar services.

Book a Screeder in Tooting UK

Screed Floor Removal Tooting

The practice of removing screed from a surface involves extracting and eliminating the existing layer. When upgrading or refurbishing a a floor in Tooting, it is frequently essential. Achieving the successful breakdown and removal of the screed layer in the removal process requires the use of specialist equipment and techniques. Preparation of the surface for new flooring or other modifications becomes achievable through this. Ensuring efficiency and safety, professional contractors proficient in screed removal undertake the secure elimination of the old screed, providing a fresh start for the floor, whether for repairs, upgrades or design alterations. (22264 - Screed Floor Removal Tooting)

Related Tasks

Screeding Related Tasks Tooting

There is a range of work that can be conducted by your local Tooting floor screeder including garage floor screeding Tooting, floor levelling, resin floor screeds Tooting, screeding advice, unbonded screed Tooting, screed flooring in Tooting, granolithic screeding Tooting, bonded screed, floor screed testing, self-levelling floor screeding, underfloor insulation, substrate floor preparation, anhydrite floor screeding, liquid screeding, external screeding, smoothing compounds, waterproof screeding, screeding repairs Tooting, floor screeding tools, floor screeding estimates Tooting, fibre reinforced screeding, screeded kitchen floors, lightweight floor screeding Tooting, screed testing & surveys, cheap screeding, conservatory screeding, pumped screeds in Tooting, shop screeding Tooting, structural screeds, final floor finishes, thin bed floor screeding Tooting, floor noise dampening, concrete screeding Tooting, and more floor screeding tasks. Listed are just an example of the activities that are performed by those installing screeding. Tooting providers will tell you about their entire range of services.


Floor Screeding Near Tooting

Also find: Streatham Hill floor screeding, Grosvenor Way floor screeding, Furzedown floor screeding, Balham floor screeding, Streatham Vale floor screeding, Merton Park floor screeding, Morden floor screeding, Tooting Bec floor screeding, Merton floor screeding and more. There are firms who do screeding in all these locations. The skills and expertise required to provide top-notch flooring solutions are possessed by these competent professionals. They're well-versed in the art of screeding, making sure that the work is executed to the highest standards, whether it's for properties of a commercial or domestic nature. For local home and property owners seeking floor screeding services, it's a quick and easy process to obtain quotes and gather information. All you have to do is click here. So, why not get cracking with your floor screeding project right away!

Floor Screeding Services Tooting

Find Floor Screeding in Tooting Here
Screeding Services in Tooting Greater London (020)
  • Tooting Polished Screed Floors
  • Tooting Cheap Floor Screeding
  • Tooting Liquid Screeds
  • Tooting Bathroom Screeding
  • Tooting Floor Screeding
  • Tooting Fast-Dry Screeding
  • Tooting Floor Damp Proofing
  • Tooting Floor Levelling
  • Tooting Fibre Reinforced Screeding
  • Tooting Commercial Floor Screeding
  • Tooting Screed After Care
  • Tooting Domestic Floor Screeding
  • Tooting Underfloor Heating Installation
  • Tooting Floor Screeding Advice

If you would like to get local Tooting info click here

Floor screeding in SW17 area, and dialling code 020.

TOP - Floor Screeding Tooting

Screeding Estimates Tooting - Fast-Dry Screeding Tooting - Commercial Screeding Tooting - Residential Screeding Tooting - Screeding Tooting - Floor Screeding Tooting - Floor Screeding Companies Tooting - Floor Levelling Services Tooting - Floor Screeders Tooting


(This screeding Tooting content was generated on 21-02-2024)