Floor Screeding Neath

Neath Screeding & Floor Levelling Services

Floor Screeding Neath Wales (SA10): If you are restoring a property or basement, are looking to install under floor heating or have a damaged or uneven floor, then you'll be needing to find a specialist floor screeding contractor to help you. Enabling you to lay your final layer of flooring material, (tiles, boards, carpets etc) on top of it, screeding provides a smooth, level finish to a rough sub-base. If you want your floors to last a long time then floor screeding is the most important factor in any building or renovation project.

Free Neath Floor Screeding Quotes


It matters not how big or small the room is that you need levelling, a decent floor screeding company in Neath will have the necessary know-how, equipment and expertise to give you a superb level of service. They'll assess the project and figure out the appropriate kind of screed you require and the best strategy for applying it.

Floor Screeding Neath Wales (SA10)

Your screeding company will also notify you if a structural engineer is required for your project, in order to identify point loadings, flex strength and load requirements that your flooring might need to conform with British Standards and building regulations.

Working with a qualified and highly trained flooring specialist will ensure you use the correct kind of screed for the room's proposed purpose and get the optimum lifespan out of the resulting flooring. A correct blend of screed and the techniques used for laying it are also critical to ensure the ultimate quality of your floor.

Before choosing a screeding contractor from those operating in the Neath area, ask to what standard of finish they are basing their quotation, and also make sure that you get multiple quotations. The Surface Regularity (SR) finish is the figure to look for when reviewing a quotation from Neath floor screeding companies. Each of the 3 SR levels offer different standards of finish, with SR1 offering the highest quality, with the smallest amount of deviation over the surface area. This means that you may need to rectify any areas that may cause problems when laying your final flooring material.

Floor Screeders Neath (01639)

British Standards BS8204 sets down the regulations and guidelines that all Neath screeding installers are required to follow, and if applying specialist screeding solutions, (Flowcrete, Cemfloor, Gypsol etc), they must be accredited by the manufacturers as being trained and skilled in their use. A contractor holding accreditation shows that they've been assessed and trained in using these products and can offer a top notch service in all aspects of their installation.

For larger floor screeding projects in boutiques, warehouses, shops, factories, schools and hospitals, skilled commercial screeders in Neath will be required.


Standard Screeds - This is good for normal residential use and comprises a combination of sand and cement. This mixture uses a 5 to 1 ratio of sand to cement. This five to one ratio standard screed will set hard at a rate of one millimetre per day after application.

Screeding Quotes Neath Wales

Self-Levelling or Liquid Screeds - Used to provide a high quality finish, especially where SR1 levels are needed, by a cement and latex solution. The self-levelling compound provides a clean and smooth surface over a damaged floor or rough substrate to enable all flooring materials to be laid. Even with a thickness of one millimetre, the latex polymers within the mixture provide a high strength surface for a wide variety of uses.

Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading of the floor is required, heavy duty screeds provide maximum durability and strength.

Advanced Drying and Fast Drying Screeds - If there is a need to move forward urgently with the work because of time limitations, these screeds dry much quicker than standard flooring screeds. Drying out at a rate of three to seven millimetres, determined by the mixture, they're usually a fibre reinforced type of screed and are great for flooring projects which have tight deadlines.

Polymer Screeds - These provide an extremely high level of strength with a reduced thickness. Manufacturer's guidelines for setting times vary across the product ranges.

Fibre Reinforced Screed - The preferred choice by professional contractors for use in combination with under floor heating systems. The greater strength and flex offered by the fibres in the screed help protect the floor from cracking and shrinkage due to heat. It sets at an identical rate to a standard screed of 1mm per day.


Screeding installers will have to prepare the area prior to any other work so as to ensure a hard wearing and quality screed flooring. Any oil, paint, debris and grease on the original floor level can affect the bonding of the screed, and should be eliminated.

Screeding Near Neath (SA10)

Any cleaning products that are used in this stage should leave no residues, and the floor base must be allowed to dry by itself naturally. It's vital to mend any cracks or crevices in the surface to stop them being mirrored and "travelling" up into the newly screeded floor. A professional Neath screeding company will pick up on such issues during the on-site survey and ensure that all preparations are finished before pressing on with the next steps in the screeding process.

A damp proof membrane (DPM) will be applied once the preparation work has been completed to prevent ground dampness affecting the flooring materials and screed. There may be two or three layers of varying thicknesses of polythene to act as barriers between the screed and the insulation layer.

If your house is situated in an area where radon gas is present a supplementary barrier layer is required to prevent radon gas from getting through. If radon occurs in large amounts then a complete ventilation and extraction system may be installed under the screed which will extract any gases that are seeping in from the ground.

Once these steps have been taken the screeding company will put on a sealer or primer to the prepared base surface. These primers and sealers will guarantee the screed bonds successfully to the base surface and help accomplish a good quality finished floor. Custom-made equipment such as airless sprays are used to apply a sealant or primer, by professional screeding installers in Neath observing the manufacturer's guidelines.

If you are installing underfloor heating, this is the time that it will need to be laid out and installed. The underfloor heating system is laid out in the correct pattern and firmly mounted on insulation panels to avoid any movement in the course of the screed installation process. Under floor heating is one of the most efficient ways to heat a room and a skillfully installed system should produce even warmth in all areas of the floor.

Floor Screed Neath (01639)

If you are not fitting under floor heating the screed will now be mixed and prepared on site and poured. Your screeding specialist will have given you advice on which kind of screed is suitable for your requirements, in line with your proposed use of the room area. Don't forget that even quick drying and advanced screeds have a minimum of 24 hours before you can walk on any screeded surfaces and a minimum 72 hours before any flooring materials can be applied. Such timescales will be longer for heavy duty and standard screeds and the manufacture's guidelines should be followed to the letter to accomplish the optimal finish and longevity of the floor.

The SR standard of your screed can be verified once it's set sufficiently to be stepped onto. The standard SR test uses a 2 metre straight edge to check for any deviations in the floor surface.

  • SR1 - Over the entire screed area, if there aren't any disparities greater than 3 millimetres from the straight-edge, then you've got a top level SR1 standard surface.
  • SR2 - The standard flooring in commercial and industrial builds is classed as SR2 and has a maximum deviation of 5 millimetres across the entire screeded floor.
  • SR3 - For other floors where the quality of finish is relatively immaterial the SR3 is the classification and should have a maximum deviation measurement of 10mm or less.

If you require load bearing checks, a qualified structural engineer is necessary to carry out the tests. This assessment will establish the strength of the screed surface and its viability for the intended use. The screed should be subjected to what is known as a "drop hammer test" to assess flexibility and strength in various areas. Any screed floor that has load bearing requirements must be sanctioned by a fully qualified structural engineer following the BS8204 guidelines. (Tags: Floor Screeding Neath, Screeding Neath, Floor Screed Neath, Floor Screeding Services Neath).

Floor screeding is available in Neath and also in nearby places like: Clydach, Tonmawr, Ponthydyfen, Winch Wen, Skewen, Briton Ferry, Jersey Marine, Birchgrove, Cwmafan, Llansamlet, Bryncoch, Cimla, Tonna, Resolven, Glais, Cadoxton, Baglan, Llandarcy, Bryn, Crynant, Cilfrew, and in these postcodes SA10 6PX, SA10 7EE, SA10 7BH, SA10 6PT, SA10, SA10 7AG, SA10 7HA, SA10 7PN, SA10 7BE, and SA10 7FH. Local Neath floor screeders will most likely have the telephone code 01639 and the postcode SA10. Checking this out should guarantee you're accessing local screeding. Neath home and business owners are able to benefit from these and lots of other comparable services. If you would like to get a quotation for floor screeding services, this can easily be done by clicking on the "Quote" banner.

Book a Screeder in Neath UK

Latex Floor Screeds Neath

It is better to use a latex screed when a degree of flexibility is needed in the surface of a floor. Generally coming in 2 parts, latex screeds comprise a cement-based compound, and a liquid latex mixture. The latex liquid additive replaces the water that's used in normal screeds, making it more flexible and quicker drying.

Prior to the laying of the final decorative surface, this latex product is used for levelling sub-floors. This is suitable for substrate made of sand/cement, wood, stone tiles, asphalt or concrete, is perfect for the application of adhesives and gives a durable and smooth surface. If there happens to be any movement in the subfloor this type of latex screed will produce a flexible, crack-free finish on which to lay your chosen floor coverings.

With "floating" screeds, for example when a screed is being laid on top of a membrane of either thermal or acoustic insulation, latex floor screeds won't be appropriate. Floating screeds with a thickness of 50-65mm are typically used on top of underfloor heating.

Related Tasks

Screeding Related Tasks Neath

There are a whole host of tasks that can be carried out by your local Neath floor screeder including professional floor levelling services in Neath, floor screeding, commercial floor screeding, polished screed flooring in Neath, decorative floor screeding Neath, liquid screeding, cheap screeding, screeding price quotes Neath, floor screed testing, final floor finishes Neath, concrete pumping Neath, garage floor screeding in Neath, unbonded screed in Neath, lightweight floor screeding, coloured floor screeding Neath, bathroom floors, floor screed aftercare, domestic floor screeding, thin bed floor screeding Neath, fibre reinforced floor screeding, acoustic flooring solutions Neath, office floor screeding, floor resurfacing, floating screed, underfloor heating screed, floor noise reduction, concrete screeding, screed kitchen floors, sand and cement floor screeding, screed reinforcement, and lots more floor screeding tasks. Listed are just a few of the tasks that are accomplished by those specialising in floor screeding. Neath professionals will be happy to inform you of their entire range of services.


Floor Screeding Near Neath

Also find: Llansamlet floor screeding, Crynant floor screeding, Skewen floor screeding, Ponthydyfen floor screeding, Cilfrew floor screeding, Briton Ferry floor screeding, Glais floor screeding, Resolven floor screeding, Cadoxton floor screeding, Clydach floor screeding, Cwmafan floor screeding, Cimla floor screeding, Birchgrove floor screeding, Winch Wen floor screeding, Llandarcy floor screeding, Baglan floor screeding, Jersey Marine floor screeding, Tonmawr floor screeding, Bryn floor screeding, Tonna floor screeding, Bryncoch floor screeding and more. Screeding services are available in all these villages and towns. These experienced specialists, by virtue of their skills and expertise, are capable of delivering high-quality flooring solutions. They possess considerable skill in screeding, ensuring top-quality execution for both commercial and residential properties. To obtain quotations for screeding, local householders can simply click here.

Floor Screeding Services Neath

Find Floor Screeding in Neath Here
Screeding Services in Neath Wales (01639)
  • Neath Floor Levelling
  • Neath Cheap Floor Screeding
  • Neath Fibre Reinforced Floor Screeding
  • Neath Floor Damp Proofing
  • Neath Coloured Floor Screeding
  • Neath Floor Screeding
  • Neath Floor Screeding Advice
  • Neath Fast-Dry Screeding
  • Neath Screed Calculator Service
  • Neath Polished Screed Floors
  • Neath Liquid Screeds
  • Neath Screeding Services
  • Neath Floor Insulation
  • Neath Residential Floor Screeding

To get local Neath info go here

Floor screeding in SA10 area, 01639.

TOP - Floor Screeding Neath

Floor Levelling Neath - Floor Screeding Neath - Floor Screeders Neath - Floor Screeding Companies Neath - Screeding Quotes Neath - Fast-Dry Screeding Neath - Screeding Neath - Floor Screeder Neath - Screeding Services Neath


(This screeding Neath content was created on 22-05-2024)