Floor Screeding Silsden

Silsden Screeding & Floor Levelling Services

Floor Screeding Silsden West Yorkshire (BD20): If you have an uneven or damaged floor, are aiming to install underfloor heating or are renovating a property or basement, then you'll need to find a specialist floor screeding company to assist you. Enabling you to lay your final layer of flooring material, (boards, carpets, tiles etc) over the top of it, screeding provides a smooth, level finish to a coarse sub-base floor. Screeding a floor allows you to provide a durable, quality finish for any room in your home or office.

Free Silsden Floor Screeding Quotes


Supplying the experience and proper working practices to establish the perfect base for your flooring, a floor screeding company in Silsden can assist you no matter what size or shape of room or area you are remodeling. They'll be able to advise you about the right type of screed that your project requires, and how best to apply and install it.

Floor Screeding Silsden West Yorkshire (BD20)

The screeding specialist will also tell you if a structural engineer is required for your project, in order to evaluate any flex strength, point loadings and load bearing that your screed floor may require to conform with British Standards and building regulations.

The training and skills that a certified screeding contractor brings to your project should guarantee a high quality outcome and help to extend the lifetime of your floors. Selecting the correct screeding materials and the best installation technique is vital if you want to end up with a quality and durable finish for your floor.

Make certain you get at least two or three price quotes for your Silsden screeding project and also ask to what standard you are getting each quote. For domestic homes a quotation will usually be provided for a Surface Regularity (SR) calculation of SR1 or SR2. SR2 and SR3 could be cheaper options, but the finished floor surface could have deviations and errors, whilst SR1 guarantees a perfect finish. This means you might have to rectify any areas that could cause problems when laying your finished flooring material.

Floor Screeders Silsden (01535/01274)

British Standards BS8204 lays out the regulations and guidelines that all Silsden screeding installers must follow, and if applying specialist screeding solutions, (Flowcrete, Cemfloor, Gypsol etc), they should be certified by the manufacturers as being trained and skilled in their use. A contractor holding such accreditation indicates that they have been assessed and trained in using these products and can offer a high quality service in all aspects of their installation.

For larger floor screeding projects in shops, salons, schools, factories, hospitals and warehouses, dedicated Silsden commercial screeders will be required.


Standard Screeds - This is ideal for normal residential use and is a mixture of cement and sand. This mix comprises a 5 to 1 ratio of sand to cement. The standard flooring screed will dry at a rate of one millimetre thickness per day.

Industrial and Heavy Duty Screed - Where levels of traffic are high or heavy loading of the floor is necessary, heavy duty screeds offer maximum durability and strength.

Fibre Reinforced Screed - The professional's choice for domestic use over the top of under floor heating. The fibres in this screed enhance overall strength and durability while also protecting against thermal cracking and shrinkage. It has a drying rate of one millimetre per day.

Screeding Quotes Silsden West Yorkshire

Advanced Drying and Fast Drying Screeds - If you have to use the floor at the earliest opportunity a fast drying screed can be utilised. The vast majority of the fast drying screeds are fibre reinforced and are appropriate for a wide array of flooring projects where the swifter drying rate of 3-7mm/day is a big advantage.

Liquid or Self-Levelling Screeds - A cement and latex material which can produce the highest standard SR1 finish. This is mostly used to produce a high quality floor over a damaged or poor quality substrate and enables all types of flooring materials to be used. Even with a depth of only 1mm, the latex polymers within the mixture provide a high strength screed for a wide range of uses.

Polymer Screeds - These provide a high level of strength with a minimal thickness. The setting times vary as outlined by product guidelines.


To ensure the screeding is of a high quality finish that's durable and hard wearing, time should be spent on carefully preparing the area prior to any screeding material being poured. The original floor surface should be thoroughly cleaned to eliminate any paint, grease, debris and oil which might adversely affect the bond of the screeding.

Screeding Near Silsden (BD20)

If cleaning products were used it is vital to remove any traces of detergent, soap etc, and leave the surface to dry naturally. It is essential to mend any crevices or cracks in the base to stop them being mirrored and "travelling" upwards into your newly screeded floor. During an on-site survey the screeding specialist will notice what preparations are necessary before any actual screeding starts.

A DPM (damp proof membrane) will be applied once the preparation work has been done to stop ground dampness getting into the flooring materials and screeding. The DPM is made out of thick polythene and various layers could be used to act as a moisture barrier and air insulating layer for the screeding.

If your home is situated in a place where radon gas is present an extra barrier layer is needed to prevent radon gas from entering. A simple air-tight membrane might be enough in areas with low emissions of radon, but in more severe situations there may need to be a more complicated extraction system to take away any harmful radon gases.

As soon as these steps have been taken the screeding company will apply a sealer or primer to the prepared base. Primers help with the bonding process and are specialist applications according to the type of screed that's being used. Devices such as airless sprays can be used to apply a sealant or primer, by professional screeding installers in Silsden observing the manufacturer's guidelines and safety advice.

This is the time that underfloor heating can be installed and laid out in the correct manner. Insulation panels can be laid out and the cables and heating pipes will be securely mounted to prevent any movement whilst the screed is being poured. Underfloor heating is one of the most efficient ways to heat a room and a skillfully installed system will give an even warmth in all areas of the floor.

Floor Screed Silsden (01535/01274)

The screeding can now be prepared in situ and applied to the base. Your proposed use of the room will assist your screeding contractor on what kind of screed is perfect for your requirements. For advanced and quick drying screeds there will be at least a 24 hour delay before it can be walked on, and a further Three days minimum before any flooring material can be laid over it. If you're looking to wind up with a properly finished and long-lasting floor surface you should follow the manufacturer's guidelines with regards to heavy duty and standard screeds where this time period will be longer.

As soon as the screed has set it can be quality checked to confirm the SR standard. The basic SR test uses a two metre long straight-edge to check for any variations in the screeded surface.

  • SR1 - Over the whole screed area, if there aren't any deviations greater than 3mm from the straight-edge, then you have a top quality SR1 level surface.
  • SR2 - SR2 is for normal standard floors in commercial and industrial projects and can deviate from the straight-edge by up to 5mm.
  • SR3 - SR3 is utility standard where a quality finish is not required. This level can have a maximum permissible deviation of ten millimetres.

If you need to check the screeded floor for load bearing, a structural engineer is necessary to perform the tests. This test will ascertain the overall strength of the screed surface and its viability for the intended use. A "drop hammer test" will be performed on different areas of the screed and the outcomes noted. Only fully qualified structural engineers obeying the BS8204 guidelines are allowed to conduct such tests and sign off on the structural safety of the screeding. (Tags: Floor Screeding Silsden, Screeding Silsden, Floor Screed Silsden, Floor Screeding Services Silsden).

Book a Screeder in Silsden UK

Granolithic Screeding Silsden

Granolithic screeding is a popular flooring material which is used widely in heavy-duty environments due to its strength and durability. It's made from a mixture of sand, cement, aggregate, and sometimes pigments, which are combined to make a mortar-like mixture. The mixture is poured onto the floor and then smoothed out to an even, level surface.

The resulting flooring is hard-wearing, slip-resistant and easy to clean, making it ideal for use in areas with high foot traffic, such as shopping centres, factories and schools.

The granolithic screeding process involves preparation of the concrete base, mixing the screed mixture, laying the mixture, and giving it time to cure. Correct application and curing techniques are essential for the longevity and strength of the screed. The screed must be fully cured before any additional flooring is laid.

Coloured Floor Screeds

Coloured floor screeds are a type of flooring material mostly employed in commercial or industrial settings. The unique and distinctive finish of these screeds is accomplished by mixing coloured resins, aggregates, and sealers together. They are commonly used in areas where there is machinery or heavy foot traffic, as they provide a durable and slip-resistant surface that can withstand constant wear and tear.

Customising multi-coloured screeds is an effective way to match a business's branding or create a particular aesthetic in a space. Facilities that demand a high standard of hygiene often prefer them due to their simple maintenance and cleaning requirements. In cleanrooms and similar environments, multi-coloured screeds' seamless finish, which eliminates grout lines or joints, makes them an excellent flooring choice. The freedom to select aggregates based on size, shape, and colour in coloured floor screeds allows architects and designers to create bespoke flooring designs that are tailored to their project requirements. All in all, coloured screeds provide both versatility and practicality as a flooring solution, making them a great option to add style and function to any commercial or industrial space.

Screed Floor Removal Silsden

The procedure of removing screed from a surface involves extracting and eliminating the existing layer. It becomes necessary in many instances during floor upgrades or renovations. To effectively break up and remove the screed layer, specialist techniques and equipment are indispensable in the removal process. This enables the surface to be prepared for new flooring material or other alterations. Contractors with expertise in screed floor removal skillfully carry out the efficient and safe elimination of the previous screed, granting the floor a fresh beginning suitable for design variations, repairs or upgrades. (54332)

Floor Screeding Near Silsden

Also find: Kildwick floor screeding, Cononley floor screeding, Draughton floor screeding, Cross Hills floor screeding, Cowling floor screeding, Eastburn floor screeding, Glusburn floor screeding, Addingham floor screeding, Steeton floor screeding, Riddlesden floor screeding, Sutton-in-Craven floor screeding, Farnhill floor screeding, Beamsley floor screeding, Bradley floor screeding and more.

West Yorkshire Screeders Near Me Silsden

Other Trades Silsden West Yorkshire: Not surprisingly, whenever you are doing home repairs and improvements in Silsden, West Yorkshire, you will probably need all types of different tradespeople and together with screeding in Silsden, West Yorkshire, you could also need an odd job man in Silsden, a building contractor in Silsden, a heating engineer in Silsden, an electrician in Silsden, rubber flooring in Silsden, a carpet fitter in Silsden, waste removal in Silsden, solar panel installation in Silsden, a plasterer in Silsden, SKIP HIRE Silsden, a carpenter in Silsden, vinyl flooring in Silsden, a stonemason in Silsden, cleaners in Silsden, a floor tiler in Silsden, an underfloor heating specialist in Silsden, and other different Silsden tradesmen.

Screeding Related Tasks

Screeding Related Tasks Silsden

There is a variety of work that can be undertaken by your local Silsden floor screeding specialist including monolithic screeding, floor preparation, floor levelling, floor resurfacing, concrete screeds, floor smoothing compounds in Silsden, pumped floor screeds, sand and cement floor screed, domestic screeding, screeded kitchen floors Silsden, office floor screeding, bonded screed, underfloor insulation, resin floor screeding Silsden, concrete floor moisture testing services, lightweight screeding in Silsden, polished screed flooring in Silsden, concrete floor toppings, floor repairs, unbonded screed, shop floor screeding in Silsden, floor noise reduction Silsden, screeding advice, floor screeding tools, underfloor heating screeding, external screeding, cheap floor screeding, granolithic floor screeds, self-levelling floor screeding, flow screeding, anhydrite floor screeding, decorative floor screeding Silsden, screed bathroom floors, acoustic flooring solutions, professional floor levelling services in Silsden, and more floor screeding tasks. These are just a selection of the tasks that are performed by those installing screeding. Silsden professionals will keep you informed about their whole range of services.

TOP - Floor Screeding Silsden

Screeders Silsden - Screeding Silsden - Screeder Silsden - Floor Screeding Near Me - Screeding Services Silsden - Screeding Quotes Silsden - Underfloor Heating Silsden - Floor Levelling Services Silsden - Residential Screeding Silsden


(This screeding Silsden article was written on 18-09-2023)