Floor Screeding Bilston

Bilston Screeding & Floor Levelling Services

Floor Screeding Bilston West Midlands (WV14): If you are renovating a property or cellar, are planning to install under floor heating or have a damaged or uneven floor in your Bilston property, then it is the perfect time to consider hiring a floor screeding professional. Floor screeding gives a smooth finish to a basic sub-base floor, and allows you to lay your final layer of flooring material, (carpets, boards, tiles etc) over the top of it. Floor screeding will provide a high quality and durable floor surface for almost any room.

Free Bilston Floor Screeding Quotes


It does not matter how big or small the room you require to be levelled, a genuine floor screeding contractor in Bilston will have the essential skills, equipment and knowledge to give you an outstanding standard of service. After evaluating your project they will advise you on the perfect choice of screeding and which method of laying it is most appropriate for your circumstances.

Floor Screeding Bilston West Midlands (WV14)

It might be a requirement, depending on the intended use of the space, for a structural engineering survey to conform with building regulations on flex strength, point loadings and load bearing of the screed floor.

A qualified and skilled work force is necessary for a successful outcome and will extend the lifespan of your floor through the use of the right kind of screed for the proposed purpose of your room. Selecting the correct screeding materials and the best installation technique is crucial if you want to finish up with a durable and quality finish for your floor surface.

There are several screeding specialists in the Bilston area so if possible get multiple price quotes for your floor screeding project before choosing a company and know to what standard of finish it's for. The SR (Surface Regularity) finish is the number to keep your eye on when getting an estimate from your Bilston screeding contractor. SR2 and SR3 will be less costly options, however the floor screeding finish may have errors and deviations, whilst SR1 guarantees a pretty much perfect quality of finish. This could mean that you may have to rectify any patches that could cause issues when laying your finished flooring material.

Floor Screeders Bilston (01902)

British Standards BS8204 lays out the regulations and guidelines that all Bilston screeding installers is obliged to follow, and if using specialist screeding solutions, (Gypsol, Flowcrete, Cemfloor etc), they should be certified by the manufacturers as being trained and skilled in their use. The training and assessment of a screeding company by a manufacturer is emphasised by the use of the accreditation scheme, and guarantees safe working practices and reliability on any flooring project involving their materials.

For larger floor screeding projects in factories, schools, hospitals, hotels, shopping centres and warehouses, specialist commercial screeders in Bilston will be needed.


Standard Screeds - A blend of sand and cement which is ideal for standard residential use. 5 parts sand to 1 part cement is the normal mixture for standard screed. This 5:1 ratio standard flooring screed will dry out at a rate of one millimetre per day after applying.

Fibre Reinforced Screed - Used mostly with underfloor heating and is the suggested option in such projects. This is because of the increased durability and protection against thermal shrinkage and cracking provided by the fibres within the screed. It dries out at an identical rate to a standard screed, at about one millimetre per day.

Screeding Quotes Bilston West Midlands

Industrial and Heavy Duty Screed - A screed that's designed for high load and heavy traffic areas where maximum strength and durability is essential.

Fast Drying and Advanced Drying Screeds - As the name suggest, these screeds dry at a quicker rate and allow you to use the floor area much sooner. Drying at a rate of 3-7mm, depending on the specialised mix, they are typically a fibre reinforced screed and are great for flooring projects which have tight deadlines.

Self-Levelling or Liquid Screeds - Used to produce the highest quality of finish, especially where SR1 levels are required, by a latex and cement mixture. It's mainly used to provide a smooth, clean floor over the top of a poor quality or damaged substrate and enables all types of flooring materials to be used. Even with a depth of only 1mm, the latex polymers within the mixture provide a high strength surface for a wide variety of uses.

Polymer Screeds - An extremely high strength solution where a reduced thickness is essential. The curing times vary as outlined by proprietary product guidelines.


To make certain that the screeding is of a high quality finish that's hard wearing and durable, time must be devoted to preparing the area prior to any screed being laid. It's important that all contaminants such as loose debris, paint, oil or grease is eradicated from the floor surface before pouring any screed, since these can affect the adhesion capability that a quality screed demands.

Screeding Near Bilston (WV14)

Any cleaning chemicals which are used during this stage should leave no residues, and the floor base must be permitted to dry by itself naturally. If screeding over a cement or stone floor all cracks should be repaired to prevent them from "travelling" up through the screed layer and causing deviations on the final surface. A reputable Bilston screeding company will take note of such problems during a on-site survey and make sure all preparations are complete before applying the next stages of the screeding process.

To shield the screed layer and flooring materials from moisture rising up from the ground, a damp proof membrane (DPM) will have to be laid. There could be 2 or 3 layers of different thickness polythene to act as a barrier between the insulation layer and screed.

If the area where you live is susceptible to radon gas then another barrier is essential to stop this harmful gas from entering via the ground. If radon is present in severe doses then a complete ventilation and extraction system might be needed underneath the layer of screed which will remove any gases that could seep in from the ground.

As soon as the floor base has been prepared and all membranes installed, a primer or sealer is then applied. A primer helps with the screed bonding correctly to the base and different types exist based on which kind of screed is being used. Equipment such as airless sprays will usually be used to apply a primer or sealant, which should be done by qualified screeding contractors in Bilston sticking to the manufacturer's guidelines and safety advice.

If required, this is the time that under floor heating can be laid out in the correct manner and installed. The under floor heating system is laid out in the correct pattern and secured firmly to insulation panels to prevent any movement during screed pouring process. Warmth is spread evenly across the floor in a properly installed under floor heating system, and along with it being an effective choice of heating, it is a good choice for most Bilston home restoration projects.

Floor Screed Bilston (01902)

The screed can now be mixed and prepared in situ and spread onto the base surface. Your use of the room will help the screeding contractor on which sort of screed is ideal for your requirements. After the pouring of the screed there is a minimum 24 hours (for quick drying screeds) before you can walk on the surface, and a 72 hours minimum drying period before any floor covering installations. If you are aiming to wind up with a well finished and long-lasting floor surface you should stick to the manufacturer's guidelines with regard to standard and heavy duty screeds where this timescale will be increased.

The SR standard of your screed can be verified once it has solidified sufficiently to be stepped onto. The test involves the use of a 2 mtr straight edge laid on the surface and any fluctuations from true are measured.

  • SR1 - SR1 is the highest level and allows only 3mm of disparity from the straight-edge.
  • SR2 - SR2 is the classification for standard commercial and industrial floors and can deviate from the straight-edge by up to five millimetres.
  • SR3 - For utility floors where the finish is comparatively inconsequential the SR3 is the specification and has a deviation measurement of ten millimetres or less.

If you need load bearing checks, a structural engineer is required to conduct the testing. The testing will ensure your newly laid screed surface is viable for the load bearing requirements set down in the original site survey. This should include what's known as a drop hammer test which records specific data on the strength and flexibility of the screed. Only experienced structural engineers heeding the British Standards BS8204 guidelines are permitted to conduct such testing and sign off on the structural safety of a screed floor. (Tags: Floor Screeding Bilston, Floor Screeding Services Bilston, Screeding Bilston, Floor Screed Bilston).

Floor screeding services are available in Bilston and also in: Lanesfield, Blakenhall, Walsall, Parkfields, Moxley, Tipton, Darlaston, Stow Heath, Willenhall, Monmore Green, Princes End, Woods Bank, Wednesbury, Ettingham, Wolverhampton, and in these postcodes WV13 3QJ, WV14 0BQ, WV14 0LQ, WV14 0EP, WV13 3QP, WV13 3HT, WS10 8SS, DY4 9HA, DY3 1LT, WV14 0EF. Local Bilston floor screeders will probably have the telephone code 01902 and the postcode WV14. Verifying this should make sure that you access local floor screeding. Bilston homeowners are able to benefit from these and various other flooring related services.

Book a Screeder in Bilston UK

Latex Screeding Bilston

When a bit of flexibility is required in the surface of a floor you might find that the use of a latex floor screed will be best. Latex floor screeds normally comprise 2 parts - a cementitious powder and a liquid latex additive. The liquid latex part replaces the water that's used in other types of screed, meaning that it's more flexible and quicker drying.

Used for levelling-out sub-floors, this latex product provides a surface for the installation of your chosen floor finish. This is appropriate for substrate made of wood, concrete, sand/cement, asphalt or stone tiles, is perfect for the application of adhesives and gives a smooth and durable surface. Even when there happens to be a bit of movement on your subfloor, this type of screeding will give you a flexible, crack-free finish.

When a screed is being laid on top of a layer of either thermal or acoustic insulation (i.e. a floating screed), latex floor screeds are not appropriate, because in this case (typically when screeding over underfloor heating), you will likely need a thickness of 50 to 65 millimetres.

Screed Floor Removal Bilston

To remove a screed floor, one must extract and eliminate the existing screed from the surface. The necessity often arises when refurbishing or upgrading a a floor in Bilston. Effective breakdown and removal of the layer of screed necessitate the use of specialist equipment and techniques in the removal process. This grants the opportunity to prepare the surface for new flooring material or other alterations. By specialising in screed floor removal, contractors ensure the efficient and safe removal of the old screed, enabling the floor to start anew, whether for repairs, upgrades or design changes. (61087)

Related Tasks

Screeding Related Tasks Bilston

There is a variety of work that can be carried out by your local Bilston floor screeder including granolithic floor screed, professional floor levelling services in Bilston, underfloor heating installation in Bilston, damp proof membranes, screeding advice, unbonded screed, bonded screed in Bilston, floor screed testing, structural screeds Bilston, basement floor screeding Bilston, resin floor screeding Bilston, final floor finishes, decorative floor screeding Bilston, floor screeding tools, screed flooring, domestic floor screeding Bilston, screeding quotations, acoustic flooring, anhydrite floor screeding, industrial floor screeding, conservatory screeding, polished screeding, floor preparation services in Bilston, liquid screeding Bilston, sand and cement screed, flow screeding Bilston, fibre reinforced floor screeding, external screeding, lightweight screeding Bilston, and more floor screeding tasks. These are just a small portion of the tasks that are carried out by people specialising in floor screeding. Bilston specialists will inform you of their entire range of floor screeding services.


Floor Screeding Near Bilston

Also find: Monmore Green floor screeding, Moseley Village floor screeding, Ettingham floor screeding, Parkfields floor screeding, Moxley floor screeding, Woods Bank floor screeding, Stow Heath floor screeding, King's Hill floor screeding, Princes End floor screeding, Lanesfield floor screeding, Blakenhall floor screeding and more.

Floor Screeding Services Bilston

Find Floor Screeding in Bilston Here
Screeding Services in Bilston West Midlands (01902)
  • Bilston Liquid Screeds
  • Bilston Screeding Services
  • Bilston Polished Screed Floors
  • Bilston Floor Damp Proofing
  • Bilston Floor Insulation
  • Bilston Fast-Dry Floor Screeding
  • Bilston Floor Levelling
  • Bilston Screed Calculator Service
  • Bilston Domestic Screeding
  • Bilston Cheap Floor Screeding
  • Bilston Floor Screeding
  • Bilston Floor Screeding Advice
  • Bilston Fibre Reinforced Screeding
  • Bilston Commercial Floor Screeding

Screeding Around Bilston: Property owners living in the following roads have recently requested floor screeding - Shaftsbury Close, Stom Road, Clapgate Gardens, Drakes Green, Clayton Road, The Crescent, Springvale Close, Bow Street, Turner Avenue, Anchor Road, Chelwood Gardens, Tramway Close, Bulger Road, Dover Street, Sarah Close, Chad Road, Angela Place, Crane Road, Slater Street, Britannia Road, Talbot Place, Beacon Street, Tame Street, Arden Place, Chorley Gardens, Temple Street, Clare Crescent, Bickley Road, as well as the following local Bilston postcodes: WV13 3QJ, WV14 0BQ, WV14 0LQ, WV14 0EP, WV13 3QP, WV13 3HT, WS10 8SS, DY4 9HA, DY3 1LT, WV14 0EF. Work was accomplished in these locations by experts in floor screeding. Bilston homeowners benefited from reliable and high quality screeding services in every case.

For the latest local info regarding Bilston, West Midlands check here

Bilston Screeding Jobs: View screeding jobs near Bilston by going here: Bilston Screeding Jobs

Floor screeding in WV14 area, and dialling code 01902.

TOP - Floor Screeding Bilston

Residential Screeding Bilston - Floor Screeding Bilston - Screeder Bilston - Floor Screeding Quotes Bilston - Floor Levelling Bilston - Floor Screeding Contractors Bilston - Self-Levelling Screed Specialists Bilston - Industrial Screeding Bilston - Floor Screeding Near Me


(This screeding Bilston content was generated on 17-10-2023)