Floor Screeding Pontefract

Pontefract Screeding & Floor Levelling Services

Floor Screeding Pontefract West Yorkshire (WF7): When you are renovating your Pontefract home with damaged or uneven floors, or maybe converting a basement or cellar to useable living space, a competent floor screeding company can offer you a good starting point. Before you are able to lay a final floor covering, whether it is carpet, wood or tile, the floor surface should be as flat as possible; this is why floor screeding is needed. If you would like your floors to last a long time then a floor screed is one of the most important factors in any building or renovation project.

Free Pontefract Floor Screeding Quotes


It matters not how small or large the room is that you need levelling, a decent floor screeding company in Pontefract will have the appropriate equipment, knowledge and skills to offer you an outstanding standard of service. They'll be able to assess the project and ascertain the correct type of screed you need and how best to apply it.

Floor Screeding Pontefract West Yorkshire (WF7)

They will additionally assess if a structural engineer is needed to make sure any flex strength, point loadings and load requirements are met as outlined by construction and building regulations.

The training and skills that a screeding specialist brings to your project will guarantee a high quality outcome and help in extending the lifetime of your floor. Selecting the right screeding materials and the best installation technique is crucial if you want to finish up with a quality and durable finish for your floor surface.

There are numerous screeding contractors in and around Pontefract so make sure you get multiple estimates for your floor screeding project before selecting a contractor and know to what standard of finish is it for. For domestic properties an estimate will normally be provided for a Surface Regularity (SR) level of SR1 or SR2. SR2 and SR3 may be more affordable options, however the finished floor surface may have errors and deviations, whilst SR1 guarantees a perfect finish. Any imperfections in the screeding can cause problems in laying flooring owing to ridges, flat spots, indentations in the floor surface.

Floor Screeders Pontefract (01977)

British Standards BS8204 sets down the guidelines and regulations that all Pontefract screeding installers is obliged to follow, and if applying specialist screeding solutions, (Gypsol, Cemfloor, Flowcrete etc), they ought to be approved by the manufacturers as being skilled and trained in their use. The testing and training of a floor screeding contractor by a manufacturer is emphasised by the use of the accreditation scheme, and guarantees safe working practices and reliability on any project which involves their materials.

Pontefract commercial screeders could be involved in floor screeding in warehouses, shops, pubs, schools, factories and hospitals.


Standard Screeds - This is okay for everyday domestic usage and comprises a combination of sand and cement. The ratios involved in standard screeds are 5 parts sand to 1 part cement. Once its been laid this 5:1 ratio will dry at a rate of 1mm each day.

Polymer Screeds - Provides a high level of strength with a reduced thickness. Manufacturer's guidelines for drying times vary across the product ranges.

Industrial and Heavy Duty Screed - Where traffic levels are expected to be high or heavy loading of the floor is necessary, heavy duty screeds allow for maximum strength and durability.

Advanced Drying and Fast Drying Screeds - If there's a need to use the area at the earliest opportunity a fast drying screed can be employed. They're normally a fibre reinforced kind of screed that dries out at a rate of between three and seven millimetres per day and are employed in time-sensitive projects.

Fibre Reinforced Screed - The favoured choice by professional installers for use with under floor heating systems. The special fibres in the screed mix enhance overall strength and durability whilst also protecting against thermal cracking and shrinkage. It sets at an identical rate to a standard screed, at about one millimetre per day.

Screeding Quotes Pontefract West Yorkshire

Self-Levelling or Liquid Screeds - When a high standard of finish is necessary this formula of latex and cement is employed to achieve SR1 quality floor screeding. The self-levelling compound provides a clean and level surface over a damaged floor or rough substrate to enable all flooring materials to be laid. Even with a thickness of one millimetre, the latex polymers within the screed provide a high strength surface for a wide variety of uses.


Preparation is essential for a high quality screed surface that will be hard wearing and durable. It's important that all contaminants such as grease, paint, oil or debris is eliminated from the floor before pouring any screed, because these can affect the bonding capability that a quality screed requires.

Screeding Near Pontefract (WF7)

If cleaning products have been used it's essential to remove any remnants of detergent or soap, and allow the floor surface to dry naturally. It is necessary to repair any cracks in the floor surface to prevent them being mirrored and "travelling" up into your freshly screeded floor. A site survey will allow your Pontefract screeding installer to pinpoint these preparation areas and complete them before commencing to apply the screed layer.

To protect the screeding layer and flooring materials from moisture rising up from the ground, a DPM (damp proof membrane) will have to be installed. The DPM is made out of thick polythene and various layers may be used to act as a moisture barrier for the screeding.

If the area is susceptible to radon then one additional barrier is essential to prevent the gas from entering via the ground. This could be just a simple air-tight membrane, or in more serious cases a ventilation and extraction system is installed under the screeding to take away any inflow of radon gas from ground level.

As soon as these steps have been taken the screeding company will apply a sealant or primer to the prepared base surface. Sealers and primers help the bonding process and are specialist applications specifically designed for the sort of screed that is being used. Devices such as airless sprays will usually be used to apply a sealant or primer, by experienced screeding companies in Pontefract observing the manufacturer's guidelines.

Under floor heating can now be laid out, installed and tested before screeding is applied. The heating pipes and cables are firmly attached to insulation panels to stop any movement and make certain that they're laid in the correct position. Warmth is evenly spread across a floor area in a properly fitted under floor heating system, and in conjunction with it being an effective method of heating, it's an excellent choice for many Pontefract home renovation projects.

Floor Screed Pontefract (01977)

If you aren't fitting under floor heating the screed can now be mixed and prepared on site and poured. Your use of the room will assist your screeding contractor on which type of screed is appropriate for your requirements. After the pouring of the screed there will be a minimum twenty four hours (for quick drying and advanced screeds) before you're able to walk over the surface, and a 72 hrs minimum setting period for any floor material installations. If you are using heavy duty or standard screeds the setting time is increased and the manufacturer's guidelines must be followed so as to get the best finish to your floor.

The SR level of your screed can be confirmed once it has solidified enough to be walked upon. The test involves the use of a 2m straight edge laid on the floor surface and any variations from true are measured.

  • SR1 - SR1 is the best specification and permits just three millimetres of deviation from the straight-edge.
  • SR2 - SR2 is the classification for normal standard floors in industrial and commercial projects and can deviate from the straight-edge by as much as 5 millimetres.
  • SR3 - SR3 is utility standard where a quality finish isn't required. This classification allows for a maximium deviation of ten millimetres.

If your screed floor has been installed with particular load bearing requirements in mind then a qualified structural engineer is going to be needed to conduct the tests. The testing will make sure that your newly laid screeding is viable for the load bearing requirements set down in the site survey. The screeding will be given a "drop hammer test" to assess strength and flexibility at specific points. Only fully qualified structural engineers following the British Standards BS8204 guidelines are allowed to conduct these testing and sign off on the structural integrity of the screeding. (Tags: Screeding Pontefract, Floor Screeding Services Pontefract, Floor Screed Pontefract, Floor Screeding Pontefract).

Book a Screeder in Pontefract UK

Latex Floor Screed Pontefract

When the nature of your floor's surface means that a bit of flexibility is required, it will be an advantage to use a latex self-levelling floor screed, as opposed to one with a more rigid finish. Latex screeds come in 2 parts - a bag and a bottle - with a bottle that contains liquid latex, and a bag that contains a cement powder. Latex screeds are more flexible and quicker drying than standard screeds, since the water that is normally used is substituted with the latex liquid.

This latex product is used for levelling sub-floors prior to the laying of your chosen decorative covering. Producing a resilient and smooth surface that's perfect for the application of flooring adhesives, this screed is is suitable for use on sub-floors of asphalt, concrete, quarry tiles, sand/cement and wood. This type of latex screeding will give you a flexible, crack-free finish, even if there happens to be movement in your sub-floor.

When using a "floating" screed, for instance when screeding is being laid on the top of underfloor heating, depths of 50-65mm may be required, and latex flooring screeds aren't appropriate in this instance. (Tags: Latex Screeding Pontefract, Latex Screed Pontefract, Latex Screeds Pontefract, Latex Floor Screed Pontefract).

Pontefract Skip Hire Services

Skip Hire Pontefract

When you are planning for any property makeovers or home refurbishments in Pontefract, you will need to make provision for any waste that is generated. Subject to your particular situation, screeding work will create varying levels of waste. Some tradespeople allow for for waste removal when they prepare their quotes, and if this is not itemised ask if it's included, if not you'll need to make your own arrangements.

Whether you are left with doing this yourself, or the tradesperson is sorting it out, a skip will sometimes be required. Skips can be hired in all shapes and sizes, so there is certain to be one out there to suit your precise needs. Mini-skips will generally accommodate 2-3 yds of rubbish, midi-skips accommodate 4-5 yds of rubbish, builders skips accommodate 6-8 yds of rubbish and roll-on-roll-off skips accommodate 20-25 yds of rubbish. Skip bags usually take 1-1.5 yards of waste.

To get rates for the different skip sizes GO HERE.

Related Tasks

Screeding Related Tasks Pontefract

There are a number of different tasks that can be carried out by your local Pontefract floor screeding specialist including garage screeding Pontefract, unbonded screed, screeding repairs, floor screeding quotes Pontefract, basement screeding, anhydrite screed, screed flooring, concrete pumping, floor screeding tools, domestic floor screeding, underfloor heating installation, bonded screed in Pontefract, self-levelling screeding Pontefract, warehouse floor screeding in Pontefract, rapid strength floor screeding, underfloor heating screeding Pontefract, fibre reinforced screeding in Pontefract, liquid screeds, damp proof membranes, floor screed testing, conservatory floor screeding, latex floor screed, acoustic flooring in Pontefract, floating screed in Pontefract, floor preparation services, and lots more floor screeding tasks. Listed are just a handful of the activities that are conducted by those specialising in floor screeding. Pontefract contractors will tell you about their whole range of screeding services.


Floor Screeding Near Pontefract

Also find: Kirk Smeaton floor screeding, Cutsyke floor screeding, Badsworth floor screeding, Ferrybridge floor screeding, Brotherton floor screeding, Wentbridge floor screeding, Fairburn floor screeding, East Hardwick floor screeding, Upton floor screeding, Glasshoughton floor screeding, Darrington floor screeding and more. Screeding services are available in all of these localities. Well-equipped with the necessary expertise and knowledge, these competent professionals excel in delivering the best quality flooring services. They are adept at screeding and ensure that the task is completed to the highest possible standards, whether it’s for domestic or commercial properties. Local householders can obtain screeding quotations by clicking here.

Floor Screeding Services Pontefract

Find Floor Screeding in Pontefract Here
Screeding Services in Pontefract West Yorkshire (01977)
  • Pontefract Polished Screed Floors
  • Pontefract Fibre Reinforced Screeding
  • Pontefract Floor Levelling
  • Pontefract Floor Screeding
  • Pontefract Floor Screeding Advice
  • Pontefract Floor Insulation
  • Pontefract Indistrial Screeding
  • Pontefract Fast-Dry Screeding
  • Pontefract Liquid Screeds
  • Pontefract Cheap Floor Screeding
  • Pontefract Screed Calculator Service
  • Pontefract Floor Damp Proofing
  • Pontefract Residential Floor Screeding
  • Pontefract Underfloor Heating Installation

Screeding Jobs Pontefract: Get floor screeding jobs near Pontefract by clicking here: Screeding Jobs Pontefract

To find out local Pontefract info look here

Floor screeding in WF7 area, (dialling code 01977).

TOP - Floor Screeding Pontefract


(This screeding Pontefract content was created on 21-02-2024)