Floor Screeding Irthlingborough

Irthlingborough Screeding & Floor Levelling Services

Floor Screeding Irthlingborough Northamptonshire (NN9): If you have a damaged or uneven floor, are aiming to install underfloor heating or are restoring a property or basement in your Irthlingborough property, then it is a good time to consider bringing in a floor screeding professional. Floor screeding gives a smooth, level finish to a coarse sub-base floor, and will allow you to lay a suitable flooring material, (boards, tiles, carpets etc) on top of it. If you would like your floors to last a long time then floor screeding is the most important factor in any renovation or building task.

Free Irthlingborough Floor Screeding Quotes


Whatever size room or area you're renovating, a local screeding specialist in Irthlingborough can provide you with the experience and correct working practices to generate the perfect base for your flooring. They will be able to assess the project and verify the appropriate kind of screed you need and the best strategy for applying it.

Floor Screeding Irthlingborough Northamptonshire (NN9)

It may be necessary, depending on the proposed use of the area, for a structural engineering survey to conform with building regulations on load requirements, flex strength and point loadings of the screed floor.

Working with a skilled and qualified contractor will ensure you get the appropriate form of screed for the room's proposed purpose to extend the life of your flooring. The correct mix of screed and the methods used in laying it are also vital to guarantee the final quality of your floor.

There are numerous screeding companies in the Irthlingborough area so see if you can get multiple estimates for your project before choosing a company and know to what standard of finish it's for. The quote might be based on what's called the Surface Regularity, or SR number. SR1 is the highest quality, and while SR2 and SR3 might be less costly at first glance, they do not guarantee a perfectly even or flat floor surface. Any errors or imperfections in the screeding may cause problems in laying flooring owing to ridges, indentations, flat spots in the floor surface.

Floor Screeders Irthlingborough (01933)

Every Irthlingborough screeding company must adhere to British Standards (BS8204) and should have some form of accreditation from screeding material and equipment manufacturers, for instance Flowcrete, Cemfloor, Gypsol. A contractor holding accreditations shows that they've been assessed and trained in the use of these screeding products and can deliver a high quality standard in all areas of their installation.

For larger screeding projects in hotels, factories, warehouses, hospitals, shops and schools, dedicated Irthlingborough commercial screeders will be required.


Standard Screeds - This is acceptable for standard residential usage and is a mix of sand and cement. The standard screed is a mixture of five parts sand to one of cement. After laying a standard flooring screed sets at a rate of just 1mm/day.

Polymer Screeds - An extremely high strength solution where a reduced thickness is needed. Maker's guidelines for setting times differ across the various product ranges.

Fibre Reinforced Screed - Mostly used with underfloor heating systems and is the preferred option in such projects. The increased strength and flexibility provided by the fibres in the screed help protect the floor from shrinkage and cracking due to heat. It sets at the same rate as a standard screed, at about 1mm per day.

Self-Levelling or Liquid Screeds - When a high standard of finish is required this blend of cement and latex is employed to create SR1 quality screeding. This self-levelling compound provides a clean and smooth surface over a damaged floor or rough substrate to allow all flooring materials to be laid. The liquid screed can be laid to a thickness of only 1mm, but still provides a high strength base to take a selection of flooring finishes.

Screeding Quotes Irthlingborough Northamptonshire

Advanced Drying and Fast Drying Screeds - As the name suggest, these screeds dry quickly and allow you to use the floor area much sooner. Drying out at a rate of three to seven millimetres, depending on the mixture, they're generally a fibre reinforced type of screed and are suitable for flooring projects which have tight deadlines.

Industrial and Heavy Duty Screed - A screed that is designed for heavy traffic and high load areas where maximum strength and durability is essential.


Screeding installers will need to prepare all areas before proceeding with any other work in order to ensure a high quality and hard wearing screed flooring. It is vital that any contaminants such as grease, paint, loose debris or oil is eliminated from the floor surface before laying any screed, because these can affect the bonding capability that a good quality floor screed requires.

Screeding Near Irthlingborough (NN9)

If any cleaning products were used during this stage it is crucial to make sure that no residues of detergents, soaps or other cleaning products are left on the floor surface and it's permitted to dry out naturally. If screeding over a stone or cement floor any cracks should be repaired to stop them from "travelling" up through a screed layer and resulting in imperfections on the final surface. A professional Irthlingborough screeding installer will take note of such aspects during the site survey and make sure all preparations are complete before applying the next stages of the floor screeding process.

A DPM (damp proof membrane) will be put down after the preparation work has been completed to stop ground dampness getting into the flooring materials and screed. The DPM is made out of thick polythene and various layers could be used to act as a moisture barrier and air insulating layer for the screeding.

An additional airtight barrier could be needed if your home or business premises is in a location that is known to be prone to radon gas. This can be as simple as an air-tight membrane, or in more serious situations an extraction and ventilation system will need to be installed beneath the screeding to extract any inflow of radon gas from the ground.

The final stage of surface preparation is the spraying or painting of a primer or sealant. These primers and sealers will make certain that the screed bonds successfully to the base and help to produce a top quality finished floor. These materials require skilled technicians to apply them in the right ratios by using airless sprays and other bespoke equipment.

Before any screed is poured, any underfloor heating will now be installed. The cables and heating pipes are firmly attached to insulation panels to stop any movement and ensure that they are positioned correctly. When properly installed an underfloor heating system is an excellent way to warm a room and high quality screeding retains its heat, producing an even heat right across the floor surface.

Floor Screed Irthlingborough (01933)

If you aren't putting in underfloor heating the screed will now be mixed and prepared on site and poured. Your use of the room will help the screeding contractor on what kind of floor screed is best for your requirements. Be aware that even advanced and quick drying screeds have a minimum of twenty four hours before you are able to walk over any screeded surface and at least 72 hours before any flooring materials can be laid. Manufacturer's drying instructions for standard and heavy duty screeds should be observed so as to achieve a quality finish and end up with an even and stable surface.

As soon as the screed has hardened it can be checked for quality to determine its SR standard. The test involves the use of a 2 mtr straight edge laid down upon the floor surface and any variations from true are calculated.

  • SR1 - SR1 is the highest standard and allows just three millimetres of deviation from the straight-edge.
  • SR2 - The normal standard flooring in commercial and industrial builds is classed as SR2 and has a maximum possible deviation of 5 millimetres across the whole screeded floor.
  • SR3 - If the deviation around the whole space is 10 millimetres or less the quality of the screeding is classified as SR3 and is fine for utility and garage areas.

If you need to check the screed floor for load bearing, a qualified structural engineer is required to perform the tests. This assessment will establish the strength of the screeded surface and its suitability for the proposed use. An assessment called the drop hammer test is performed at several areas on the screed layer and the results recorded. The specialist testing and measurement tools required mean this can only be performed by a certified structural engineer respecting the guidelines of BS8204. (Tags: Screeding Irthlingborough, Floor Screeding Services Irthlingborough, Floor Screeding Irthlingborough, Floor Screed Irthlingborough).

Floor screeding services are available in Irthlingborough and also nearby in: Upper Dean, Raunds, Caldecott, Burton Latimer, Stanwick, Yelden, Rushden, Chelveston, Little Addington, Little Irchester, Wymington, Isham, Finedon, Higham Ferrers, Irchester, Hargrave, and in these postcodes NN9 5QU, NN9 5TF, NN9 5RR, NN9 5PT, NN9 5SJ, NN9 5WD, NN9 5FG, NN9 5UN, NN9 5XB, NN9 5SS. Locally based Irthlingborough floor screeders will probably have the telephone dialling code 01933 and the postcode NN9. Checking this should guarantee that you access locally based floor screeding. Irthlingborough home and business owners are able to benefit from these and countless other related services.

Book a Screeder in Irthlingborough UK

The Tools That Are Required for Screeding Floors

  • Floor Profiler
  • Float
  • Gloves
  • Straight Edge
  • Spiked Roller
  • Tape Measure
  • A Long Spirit Level
  • Knee Protection
  • Shovel
  • Buckets
  • Trowel

Related Tasks

Screeding Related Tasks Irthlingborough

There are a whole host of tasks that can be carried out by your local Irthlingborough floor screeding specialist including rapid strength screeds, floor screeding, basement floor screeding Irthlingborough, screed aftercare, lightweight screeding, screed testing, residential floor screeding, fibre reinforced screeding, polished floor screeding in Irthlingborough, bonded screed, external screeding, garage floor screeding Irthlingborough, screed reinforcement, substrate floor preparation Irthlingborough, fast drying floor screeds, decorative floor screeding Irthlingborough, school floor screeding, floor screeding tools, floor screeding advice in Irthlingborough, thin bed floor screeding Irthlingborough, anhydrite screed, screed repairs, sand and cement floor screeding, coloured floor screeding Irthlingborough, acoustic flooring solutions in Irthlingborough, screed flooring Irthlingborough, latex floor screed, liquid screeds, and more floor screeding tasks. Listed are just a selection of the activities that are accomplished by people specialising in screeding. Irthlingborough providers will be delighted to keep you abreast of their whole range of services.

Irthlingborough Skip Hire

Skip Hire Irthlingborough

There is probably going to be quite a bit of waste created when you are doing any type of property revamps or home refurbishments in Irthlingborough. Even though screeding isn't one of those jobs that generally produces a lot of waste, that is not always the case, and it will depend on the scale of your particular installation. It could be the case that the removal of waste is listed in your quote, since some floor screeders are perfectly happy to remove waste as part of the process. Make sure you ascertain this, because you might be landed with handling your own waste removal.

Regardless of whether the tradesman is sorting this out or you are doing it yourself, hiring a skip will often be the best waste removal solution. Skips are available in many different sizes, so you ought to be able to get one that's suitable for you. Mini-skips will generally accommodate 2-3 yds of rubbish, midi-skips accommodate 4-5 yds of rubbish, builders skips accommodate 6-8 yds of rubbish and roll-on-roll-off skips accommodate 20-25 yds of rubbish. Skip bags normally take 1-1.5 yards of waste.

You can GO HERE for the latest skip hire prices in Irthlingborough.


Floor Screeding Near Irthlingborough

Also find: Finedon floor screeders, Chelveston floor screeders, Irchester floor screeders, Raunds floor screeders, Isham floor screeders, Little Addington floor screeders, Stanwick floor screeders, Wymington floor screeders, Little Irchester floor screeders, Upper Dean floor screeders, Yelden floor screeders, Rushden floor screeders, Caldecott floor screeders, Burton Latimer floor screeders, Higham Ferrers floor screeders, Hargrave screeding services and more. Most of these areas are catered for by companies who do screeding. Irthlingborough home and business owners can get price quotes by going here.

Floor Screeding Services Irthlingborough

Find Floor Screeding in Irthlingborough Here
Screeding Services in Irthlingborough Northamptonshire (01933)
  • Irthlingborough Cheap Screeding
  • Irthlingborough Screeding Services
  • Irthlingborough Liquid Screeds
  • Irthlingborough Floor Screeding Advice
  • Irthlingborough Underfloor Heating Installations
  • Irthlingborough Fast-Dry Screeding
  • Irthlingborough Domestic Floor Screeding
  • Irthlingborough Screed Calculator Service
  • Irthlingborough Floor Levelling
  • Irthlingborough Floor Insulation
  • Irthlingborough Floor Damp Proofing
  • Irthlingborough Indistrial Floor Screeding
  • Irthlingborough Polished Screed Floors
  • Irthlingborough Floor Screeding

Screeding Around Irthlingborough: Floor screeding has recently been required in these Irthlingborough areas - Glovers Close, Straws Close, Garrow Close, Presland Way, Mcgibbon Walk, Noble Avenue, Ebbw Vale Road, Bugby Drive, Lucas Close, The Sidings, Merefields, Pipers Close, Warrens Close, Randall Close, Premier Way, The Shortlands, Mountfield Road, High Street, Ryehill Close, Diamond Drive, Home Close, Drayton Place, Finedon Road, Elizabeth Way, Lakeside, as well as these Irthlingborough area postcodes: NN9 5QU, NN9 5TF, NN9 5RR, NN9 5PT, NN9 5SJ, NN9 5WD, NN9 5FG, NN9 5UN, NN9 5XB, NN9 5SS. These locations recently saw activity by experts in floor screeding. Irthlingborough homeowners enjoyed the benefits of reliable and high quality screeding services in every case.

If you want local information relating to Irthlingborough, Northamptonshire click here

Screeding Jobs Irthlingborough: Find screeding jobs in Irthlingborough by going here: Irthlingborough Screeding Jobs

Floor screeding in NN9 area, and dialling code 01933.

TOP - Floor Screeding Irthlingborough


(This screeding Irthlingborough article was written by S Locke 30-06-2022)