Floor Screeding Kinross

Kinross Screeding & Floor Levelling Services

Floor Screeding Kinross Scotland (KY13): If you are planning to install underfloor heating, have an uneven or damaged floor or are renovating a property or cellar in your Kinross property, it is time to think about bringing in a professional floor screeding company. Floor screeding provides a smooth finish to a basic sub-base, and will allow you to lay a suitable flooring material, (boards, tiles, carpets etc) on top of it. Floor screeding can provide a durable, quality surface for almost any room.

Free Kinross Floor Screeding Quotes


It does not matter how small or large the area you require to be levelled, a genuine screeding specialist in Kinross will have the necessary knowledge, skills and equipment to give you an excellent level of service. They'll be able to assess your project and figure out the correct sort of screed you need and the best strategy for applying it.

Floor Screeding Kinross Scotland (KY13)

It might be necessary, depending on the intended use of the space, for a survey by a structural engineer to abide by building regulations on point loadings, load requirements and flex strength of the screed floor.

Working with a skilled and highly trained specialist will ensure you get the proper type of screed for the room's anticipated usage to extend the lifetime of your flooring. The correct mix of screed and the way it is laid is also crucial to guarantee the ultimate intergrity of your floor surface.

Before deciding upon a screeding contractor from those operating in the Kinross area, ask to what standard of finish they are basing their estimate, and also make certain you get multiple quotes. The quote may be based on what is known as the SR, or Surface Regularity figure. SR2 and SR3 will be more affordable options, but the finished floor surface might have errors and deviations, whilst SR1 guarantees a pretty much perfect finish. An SR2 or SR3 level may mean there will be flat spots or ridges that could cause problems when putting down your final floor surface.

Floor Screeders Kinross (Dialling code	01577)

British Standards BS8204 lays down the regulations and guidelines that all Kinross screeding companies must follow, and if applying specialist screeding solutions, (Flowcrete, Cemfloor, Gypsol etc), they ought to be certified by the manufacturers as being skilled and trained in their use. A contractor holding accreditations demonstrates they've been trained and assessed in using these products and can provide a high standard of service in all areas of their installation.

Kinross commercial screeders might be involved in screeding floors in warehouses, schools, factories, hotels, shops and hospitals.


Standard Screeds - A mix of sand and cement which is ideal for normal domestic usage. 5 parts sand to 1 part cement is the normal mix for standard screeds. Once laid this 5:1 ratio will dry at a rate of one millimetre per day.

Screeding Quotes Kinross Scotland

Polymer Screeds - A high strength solution where a reduced thickness is necessary. Because of their different chemical compositions, polymer screeds have varying drying times which you can verify by checking manufacturer's product guidelines.

Liquid or Self-Levelling Screeds - When a high standard of finish is required this solution of latex and cement is employed to create SR1 quality screed flooring. This self-levelling compound provides a smooth and clean surface over a rough substrate or damaged floor to allow all kinds of flooring materials to be laid. Even with a depth of just 1mm, the latex polymers within the mixture provide a high strength screed for a variety of uses.

Fast Drying and Advanced Drying Screeds - As the name suggest, these screeds dry at a quicker rate and allow you to use the screeded area much faster. These are usually a fibre reinforced screed which can dry at a rate of between three and seven millimetres per day and are used in time critical projects.

Industrial and Heavy Duty Screed - Where traffic levels are high or heavy loading on the floor is required, heavy duty screeds offer maximum durability and strength.

Fibre Reinforced Screed - The favoured option where underfloor heating is being installed in domestic properties in Kinross. This is due to the increased durability and protection against thermal shrinkage and cracking offered by the fibres within the screed mix. At about 1mm per day, it has a similar curing rate to standard screed.


Preparation is vital for a high quality screed surface that will be durable and hard wearing. The existing floor surface should be thoroughly cleaned to eradicate any grease, oil, paint and debris which might affect the adhesion of the screed.

Screeding Near Kinross (KY13)

If cleansing products were used it's crucial to remove any residues of detergent, soap etc, and leave the floor surface to dry naturally. If screeding over a stone or cement floor any cracks should be mended to stop them from "travelling" through your screed layer and causing imperfections on the finished surface. An on-site survey will allow the screeding company to identify these preparation areas and complete them before starting to lay the screeding.

Before the screeding can be laid a DPM (damp proof membrane) must be installed to protect the screed and final flooring from dampness. The damp proof membrane is made from thick polythene sheeting and different layers may be used to serve as a moisture barrier and air insulating layer for the screeding.

If the area is at risk from radon then another barrier is required to prevent the gas from entering from the ground. If radon occurs in large amounts then a full ventilation system may be installed under the screed which will remove any gases that might seep in from the ground.

The final phase of the surface preparation process is the painting or spraying of a sealer or primer. Primers and sealers assist with the bonding process and are specialist applications matched to the sort of screed being used. These substances need qualified tradesmen to apply them in the appropriate ratios by using airless sprays and other tailor-made equipment.

If required, this is the time that under floor heating can be laid out in the correct manner and installed. Insulation panels can be arranged and the cabling and heating pipes will be firmly mounted so that there is no movement whilst the screed is applied. When professionally installed an underfloor heating system is an effective way to warm a room and good quality screeding retains its heat, producing an even heat across the floor surface.

Floor Screed Kinross (Dialling code	01577)

Obviously, if you're not fitting underfloor heating, you can ignore this stage and get on with applying the screed. Your use of the room will assist the screeding contractor on which type of floor screed is ideal for your needs. For quick drying and advanced screeds there will be at least 24 hours delay before it is able to be walked over, and a further seventy two hours minimum before you can install any flooring materials. Manufacturer's drying guidelines for standard and heavy duty screeds should be observed in order to achieve a quality finish and end up with an even and stable surface.

As soon as the screeding has hardened it can be quality checked to verify its SR standard. The standard SR test involves the use of a 2 metre straight edge to check for any fluctuations in the screeded surface.

  • SR1 - SR1 is the best standard and allows only three millimetres of deviation from the straight-edge.
  • SR2 - If the floor deviates from the straight edge by 5mm or less it is classified as SR2 quality and is the normal standard for commercial and industrial projects.
  • SR3 - If the deviation is 10 millimetres or less the quality of the screeding is classified as SR3 and is suitable for garage and utility areas.

There may also be a requirement for a structural engineer to perform a soundness test. The testing will make sure that your newly laid screed is suitable for the load bearing requirements laid out in the original site survey. This can include what's known as a "drop hammer test" which assesses various aspects of the flexibility and strength of the screed. Any screed floor that has load bearing requirements must be approved by a trained structural engineer respecting the British Standards BS8204 regulations. (Tags: Floor Screed Kinross, Screeding Kinross, Floor Screeding Kinross, Floor Screeding Services Kinross).

Floor screeding services are available in Kinross and also in: Dalqueich, Cleish, Carnbo, Ballingry, Lochore, Glemlomond, Scotlandwell, Middleton, Milnathort, Upper Tillyrie, Kinnesswood, Glenfarg, Balgedie, Mawcarse, Arlary, Warroch, Lethangie, Criagow, Balado, Duncrievie, Crook of Devon, and in these postcodes KY13 8DX, KY13 8EG, KY13 8AD, KY13 8DY, KY13 8AW, KY13 8QZ, KY13 8QS, KY13 8BZ, KY13 8GJ, KY13 8DF. Locally based Kinross floor screeders will likely have the dialling code Dialling code 01577 and the postcode KY13. Verifying this will ensure that you access locally based screeding. Kinross householders will be able to benefit from these and various other related services.

Book a Screeder in Kinross UK

Latex Floor Screed Kinross

When a certain amount of flexibility is needed in the surface of a floor you might find that using a latex screeding will be advantageous. Latex floor screeds generally comprise two parts - a cement-based compound, and a liquid latex mixture. Latex screeds are more flexible and quicker drying than standard screeds, because the water which is normally used is substituted for the liquid latex.

This latex product is used for levelling-out subfloors prior to the laying of the final decorative covering. Giving a durable, smooth surface that is ideal for the application of flooring adhesives, this screed is is suitable for use on subfloors of concrete, sand/cement, stone tiles, asphalt and wood. If there is a bit of movement in the subfloor this latex floor screed will produce a flexible, crack-free finish on which you can lay your chosen floor coverings.

Latex flooring screeds aren't suitable where a "floating" screed is required, for example when a screed is being laid on top of a membrane of either thermal or acoustic insulation, such as may be the case when you're screeding over underfloor heating, and screed depths of 50mm-75mm may be required. (Tags: Latex Screeding Kinross, Latex Floor Screed Kinross, Latex Screed Kinross, Latex Screeds Kinross).

Related Tasks

Screeding Related Tasks Kinross

There is a wide range of work that can be completed by your local Kinross floor screeding company including floor levelling, waterproof floor screeding, screeding repairs in Kinross, commercial screeding, floor restoration, floating screed, concrete screeds, damp proof membranes Kinross, substrate floor preparation, conservatory screeding Kinross, polished floor screeding, floor screeding advice in Kinross, polished screed flooring, structural screeds Kinross, underfloor heating installations, concrete pumping, floor screeding quotations, cellar floor screeding in Kinross, rapid strength floor screeding, floor insulation Kinross, underfloor heating screeds, floor noise reduction, floor screeding tools, flow screeding, fast-dry floor screeds in Kinross, final floor finishes, school floor screeding, floor screed testing, and more floor screeding tasks. These are just a few of the activities that are conducted by those installing floor screeding. Kinross contractors will let you know their whole range of services.

The Tools You'll Need For Floor Screeding

  • Trowel
  • Gloves
  • Wheelbarrow
  • Spade
  • Spiked Roller
  • Straight Edge
  • Float
  • Floor Profiler
  • Spirit Level
  • Knee Protection
  • Tape Measure

Floor Screeding Near Kinross

Also find: Cleish floor screeding, Milnathort floor screeding, Lochore floor screeding, Glemlomond floor screeding, Balado floor screeding, Glenfarg floor screeding, Scotlandwell floor screeding, Upper Tillyrie floor screeding, Arlary floor screeding, Carnbo floor screeding, Dalqueich floor screeding, Kinnesswood floor screeding, Ballingry floor screeding, Mawcarse floor screeding, Criagow floor screeding, Warroch floor screeding, Balgedie floor screeding, Lethangie floor screeding, Middleton floor screeding, Duncrievie floor screeding, Crook of Devon screeding services and more. All these towns and villages are covered by companies who do screeding. Kinross home and property owners can get screeding quotes by going here.

Floor Screeding Services Kinross

Find Floor Screeding in Kinross Here
Screeding Services in Kinross Scotland (Dialling code	01577)
  • Kinross Screeding Services
  • Kinross Indistrial Screeding
  • Kinross Cheap Screeding
  • Kinross Floor Damp Proofing
  • Kinross Polished Screed Floors
  • Kinross Screed Calculator Service
  • Kinross Floor Insulation
  • Kinross Fast-Dry Floor Screeding
  • Kinross Fibre Reinforced Floor Screeding
  • Kinross Liquid Screeds
  • Kinross Underfloor Heating Installation
  • Kinross Floor Screeding
  • Kinross Domestic Floor Screeding
  • Kinross Floor Screeding Advice

Screeding Around Kinross: Floor screeding has recently been required in the following Kinross streets - Queens Crescent, Dun Aluinn, Burnbrae, Sandport Close, Burns Begg Street, Lathro Park, Talla Park, Ledlanet Lodge, Jetrigg, Pier Road, Mill Street, Gordon Place, Broom Court, Auchlyne, Woodend Tullibole, Hopefield Place, Loch Leven Sluice House, Old Causeway, Springfield Park, Shanwell Lodge, Montgomery Street, Coventry Place, Thorntonhill, High Street, Twin Pines, East Brackley Grange, Kinross Garden Centre, Myre Terrace, as well as these local Kinross postcodes: KY13 8DX, KY13 8EG, KY13 8AD, KY13 8DY, KY13 8AW, KY13 8QZ, KY13 8QS, KY13 8BZ, KY13 8GJ, KY13 8DF. Work was executed in these locations by experts in floor screeding. Kinross business and home owners were given reliable and top notch floor screeding services in all cases.

For the best local Kinross info look here

Floor screeding in KY13 area, and dialling code Dialling code 01577.

TOP - Floor Screeding Kinross


(This screeding Kinross article was created by S Locke 11-05-2022)