Floor Screeding Filton

Filton Screeding & Floor Levelling Services

Floor Screeding Filton Gloucestershire (BS34): If you are restoring a property or basement, have an uneven or damaged floor or are looking to install under floor heating in your Filton property, then it is time to think about bringing in a professional floor screeding company. Allowing you to lay a suitable flooring material, (carpets, tiles, boards etc) over it, floor screeding provides a smooth finish to a coarse sub-base floor. A floor screed is an important component of most restoration and building projects in Filton.

Free Filton Floor Screeding Quotes

FLOOR SCREEDING CONTRACTORS FILTON

A dependable floor screeding company in Filton will have experience and knowledge to help you achieve a perfectly finished floor in whatever shape or size of room you're renovating. To establish the right form of screed you need, and the best way to install it, they'll do a diligent assessment of your project.

Floor Screeding Filton Gloucestershire (BS34)

It might be a requirement, contingent on the intended use of the area, for a survey by a structural engineer to conform with building regulations on point loadings, flex strength and load requirements of the screed floor.

Skilled and qualified trades-people are essential to a successful result and will extend the life of your floor by using the right sort of screed for the proposed purpose of your room. Selecting the appropriate screeding materials and the method of installation is critical if you want a durable and quality finish for your floor.

Make sure you get more than one estimate for your Filton screeding project and also ask to what standard you are getting each quote. For residential homes a quote will normally be given for a Surface Regularity (SR) calculation of SR1 or SR2. SR2 and SR3 might be cheaper options, however the finished floor surface might have errors and deviations, whilst SR1 guarantees a perfect quality of finish. An SR2 or SR3 standard could mean there are flat spots or ridges that may cause issues when laying your final flooring surface (tile, carpet, wood etc).

Floor Screeders Filton (0117/01454)

All Filton screeding companies must observe British Standards (BS8204) and should have some kind of accreditation from the manufacturers of screeding materials and equipment, e.g. Gypsol, Cemfloor, Flowcrete. A company holding accreditations demonstrates they have been assessed and trained in using these products and can provide a top notch service in all aspects of their installation.

Filton commercial screeders might be involved in screeding floors in shops, schools, hospitals, factories, pubs and warehouses.

TYPES OF SCREED

Standard Screeds - Widely used in residential flooring projects where the blend of cement and sand is okay for regular footfall use. The standard screed is a mixture of five parts sand to one of cement. Once laid this 5:1 ratio will dry at a rate of one millimetre per day.

Self-Levelling or Liquid Screeds - When a high standard of finish is needed this mixture of latex and cement is used to achieve SR1 quality screed flooring. It's mostly used to provide a clean, smooth floor over a damaged or poor quality substrate and enables all types of flooring materials to be used. The liquid screed can be poured to a thickness of only one millimetre, but will still provide a high strength base to take a wide variety of flooring materials.

Polymer Screeds - When a decreased thickness of floor is needed on account of construction requirements, a polymer screed provides a high strength resolution to this problem. Polymer screeds are made by many manufacturers and because of their diverse chemical compositions have distinct curing times for each product.

Screeding Quotes Filton Gloucestershire

Fibre Reinforced Screed - The favoured option where under floor heating is being installed in residential homes in Filton. This is because of the increased durability and protection against thermal cracking and shrinkage provided by the special fibres within the screed. It dries out at an identical rate to a standard screed, at about one millimetre per day.

Industrial and Heavy Duty Screed - Where traffic levels are expected to be high or heavy loading of the floor is needed, heavy duty screeds deliver maximum strength and durability.

Fast Drying and Advanced Drying Screeds - If you need to progress urgently with the flooring because of time restraints, these screeds dry much faster than standard flooring screeds. Drying at a rate of three to seven millimetres, determined by the mixture, they're normally a fibre reinforced type of screed and are ideal for projects which have tight schedules.

SCREEDING PREPARATION AND INSTALLATION

To make certain the screeding is of a high quality finish which is hard wearing and durable, time should be devoted to carefully preparing the area before any screeding material is laid. The existing floor surfaces should be cleaned to eliminate any debris, grease, paint and oil that might affect the bond of the screeding.

Screeding Near Filton (BS34)

If any cleaning products were used in this process it's important to make sure that no residues of soaps or other cleaning products are left on the surface and it is allowed to dry out naturally. It is essential to fix any cracks or crevices in the base to stop them being reflected and "travelling" up into the freshly screeded floor. During an on-site survey the screeding specialist will be able to see what preparation work is necessary before any actual screeding work starts.

To protect the screeding layer and flooring materials from dampness rising up from the ground, a damp proof membrane (DPM) must be installed. Different thicknesses of polythene sheets may be used as a DPM and also act as a barrier for the screed and any insulation materials.

If your home is situated in a place where radon is found an extra barrier layer is needed to stop radon gas from entering. If radon gas is present in severe doses then a complete ventilation system might be needed beneath the screed which will remove any gases that could seep in from ground level.

As soon as these stages have been completed the screeders will put on a primer or sealer to the prepared base. A primer assists in the screed to bond to the base and different varieties exist depending on which kind of screed is being used. These materials require trained contractors to apply them in the right ratios by using tailor-made equipment, such as airless sprays.

Before any screed can be laid, any under floor heating (if required) will now be laid out. Insulation panels will be put in position and the wires and heating pipes will be firmly attached to prevent any movement while the screed is applied. Under floor heating is one of the most efficient ways to heat a room and a properly installed system will provide even warmth all over the floor.

Floor Screed Filton (0117/01454)

If you are not putting in under floor heating the screed will now be prepared on site and poured. Your use of the room will help your screeding specialist on what form of screed is best for your requirements. Don't forget that even advanced and quick drying screeds have a minimum of twenty four hours before you can walk over any laid surface and at least three days before any flooring can be fitted. This time period is increased for heavy duty and standard screeds and the manufacture's product guidelines must be followed to the letter to create the optimal finish and durability of the floor.

Once the screeding has set it can be quality checked to ascertain its SR level. Through the use of a 2 metre straight-edge the surface is examined for any dips, ridges and deviations in the surface of the screed.

  • SR1 - Over the whole area, if there are no deviations of more than 3 millimetres from the straight-edge, you've got a top level SR1 standard surface.
  • SR2 - SR2 is the classification for standard floors in industrial and commercial projects and can deviate from the straight-edge by as much as five millimetres.
  • SR3 - SR3 is basic utility standard where a perfect quality finish is not needed. This classification allows for a maximium deviation of 10 millimetres.

It may also be necessary for a qualified structural engineer to do a soundness test. Using specialist equipment the engineer will ascertain the screeded surface strength and suitability of use in a load bearing setting. The screed layer will be given a drop hammer test to measure flexibility and strength in different areas. Only trained structural engineers respecting the BS8204 guidelines are allowed to carry out these tests and sign off on the structural safety of screed flooring. (Tags: Floor Screeding Services Filton, Floor Screeding Filton, Floor Screed Filton, Screeding Filton).


Floor screeding services are available in Filton and also in nearby places like: Hambrook, Bishopston, Horfield, Henleaze, Cribbs Causeway, Brentry, Henbury, Westbury on Trym, Stoke Bishop, Ashley Down, Frenchay, Little Stoke, and in these postcodes BS34 7PR, BS34 7QD, BS34 7AL, BS34 7AG, BS34 7AJ, BS34 7AF, BS34 7PS, BS34 7BA, BS34 7QF, BS34 7HZ. Locally based Filton floor screeders will most likely have the postcode BS34 and the phone code 0117/01454. Checking this out will make certain that you access locally based screeding. Filton homeowners can benefit from these and numerous other building related services.

Book a Screeder in Filton UK

Latex Screed Filton

When the make-up of your floor's surface means that a bit of flexibility is needed, it may be best to apply a latex self-levelling screed, as opposed to one with a rigid finish. Latex floor screeds come in two parts - a bag and a bottle - with the bottle containing liquid latex and the bag containing a cement based powder. The liquid latex solution takes the place of the water that is used in standard screeds, meaning that it is quicker drying and more flexible.

This latex product is used for levelling sub-floors prior to the laying of the final decorative surface. This screed is appropriate for use on sub-floors of sand/cement, stone tiles, wood, asphalt and concrete, to give a resilient and smooth surface that's perfect for the application of flooring adhesives. This type of screed will provide a crack-free, flexible finish, even if there happens to be movement in your sub-floor.

When using a "floating" screed, for instance when screeding is being laid over underfloor heating, thicknesses of 50-65mm may be needed, and latex floor screeds are not a suitable choice in this instance. (Tags: Latex Screeds Filton, Latex Screed Filton, Latex Screeding Filton, Latex Floor Screed Filton).

Coming Shortly:

Polished screeds Filton.

Floor Screeding Tools

  • Heavy Duty Spirit Level
  • Knee Protectors
  • Straight Edge
  • Gloves
  • Spade
  • Dappling Bar
  • Measure
  • Wheelbarrow
  • Floor Profiler
  • Trowel
  • Float

Related Tasks

Screeding Related Tasks Filton

There are a whole host of tasks that can be conducted by your local Filton floor screeding specialist including floor resurfacing, resin floor screeds Filton, domestic floor screeding, concrete screeding, lightweight screeding, concrete pumping, rapid strength screeding, substrate floor preparation in Filton, pumped screeds, floor levelling, waterproof floor screeding, garage screeding, conservatory floor screeding Filton, floating screed, screed reinforcement, bonded screed, unbonded screed Filton, screed flooring, floor screed repairs, concrete toppings, cheap screeding, screed testing, screed aftercare, self-levelling floor screeding in Filton, smoothing compounds, floor noise reduction, screeding estimates Filton, granolithic screeding, final floor finishes, bonded concrete floor screeding in Filton, monolithic floor screeding, structural screeds, and lots more floor screeding tasks. These are just some of the tasks that are accomplished by those specialising in floor screeding. Filton professionals will keep you informed about their full range of services.

FILTON FLOOR SCREEDING QUOTES (BS34)

Floor Screeding Near Filton

Also find: Henleaze floor screeding, Stoke Bishop floor screeding, Little Stoke floor screeding, Horfield floor screeding, Cribbs Causeway floor screeding, Bishopston floor screeding, Brentry floor screeding, Frenchay floor screeding, Westbury on Trym floor screeding, Ashley Down floor screeding, Henbury floor screeding, Hambrook screeding services and more. All of these areas are serviced by companies who do screeding. Filton homeowners can get floor screeding estimates by going here.

Floor Screeding Services Filton

Find Floor Screeding in Filton Here
Screeding Services in Filton Gloucestershire (0117/01454)
  • Filton Screeding Services
  • Filton Floor Damp Proofing
  • Filton Commercial Floor Screeding
  • Filton Decorative Floor Screeding
  • Filton Cheap Floor Screeding
  • Filton Wet Room Screeding
  • Filton Fast-Dry Screeding
  • Filton Residential Floor Screeding
  • Filton Underfloor Heating Installations
  • Filton Floor Screeding Advice
  • Filton Floor Levelling
  • Filton Floor Screeding
  • Filton Polished Screed Floors
  • Filton Floor Insulation
Gloucestershire Screeders Near Me Filton

Other Trades Filton Gloucestershire: When your Filton home needs remodeling or improvements, many different craftsmen may be necessary to complete the project, and even though your current search is for screeding in Filton, Gloucestershire, you might also need the expertise of a carpenter in Filton, a carpet layer in Filton, a floor tiler in Filton, an underfloor heating specialist in Filton, a handyman in Filton, SKIP HIRE Filton, rubber flooring in Filton, a bricklayer in Filton, an electrician in Filton, a heating engineer in Filton, a plasterer in Filton, a builder in Filton, vinyl flooring in Filton, solar panel installation in Filton, garden clearance in Filton, roof cleaning in Filton, and perhaps others.

Screeding Around Filton: Floor screeders were recently requested by homeowners living in Belmont Park, Cropthorne Road, Dunkeld Avenue, Emma-chris Way, Blenheim Drive, Cleve Road, Elm Park, Stanley Crescent, Pilkington Close, Charlton Avenue, Filton Avenue, The Wicketts, The Brimbles, Eleventh Avenue, Filton Road, The Sidings, Gipsy Patch Lane, Fourth Avenue, Conygre Road, Stuart Maccullum Close, Pine Grove, Kenmore Grove, Holmdale Road, Wades Road, Northville Road, Boverton Road, Bridgman Grove and these Filton postcodes: BS34 7PR, BS34 7QD, BS34 7AL, BS34 7AG, BS34 7AJ, BS34 7AF, BS34 7PS, BS34 7BA, BS34 7QF, BS34 7HZ. These places recently saw activity by specialists in screeding. Filton property owners benefited from high quality and competent floor screeding services on each occasion.

If you're interested in local Filton information check here

Filton Screeding Jobs: See screeding jobs in Filton by clicking here: Screeding Jobs Filton

Floor screeding in BS34 area, phone code 0117/01454.

TOP - Floor Screeding Filton

Screeding Filton - Floor Screeding Near Me - Floor Screeder Filton - Floor Screed Contractors Filton - Floor Screeding Filton - Commercial Screeding Filton - Floor Screeding Estimates Filton - Floor Levelling Services Filton - Residential Screeding Filton

HOME - FLOOR SCREEDING UK

(This screeding Filton content was compiled on 16-01-2023)