Floor Screeding Alsager

Alsager Screeding & Floor Levelling Services

Floor Screeding Alsager Cheshire (ST7): When you're renovating your Alsager home with uneven or damaged floors, or perhaps converting a basement or cellar into a useful living area, an experienced floor screeding specialist will be able to help with your home improvements. Floor screeding delivers a smooth finish to a coarse sub-base floor, and allows you to lay your final layer of flooring material, (carpets, boards, tiles etc) on top of it. A floor screed is an important component of many building and renovation projects in Alsager.

Free Alsager Floor Screeding Quotes


It doesn't matter how small or large the room is that you need to be levelled, a genuine floor screeding company in Alsager will have the appropriate knowledge, equipment and skills to offer you a superb level of service. When your flooring project has been diligently assessed, they'll be in a position to inform you of the correct kind of screed your project needs, and the best methods for applying and installing it.

Floor Screeding Alsager Cheshire (ST7)

Your screeding contractor will also notify you if a structural engineer is needed for your undertaking, to check on point loadings, load bearing and flex strength that your flooring may require to conform with British Standards and building regulations.

The training and skills that a qualified screeding contractor brings to your project should guarantee a successful end result and help to prolong the lifespan of your floors. There are many different types of screeding and choosing the appropriate mix and laying approach is essential to achieve a top quality floor that is fit for purpose and long-lasting.

There are a number of screeding contractors in the Alsager area so see if you can get multiple quotes for your project before selecting a contractor and know to what standard of finish is it for. For residential properties an estimate will generally be given for an SR (Surface Regularity) level of SR1 or SR2. Each of the three SR levels provide different levels of finish, with SR1 being the best, with the lowest amount of deviation over the surface area. An SR2 or SR3 standard could mean there will be flat spots or ridges that might cause issues when putting down your final floor surface.

Floor Screeders Alsager (01270)

British Standards BS8204 lays down the guidelines and regulations that all Alsager screeding contractors is obliged to follow, and if using specialist screeding solutions, (Gypsol, Flowcrete, Cemfloor etc), they should be certified by the manufacturers as being trained and skilled in their use. The assessment and training of a screeding contractor by a manufacturer is highlighted by the use of the accreditation scheme, and guarantees reliability and safe working practices on any flooring project involving their materials.

For larger floor screeding projects in hotels, factories, schools, shops, warehouses and hospitals, dedicated Alsager commercial screeders will be needed.


Standard Screeds - A mixture of sand and cement which is ideal for normal domestic use. This mixture uses a five to one ratio of sand to cement. After laying a standard flooring screed mix dries out at a rate of 1mm/day.

Liquid or Self-Levelling Screeds - A cement and latex mixture which can produce the highest standard of finish to SR1 levels. The self-levelling compound provides a clean and smooth surface over a damaged floor or rough substrate to enable all forms of flooring materials to be laid. This liquid screed can be poured to a thickness of only one millimetre, but still provides a high strength surface to take a selection of flooring finishes.

Fast Drying and Advanced Drying Screeds - As the name would suggest, this screed dries rapidly and allows you to use the floor area much sooner. Drying out at a rate of 3-7mm, subject to the mixture, they're typically a fibre reinforced kind of screed and are ideal for projects that have tight schedules.

Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading on the floor is required, heavy duty screeds deliver maximum strength and durability.

Polymer Screeds - A high strength solution where a reduced thickness is needed. Manufacturer's guidelines for drying times are different across the product ranges.

Fibre Reinforced Screed - Mostly used with under floor heating systems and is the advised choice in such projects. This is due to the improved strength and protection against thermal shrinkage and cracking provided by the special fibres within the screed. The screed will dry out at a rate of 1mm/day.

Screeding Quotes Alsager Cheshire


Screeding companies will need to prepare the area before any other work in order to ensure a high quality and hard wearing screed flooring. It's important that any contaminants such as loose debris, oil, paint or grease is eradicated from the floor surface before laying any screed, since these can affect the adhesion capability that a quality screed demands.

Screeding Near Alsager (ST7)

If cleaning products were used it is important to remove any remnants of detergent or soap, and allow the floor surface to dry naturally. At this stage any cracks need to be repaired since these can easily travel up through your newly laid screed and be visible in the completed floor surface. An on-site survey will allow your Alsager screeding specialist to pinpoint this preparation work and finish it before commencing to apply the screed layer.

Before any screeding can be poured a damp proof membrane (DPM) will have to be installed to protect the screed and final flooring from moisture damage. Different thicknesses of specialised polythene may be used as a DPM and also act as a barrier for the screed and any insulation materials.

If the area is susceptible to radon then an additional barrier is required to stop the gas from entering via the ground. This could be just a simple air-tight membrane, or in more serious situations a ventilation and extraction system is installed underneath the screed to take away any influx of radon gas from ground level.

Once these steps have been taken the screeders will put on a primer or sealer to the prepared base surface. These sealers and primers will make certain that the screed bonds perfectly to the base surface and help create a top quality finished floor. Due to their specialist nature, only trained screeding contractors in Alsager should be entrusted with using them safely and correctly and using equipment that's made for the task.

This is the time that under floor heating can be installed and laid out in the correct way. Insulation panels can be positioned and the heating pipes and wires will be securely attached to prevent any movement while the screed is being poured. Warmth will be evenly spread across a floor area in an expertly fitted under floor heating system, and with it being an effective choice of heating, it's a good choice for most Alsager home renovation projects.

Floor Screed Alsager (01270)

If you're not installing underfloor heating the screed will now be mixed and prepared on site and poured. Your proposed use of the room will assist the screeding company on what kind of floor screed is perfect for your needs. After the pouring of the screed there's a minimum twenty four hours (for quick drying screeds) before you're able to walk on the surface, and a 72 hour minimum drying period before the laying of any floor coverings. If you're using standard or heavy duty screeds the setting time is increased and you must follow the manufacturer's guidelines so as to get the best finish to your floor.

You can check the SR level of the completed screed as soon as it is hardened enough for walking on. The test involves using a 2 mtr long straight-edge laid on the floor surface and any variations from true are calculated.

  • SR1 - Over the whole floor area, if there aren't any disparities greater than 3mm from the straight-edge, then you've got a top quality SR1 specification surface.
  • SR2 - SR2 is the classification for normal standard industrial and commercial floors and can deviate from the straight-edge by up to five millimetres.
  • SR3 - If the deviation is 10 millimetres or less the screed quality is classed as SR3 and is highly suitable for utility and garage areas.

There might also be a requirement for a structural engineer to conduct a soundness test. This test will ascertain the strength of the screeding and its viability for the intended use. The screed will be given a drop hammer test to measure strength and flexibility at distinct points. Only fully qualified structural engineers applying the BS8204 regulations are allowed to carry out such tests and sign off on the structural safety of the screeding. (Tags: Floor Screed Alsager, Floor Screeding Alsager, Floor Screeding Services Alsager, Screeding Alsager).

Book a Screeder in Alsager UK

Screeding is available in Alsager and also nearby in: Oakhanger, Bignall End, Thurlwood, Radway Green, Bathomley, Church Lawton, Scholar Green, Talke Pits, Winterley, Talke, Rode Heath, Chesterton, Betchton, and in these postcodes ST7 2JX, ST7 2GE, ST7 2NX, ST7 2AY, ST7 2LY, ST7 2LQ, CW1 5XA, ST7 2HB, ST7 2FS, and ST7 2DB. Locally based Alsager floor screeders will likely have the phone code 01270 and the postcode ST7. Verifying this should confirm you access local floor screeding. Alsager householders will be able to utilise these and many other building related services. Simply click the "Quote" banner to make enquiries and get price quotes for floor screeding.

Coloured Floor Screeds

The type of flooring material known as coloured screeds is mostly found in industrial or commercial settings. These screeds are formed by mixing coloured resins, aggregates, and sealers, resulting in a distinct and decorative finish. Commonly, they are used in areas with heavy footfall or machinery due to their ability to withstand wear and tear and provide a non-slip surface that is long-lasting.

Multi-coloured screeds offer customisation options to match the brand of a business or achieve a particular aesthetic in a space. Their ease of cleaning and maintenance makes them a sought-after option for facilities that demand a high standard of hygiene. Coloured floor screeds allow architects and designers to select aggregates based on shape, size and colour, giving them the freedom to create bespoke flooring designs tailored to their specific project requirements. Overall, a versatile and practical flooring solution, coloured floor screeds can add both function and style to any commercial or industrial space.

Granolithic Screeding Alsager

Granolithic screeding is a process of creating an even and smooth surface for floor coverings like carpets or tiles. It involves mixing cement, sand, and aggregate such as granite or marble chips to form a mixture, which is then applied to a concrete sub-base. The mixture is levelled with a straight edge to give it a smooth, seamless surface.

The resulting flooring is easy to clean, hard-wearing and slip-resistant, making it ideal for use in areas with high foot traffic, such as factories, shopping centres and schools.

The granolithic screeding process involves preparation of the concrete base, mixing the screed mixture, laying the mixture, and giving it time to cure. Appropriate application and curing techniques are essential for the strength and longevity of the screed. The screed must be completely cured before any additional flooring materials are laid.... READ MORE.

Polished Screed Floors Alsager

For Alsager home and property owners who are looking for a sleek and contemporary flooring option, polished screeds have emerged as an increasingly popular choice. With an even, trowel-finished surface, these screeds create a robust and aesthetically pleasing base for numerous living spaces. Laying a cement-based material that is later polished to a shiny finish is the process, resulting in a floor that is both functional and visually striking.

Polished Screeds Alsager

One of the principal advantages of polished screeds is their low maintenance requirements. Unlike traditional flooring alternatives, polished screeds don't require frequent sealing or waxing. Due to their seamless design, polished screeds resist allergen and dust accumulation, creating a favourable environment for people with allergies and asthma. Polished screeds are also remarkably wear-resistant, guaranteeing a long lifespan and reducing the cost and frequency of replacements and repairs.

The flexibility of polished screeds is something that Alsager home and property owners can also benefit from. From a palette of colours to a selection of finishes, polished screeds provide the ability to personalise your space and match your decor and taste. Whether you are opting for a minimalist look or a more elaborate pattern, polished screeds can accentuate the overall aesthetic of a dwelling. Furthermore, the reflective quality of their surface can maximise natural light, helping to brighten up living spaces and create a more spacious and inviting feel. (Polished Screed Flooring Alsager)

Screed Floor Removal Alsager

The removal of screed from a surface is a practice that involves extraction and disposal. A common requirement arises during floor upgrades or renovations. Specialist equipment and techniques play a crucial role in breaking down and removing the screed layer effectively during the removal process. This enables the surface to be prepared for new flooring or other modifications. Expert professional contractors in screed floor removal carefully eliminate the old screed, guaranteeing efficiency and safety, and allowing the floor to embark on a fresh journey, whether for design changes, upgrades or repairs. (16380 - Screed Removal Alsager)

Alsager Screeding Related Tasks

Screeding Related Tasks Alsager

There is a range of work that can be conducted by your local Alsager floor screeding company including screeding quotes, domestic floor screeding, structural screeds, wet room floors, floor renovation, final floor finishes, cellar floor screeding, sand screed, thin bed floor screeding, polished screed floors, floor levelling, polished concrete flooring, screeding advice, underfloor heating installations, decorative floor screeding in Alsager, screeded bathroom floors, concrete screeding, external screeding, polished floor screeding, monolithic floor screeding, self-levelling screeding in Alsager, floor screeding tools, floor preparation, smoothing compounds, floor screeding, subfloor repair, professional floor levelling services, commercial screeding, concrete floor toppings in Alsager, latex screed, and lots more floor screeding tasks. These are just a few of the duties that are handled by people specialising in floor screeding. Alsager providers will let you know their full range of services.

Floor Screeding Near Alsager

Also find: Talke Pits floor screeding, Radway Green floor screeding, Oakhanger floor screeding, Thurlwood floor screeding, Chesterton floor screeding, Bignall End floor screeding, Scholar Green floor screeding, Church Lawton floor screeding, Bathomley floor screeding, Talke floor screeding, Betchton floor screeding, Winterley floor screeding, Rode Heath floor screeding and more. Firms who do screeding can be found in practically all of these localities. To deliver top-notch flooring services, these seasoned professionals have the required expertise and skills. With respect to screeding, be it for commercial or residential properties, they ensure that the work is performed to the highest standards. To get quotes for screeding, local householders can simply click here. Why not start your floor screeding project right away?

TOP - Floor Screeding Alsager

Floor Screeding Alsager - Self-Levelling Screeding Alsager - Floor Screed Companies Alsager - Screeding Quotations Alsager - Residential Screeding Alsager - Floor Screeding Services Alsager - Floor Screeders Alsager - Floor Levelling Alsager - Floor Screeder Alsager


(This screeding Alsager page was compiled on 22-05-2024)