Floor Screeding Egham

Egham Screeding & Floor Levelling Services

Floor Screeding Egham Surrey (TW20): When you're renovating your Egham home with damaged or uneven floors, or perhaps converting a cellar or basement to functional living area, a competent floor screeding company should be your first port of call. A screed is used to create a smooth floor on top of a concrete sub-base and give a good base for you final flooring material. If you want your floors to last then a floor screed is one of the most important factors in any renovation or building project.

Free Egham Floor Screeding Quotes


Whatever size room or area you are renovating, a decent screeding company in Egham will supply the expertise and correct working practices to establish a perfect base for your flooring. They will be ready to advise you on the right kind of screed your project requires, and how best to apply and install it.

Floor Screeding Egham Surrey (TW20)

It may be necessary, based on the intended use of the area in question, for a structural engineering survey to conform to building regulations on flex strength, point loadings and load bearing of the screed floor.

The skills and training that a screeding technician brings to your project should guarantee a successful end result and help to prolong the life of your flooring. The correct mixture of screed and the methods used in laying it are also critical to ensure the final intergrity of your floor.

There are a number of screeding contractors in and around Egham so try to get multiple estimates for your project before selecting a company and know to what standard of finish it's for. The price quote could be based on what is called the Surface Regularity, or SR figure. SR2 and SR3 may be less expensive options, although the floor screeding finish may have errors and deviations, whilst SR1 guarantees a perfect finish. This means that you might have to correct any patches that may cause issues when laying your finished flooring material.

Floor Screeders Egham (01784)

British Standards BS8204 sets down the regulations and guidelines that all Egham screeding installers must follow, and if applying specialist screeding solutions, (Flowcrete, Cemfloor, Gypsol etc), they should be accredited by the manufacturers as being trained and skilled in their use. The assessment and training of a screeding contractor by a manufacturer is underlined through this accreditation scheme, and offers assurances of reliability and safe working practices on any project involving their materials.

Egham commercial screeders may be involved in floor screeding in shopping centres, warehouses, hotels, hospitals, schools and factories.


Standard Screeds - A combination of sand and cement which is ideal for everyday domestic usage. This mixture comprises a 5:1 ratio of sand to cement. After laying a standard screed dries out at a rate of 1mm/day.

Liquid or Self-Levelling Screeds - Used to provide a high quality finish, especially in SR1 levels of screeding, by a cement and latex material. It's largely used to provide a clean, smooth floor over a poor quality or damaged substrate and enables all types of flooring materials to be used. Even with a depth of 1mm, the latex polymers within the mixture provide a high strength screed for a wide range of uses.

Polymer Screeds - An extremely high strength solution where a reduced screed thickness is necessary. Maker's guidelines for drying times differ across the various product ranges.

Screeding Quotes Egham Surrey

Industrial and Heavy Duty Screed - A screed designed for heavy traffic and high load areas where the maximum possible durability and strength is crucial.

Fast Drying and Advanced Drying Screeds - As the name suggest, these screeds dry quickly and allow you to use the screeded area much sooner. Drying out at a rate of 3-7mm/day, depending on the mix, they're normally a fibre reinforced type of screed and are great for projects that have tight schedules.

Fibre Reinforced Screed - Used mostly with underfloor heating and is the advised option in these projects. The fibres in the screed mix enhance overall strength and durability while also protecting against thermal cracking and shrinkage. At around one millimetre per day, it has an identical curing rate to standard floor screed.


To enable the screeding to be of a good quality finish that's hard wearing and durable, time must be spent on preparing the area prior to any screed being poured. It's vital that all contaminants such as grease, oil, paint or debris is eliminated from the base before pouring any screed, since these can affect the bonding process that a quality screed needs.

Screeding Near Egham (TW20)

If cleaning products have been used it's important to remove any remnants of soap or detergent, and leave the floor surface to dry naturally. If screeding over a cement or stone floor any cracks should be repaired to prevent them from "travelling" up through a screed layer and producing deviations on the finished surface. During an on-site survey the screeding installer will establish what preparations are necessary before starting to work on the screeding.

Before the screeding can be laid a DPM (damp proof membrane) will have to be installed to protect the final flooring and screed from moisture. The DPM is made of thick polythene and different layers could be used to act as a moisture barrier and air insulating layer for the screeding.

A further air-tight barrier might be necessary if your home is in a location that is known to be susceptible to radon. This could be just a simple air-tight membrane, or in more serious situations a ventilation and extraction system is installed beneath the floor screed to take away any inflow of radon gas from the ground.

Once these stages have been completed the screeders will apply a sealant or primer to the prepared base surface. Primers and sealers assist with the bonding process and are special applications matched to the kind of screed that is being used. These products require certified contractors to apply them in the correct ratios by using bespoke equipment, such as airless sprays.

This is the time that under floor heating can be laid out in the correct manner and installed. The cables and heating pipes are firmly mounted on insulation panels to prevent any movement and ensure that they are positioned correctly. Warmth will be evenly spread across the floor in an expertly installed under floor heating system, and coupled with it being an effective choice of heating, it is an ideal choice for most Egham home renovation projects.

Floor Screed Egham (01784)

Needless to say, if you're not installing underfloor heating, you can just skip this stage and get on with applying the screeding. The specific requirements of the room will dictate the sort of screeding that is used. After the pouring of the screed there's a minimum twenty four hours (for quick drying screeds) before you are able to walk on the surface, and a seventy two hour minimum setting time before any floor covering installation. If you're using heavy duty or standard screeds the setting time is longer and the manufacturer's guidelines must be followed so as to get the best finish for your floor.

The SR level of your screeding can be confirmed once it has hardened enough to be walked upon. Using a 2 metre straight-edge the floor surface is checked for any deviations, ridges and dips in the surface of the screed.

  • SR1 - SR1 is the best level and permits just 3mm of disparity from the straight-edge.
  • SR2 - If the floor deviates from the straight edge by 5 millimetres or less it is classified as SR2 level and is the standard for industrial and commercial floors.
  • SR3 - For other floors where the quality of finish is relatively inconsequential the SR3 is the specification and should have a deviation measurement of 10mm or less.

There might also be a requirement for a qualified structural engineer to do a soundness test. This assessment will establish the strength of the screeded surface and the suitability for its proposed use. A drop hammer test will be conducted on several areas of the screed layer and the outcomes recorded. The specialist testing and measurement tools mean this can only be conducted by a certified structural engineer obeying the guidelines of BS8204. (Tags: Screeding Egham, Floor Screeding Services Egham, Floor Screed Egham, Floor Screeding Egham).

Floor screeding services are available in Egham and also nearby in: Ashford, Wraysbury, Horton, Fordbridge, Stanwell Moor, Brands Hill, East Bedfont, Colnbrook, Harmondsworth, Datchet, Old Windsor, Poyle, Staines-upon-Thames, Stanwell, Lyne, and in these postcodes TW20 8BY, TW20 8JH, TW20 8EA, TW20 8AP, TW20 8EL, TW20 8EH, TW20 8AB, TW20 8JX, TW20 0JP, TW20 8NJ. Locally based Egham floor screeders will likely have the postcode TW20 and the telephone code 01784. Checking this will ensure you are accessing local floor screeding. Egham homeowners are able to utilise these and lots of other related services.

Book a Screeder in Egham UK

Latex Floor Screed Egham

When a certain amount of flexibility is needed in the surface of a floor you may find that the application of a latex screed will be advantageous. Usually coming in two parts, latex screeds comprise a cement-based compound, and a liquid latex additive. The liquid latex solution takes the place of the water that's used in standard screeds, making it more flexible and quicker drying.

Used in the levelling of subfloors, this latex product creates a surface for the laying of the final floor finishes. Providing a smooth, durable surface that is perfect for the application of flooring adhesives, this screeding is is suitable for use on subfloors of sand/cement, asphalt, wood, concrete and quarry tiles. This type of latex screed will provide a flexible, crack-free finish, even if there's movement in your subfloor.

When using a "floating" screed, i.e. when screeding is being laid on the top of underfloor heating, depths of 50mm-75mm may be necessary, and latex flooring screeds aren't suitable for this purpose.

Related Tasks

Screeding Related Tasks Egham

There are a number of different tasks that can be conducted by your local Egham floor screeding company including floating screed Egham, fibre reinforced floor screeding, factory floor screeding, floor screeding, external screeding, domestic screeding, screeding advice in Egham, basement screeding Egham, acoustic flooring solutions, conservatory screeding, waterproof screeding, bonded concrete floor screeding, structural screeds, polished screeding, granolithic screeding in Egham, screed surveys & testing, anhydrite screed, garage screeding, unbonded screed, floor preparation services, lightweight floor screeding in Egham, underfloor heating screeds, floor levelling, damp proof membranes, screed reinforcement Egham, concrete screeding, floor screed testing, flow screeding, and lots more floor screeding tasks. These are just a handful of the activities that are handled by people specialising in floor screeding. Egham providers will inform you of their whole range of screeding services.

Floor Screeding Tools

  • Spiked Roller
  • Gloves
  • Measure
  • Float
  • Straight Edge
  • Trowel
  • Spade
  • Buckets
  • Knee Protection
  • Floor Profile
  • A Long Spirit Level

Floor Screeding Near Egham

Also find: Poyle floor screeding, Colnbrook floor screeding, Lyne floor screeding, Thorpe Lea floor screeding, Stanwell floor screeding, Egham Wick floor screeding, Harmondsworth floor screeding, Stanwell Moor floor screeding, Stroude floor screeding, Brands Hill floor screeding, Fordbridge floor screeding, Horton floor screeding, East Bedfont floor screeding and more.

Floor Screeding Services Egham

Find Floor Screeding in Egham Here
Screeding Services in Egham Surrey (01784)
  • Egham Floor Screeding Advice
  • Egham Fast-Dry Floor Screeding
  • Egham Domestic Floor Screeding
  • Egham Fibre Reinforced Screeding
  • Egham Screeding Services
  • Egham Underfloor Heating Installation
  • Egham Floor Insulation
  • Egham Polished Screed Floors
  • Egham Cheap Screeding
  • Egham Commercial Screeding
  • Egham Floor Damp Proofing
  • Egham Floor Screeding
  • Egham Liquid Screeds
  • Egham Screed Calculator Service

Screeding Around Egham: Floor screeders were recently requested by folks living in Mons Walk, Milton Road, Braywood Avenue, Spring Rise, Coopers Hill Lane, Midway Avenue, Moore Grove Crescent, Woodhaw, Field View, Delta Way, Middle Hill, Eversley Way, Hummer Road, Mead Close, Borrowdale Close, Clockhouse Lane East, Rosemary Lane, Green Lane, Lynwood Avenue, Hurst Lane, Nightingale Shott, Danehurst Close, Village Road, Strode Street, College Avenue, Grange Road, Longside Close, Huntingfield Way and these Egham postcodes: TW20 8BY, TW20 8JH, TW20 8EA, TW20 8AP, TW20 8EL, TW20 8EH, TW20 8AB, TW20 8JX, TW20 0JP, TW20 8NJ. Work was executed in these locations by specialists in floor screeding. Egham home and business owners enjoyed the benefits of competent and top quality screeding services in every case.

Screeding Jobs Egham: Find screeding jobs in Egham by going here: Screeding Jobs Egham

For local Egham information go here

Floor screeding in TW20 area, phone code 01784.

TOP - Floor Screeding Egham


(This screeding Egham content was generated on 17-10-2023)