Floor Screeding Epsom

Epsom Screeding & Floor Levelling Services

Floor Screeding Epsom Surrey (KT17): If you are aiming to install under floor heating, are restoring a property or cellar or have an uneven or damaged floor in your Epsom property, then it's the perfect time to think about bringing in a professional floor screeder. A screed is used to generate a smooth floor on top of a concrete sub-base and give a firm foundation for you final flooring material. If you would like your floors to last then a floor screed is one of the most important factors in any renovation or building project.

Free Epsom Floor Screeding Quotes

FLOOR SCREEDING CONTRACTORS EPSOM

Whatever size room or area you are remodeling, a screeding specialist in Epsom will be able to provide you with the expertise and proper working methods to generate a perfect base for your floor. They will be ready to advise you on the correct type of screed your project requires, and the best methods for applying and installing it.

Floor Screeding Epsom Surrey (KT17)

It may be a requirement, depending on the proposed use of the space, for a structural engineering survey to abide by building regulations on point loadings, flex strength and load bearing of the screed floor.

Bringing in a skilled and highly trained specialist will ensure you get the proper sort of screed for the room's intended usage and get the maximum lifespan out of your flooring. There are numerous types of screeding and selecting the correct mix and laying process is vital to achieve a quality floor which is fit for purpose and durable.

There are a number of screeding specialists in the Epsom area so if possible get multiple quotes for your screeding project before picking a company and know to what standard of finish it's for. The quote might be based on what is called the SR, or Surface Regularity number. SR2 and SR3 may be more affordable options, however the finished floor surface could have deviations and errors, whilst SR1 guarantees a perfect finish. An SR2 or SR3 level could mean there will be ridges or flat spots that could cause problems when putting down your final flooring materials.

Floor Screeders Epsom (01372)

British Standards BS8204 lays out the guidelines and regulations that all Epsom screeding companies are required to follow, and if applying specialist screeding solutions, (Cemfloor, Flowcrete, Gypsol etc), they should be approved by the manufacturers as being trained and skilled in their use. A company holding such accreditations demonstrates they have been assessed and trained in the use of these products and can deliver a top notch service in all areas of their installation.

For the screeding of floors in warehouses, salons, schools, hospitals, shopping centres and factories, specialist Epsom commercial screeders will be needed.

TYPES OF SCREED

Standard Screeds - A mix of sand and cement which is perfect for regular residential use. Five parts sand to one part cement is the usual mixture for standard screed. The standard flooring screed will dry at a rate of 1mm thickness each day.

Fibre Reinforced Screed - The favoured choice by professional contractors for use with under floor heating systems. The increased flex and strength provided by the fibres within the screed mix help protect the resulting floor from shrinkage and cracking due to heat. The screed will dry out at a rate of 1mm/day.

Polymer Screeds - When a decreased thickness of floor is needed due to building requirements, a polymer screed offers an extremely high strength resolution to the situation. The setting times vary according to product guidelines.

Fast Drying and Advanced Drying Screeds - If you have to progress urgently with the flooring due to time limitations, this screed dries more speedily than standard flooring screeds. Drying out at a rate of 3-7mm/day, subject to the mixture, they're normally a fibre reinforced type of screed and are ideal for projects that have tight schedules.

Screeding Quotes Epsom Surrey

Liquid or Self-Levelling Screeds - When the highest possible standard of finish is necessary this compound of latex and cement is employed to produce SR1 quality floor screeding. This is largely used to provide a smooth, clean floor over a poor quality or damaged substrate and results in a surface onto which all types of flooring materials can be laid. Even with a depth of only one millimetre, the latex polymers within the screed provide a high strength surface for a wide range of uses.

Industrial and Heavy Duty Screed - Made for maximum durability and strength in areas where traffic is expected to be high or specific loading of the floor is needed.

SCREEDING PREPARATION AND INSTALLATION

Preparation is crucial for a quality finished screed surface that will be hard wearing and durable. It's vital that all contaminants such as paint, grease, oil or loose debris is removed from the floor surface before pouring any screed, because these can affect the adhesion capability that a quality screed demands.

Screeding Near Epsom (KT17)

Any cleansing chemicals which are used during this phase shouldn't leave any residues, and the floor surface must be permitted to dry by itself naturally. If screeding over a cement or stone floor all cracks should be repaired to prevent them from "travelling" through a screed layer and causing imperfections on the finished floor surface. During a site survey your Epsom screeding company will notice what preparation work is necessary before any actual screeding starts.

To protect the screeding layer and flooring materials from moisture rising up from the ground, a damp proof membrane (DPM) will have to be laid. The DPM is made of thick polythene sheeting and different layers may be used to act as a moisture barrier and air insulating layer for the screeding.

An additional airtight barrier could be needed if your house is in a location which is regarded as susceptible to radon gas emissions. An airtight membrane may be sufficient in places with relatively low emissions of radon, however in more serious cases there might have to be a more sophisticated extraction system to remove any ground penetrating radon gas.

As soon as these steps have been taken the screeders will apply a sealant or primer to the prepared base. These sealers and primers will make sure the screed bonds perfectly to the base surface and help accomplish a quality finished floor. Because of their specialist nature, only skilled screeders in Epsom should be entrusted with using them correctly, safely and through the use of equipment that's made for this task.

Before the screeding is laid, any under floor heating will now set out and installed. The underfloor heating system is laid out in the correct pattern and firmly secured to insulation panels to prevent potential movement during screed pouring. When skillfully installed an under floor heating system is an excellent way to warm a room and top quality screeding will retain its heat, generating an even level of warmth across the floor surface.

Floor Screed Epsom (01372)

If you aren't installing under floor heating the screed can now be prepared in situ and poured. The particular requirements of the room will determine the kind of screeding used. For quick drying and advanced screeds there'll be at least a 24 hour delay before it can be walked on, and a further Three days minimum before any flooring material can be laid over it. If you are using standard or heavy duty screeds the setting time is longer and you should observe the manufacturer's guidelines in order to get the best possible finish to your floor.

You can check the SR level of the completed screeding as soon as it is set enough for walking on. Using a 2 metre straight-edge the surface is examined for any deviations, dips and ridges in the surface of the screed.

  • SR1 - Over the entire area, if there are no disparities of more than 3mm from the straight-edge, then you have a top quality SR1 level surface.
  • SR2 - The standard flooring in industrial and commercial builds is classed as SR2 and has a maximum deviation of 5 millimetres across the whole screeded surface.
  • SR3 - For other floors where the finish is relatively immaterial SR3 is the classification and has a deviation measurement of 10 millimetres or less.

If your screed has been installed with specific loading in mind then a structural engineer will be necessary to perform these soundness tests. The assessment will make certain that your new screed is viable for the load point requirements set down in the site survey. The screed should be subjected to a drop hammer test to gauge strength and flexibility at specific points. Any screed floor that's got point load requirements must be approved by a trained structural engineer heeding the BS8204 guidelines. (Tags: Floor Screed Epsom, Screeding Epsom, Floor Screeding Epsom, Floor Screeding Services Epsom).


Floor screeding services are available in Epsom and also nearby in: Belmont, West Ewell, Langley Vale, Cheam, Carshalton, East Ewell, Chessington, Tattenham Corner, Nork, Esher, Banstead, Sutton, Worcester Park, Leatherhead, Burgh Heath, Ashtead, Oxshott, and in these postcodes KT17 1DG, KT17 1WR, KT17 2ET, KT17 1EZ, KT17 1AA, KT17 1LQ, KT17 2BX, KT17 1EQ, KT17 1BX, KT17 1XP. Locally based Epsom floor screeders will most likely have the postcode KT17 and the phone code 01372. Verifying this will ensure you access locally based screeding. Epsom homeowners can benefit from these and numerous other building related services.

Book a Screeder in Epsom UK

Latex Floor Screed Epsom

When the make-up of your floor's surface means that a bit of flexibility is needed, it may be advantageous to use a latex floor screed, rather than one with a more rigid finish. Latex screeds typically comprise 2 parts - a cement-based smoothing compound, and a liquid latex component. Latex screeds are more flexible and quicker drying than other types of screed, because the water which is normally used is substituted with the liquid latex.

Used for levelling-out sub-floors, this latex compound creates a suitable surface for the installation of your chosen floor finishes. This screeding is suitable for substrate made of asphalt, concrete, wood, stone tiles or sand/cement, is ideal for the application of adhesives and gives a resilient and smooth surface. This latex screed will give you a flexible, crack-free finish, even if there's movement in your subfloor.

When installing a "floating" screed, i.e. when an unbonded screed is being laid over a membrane of thermal or acoustic insulation, thicknesses of 50mm-65mm may be needed, and latex screeds aren't suitable for this purpose.

Related Tasks

Screeding Related Tasks Epsom

There are a wide range of tasks that can be accomplished by your local Epsom floor screeding company including polished screeding in Epsom, floor insulation, screed flooring, floor preparation services, fibre reinforced screeding, unbonded screed in Epsom, floor levelling, floor screed repairs in Epsom, latex floor screeding Epsom, bonded screed Epsom, substrate floor preparation Epsom, floor repairs, office floor screeding, damp proof membranes in Epsom, conservatory screeding Epsom, industrial screeding, domestic screeding, waterproof floor screeding Epsom, floor screeding advice, cellar floor screeding, bonded concrete floor screeding, underfloor heating installations, polished screed flooring, shop floor screeding, rapid strength screeds, and lots more floor screeding tasks. These are just a handful of the duties that are conducted by those specialising in floor screeding. Epsom professionals will be happy to inform you of their full range of floor screeding services.

EPSOM FLOOR SCREEDING QUOTES (KT17)

Floor Screeding Near Epsom

Also find: Worcester Park floor screeding, Burgh Heath floor screeding, Cheam floor screeding, Nork floor screeding, Banstead floor screeding, Sutton floor screeding, West Ewell floor screeding, Belmont floor screeding, Langley Vale floor screeding, Carshalton floor screeding, East Ewell floor screeding, Ashtead floor screeding, Leatherhead floor screeding, Esher floor screeding, Chessington floor screeding, Oxshott floor screeding, Tattenham Corner screeding services and more. All of these locations are serviced by companies who do floor screeding. Epsom householders can get estimates by clicking here.

Floor Screeding Services Epsom

Find Floor Screeding in Epsom Here
Screeding Services in Epsom Surrey (01372)
  • Epsom Floor Screeding
  • Epsom Polished Screed Floors
  • Epsom Floor Levelling
  • Epsom Floor Screeding Advice
  • Epsom Screeding Services
  • Epsom Fibre Reinforced Screeding
  • Epsom Commercial Floor Screeding
  • Epsom Underfloor Heating Installations
  • Epsom Fast-Dry Screeding
  • Epsom Floor Damp Proofing
  • Epsom Cheap Screeding
  • Epsom Floor Insulation
  • Epsom Liquid Screeds
  • Epsom Screed Calculator Service

Screeding Around Epsom: In the previous year screeded floors had been installed in the following Epsom streets: Birches Close, Christchurch Gardens, St Martins Close, Bluegates, Anderson Close, Beech Grove, The Headway, Bahram Road, Derby Close, Cullerne Close, Station Avenue, Scott Close, Carpenter Close, The Drive, Shaw Close, Derby Stables Road, Cherry Way, Blenheim Road, Shepherds Walk, Scotts Farm Road, Dudley Grove, Somerset Close, Brook Mead, South Street, St Martins Avenue, Chanton Drive, The Glade, Carnforth Close, Alexandra Road, and in these Surrey postcodes: KT17 1DG, KT17 1WR, KT17 2ET, KT17 1EZ, KT17 1AA, KT17 1LQ, KT17 2BX, KT17 1EQ, KT17 1BX, KT17 1XP. Work was completed in these locations by experts in screeding. Epsom householders enjoyed the benefits of dependable and professional screeding services in every case.

If you would like to get local information about Epsom, Surrey check here

Screeding Jobs Epsom: Get floor screeding jobs near Epsom here: Screeding Jobs Epsom

Floor screeding in KT17 area, (dialling code 01372).

TOP - Floor Screeding Epsom

Screeding Estimates Epsom - Quick-Dry Screeding Epsom - KT17 - Screeders Epsom - Floor Levelling Epsom - Floor Screeder Epsom - Screeding Epsom - 01372 - Domestic Screeding Epsom

HOME - FLOOR SCREEDING UK

(This screeding Epsom page was generated by Stephen Locke 11-05-2022)