Floor Screeding Blantyre

Blantyre Screeding & Floor Levelling Services

Floor Screeding Blantyre Scotland (G72): When you are renovating your Blantyre property with uneven or damaged floors, or maybe converting a cellar or basement to useable living area, an established floor screeding specialist will be able to help with your home improvements. Floor screeding delivers a smooth finish to a basic sub-base floor, and will allow you to lay your final layer of flooring material, (carpets, boards, tiles etc) over the top of it. The screeding is an important process to ensure a high quality and durable finish to the whole floor structure.

Free Blantyre Floor Screeding Quotes


It doesn't matter how large or small the room is that you need to be levelled, a trustworthy floor screeding specialist in Blantyre will have the appropriate equipment, knowledge and expertise to give you a superb level of service. They'll assess the project and verify the correct sort of screed you need and the best technique for applying it.

Floor Screeding Blantyre Scotland (G72)

They will also assess if a structural engineer is required to make sure any load requirements, flex strength and point loadings are satisfied as set out in building and construction regulations.

Bringing in a skilled and qualified contractor will ensure that you get the appropriate kind of screed for the room's intended purpose and get the optimum lifespan out of your flooring. Picking the right screeding materials and the method of installation is crucial if you want to finish up with a durable and quality finish for your floor.

Ensure that you get more than one quotation for your Blantyre based floor screeding project and also ask to what standard you're getting each quote. The estimate could be based on what's known as the Surface Regularity, or SR number. SR1 is the best quality, and whilst SR2 and SR3 might seem less costly at first glance, they do not guarantee a totally flat or even floor surface. This could mean that you may need to rectify any patches that might cause issues when putting down your finished flooring solution.

Floor Screeders Blantyre (01698)

The guidelines and regulations laid down in the British Standards BS8204 have to be observed by any Blantyre floor screeding contractor and they must also hold accreditation with the manufacturers of specialist screeding materials (Cemfloor, Gypsol, Flowcrete etc.) to substantiate their competence and safe working practices. This accreditation scheme showcases a company's ability and training in the use of a manufacturer's merchandise.

For larger screeding projects in salons, shopping centres, hospitals, schools, warehouses and factories, specialist commercial screeders in Blantyre will be needed.


Standard Screeds - This is okay for normal residential use and comprises a blend of cement and sand. This mix uses a five to one ratio of sand to cement. Once its been laid this 5:1 ratio will dry at a rate of one millimetre each day.

Fast Drying and Advanced Drying Screeds - As the name suggest, this screed dries quickly and allows you to use the floor area much sooner. Most of the fast drying screeds are fibre reinforced and are ideal for a whole host of flooring projects where the speedier curing rate of 3-7mm/day is a big advantage.

Screeding Quotes Blantyre Scotland

Industrial and Heavy Duty Screed - Where levels of traffic are high or heavy loading on the floor is required, heavy duty screeds offer maximum durability and strength.

Self-Levelling or Liquid Screeds - Used to produce a high quality finish, especially in SR1 levels of screeding, by a cement and latex material. This is primarily needed to produce a high quality floor over the top of a poor quality or damaged substrate and results in a surface onto which all forms of flooring materials can be laid. They can be as little as 1mm thick, and thanks to the latex polymers, will still provide a high strength finish.

Polymer Screeds - An extremely high strength flooring solution where a reduced screed thickness is essential. Polymer screeds are made by a number of screed manufacturers and on account of their different chemical compositions have distinct setting times for each product.

Fibre Reinforced Screed - Used mostly with underfloor heating systems and is the advised choice in such projects. The fibres in this screed enhance overall strength and durability whilst also safeguarding against thermal shrinkage and cracking. The screed will set hard at a rate of roughly 1mm/day.


Screeding companies will need to prepare the area before proceeding with any other work so as to guarantee a hard wearing and quality screed flooring. The original floor surface should be cleaned to eradicate any grease, debris, oil and paint which can affect the bond of the screeding.

Screeding Near Blantyre (G72)

Any cleansing chemicals used in this process shouldn't leave any residues, and the floor base must be allowed to dry by itself naturally. It is vital to repair any crevices or cracks in the floor surface to prevent them being mirrored and "travelling" up into your newly screeded floor. An on-site survey will enable your Blantyre screeding installer to highlight these preparation areas and complete them before commencing to pour the screeding layer.

To protect the flooring materials and screeding layer from moisture rising up through the ground, a damp proof membrane (DPM) will have to be installed. There might be 2 or 3 layers of different thickness polythene to act as barriers between the insulation layer and screed.

If the area is susceptible to radon gas then one additional barrier is essential to prevent the gas from entering via the ground. This can be as simple as an airtight membrane, or in severe cases a ventilation and extraction system will be installed beneath the screed to extract any influx of radon gas from ground level.

The final step of the surface preparation process is the spraying or painting of a sealer or primer. These sealers and primers will make certain that the screed bonds perfectly to the base surface and help achieve a top quality finished floor. Because of their specialist nature, only certified screeding contractors in Blantyre should be entrusted with using them safely and correctly and using equipment that's made for the task.

This is the time that underfloor heating can be installed and laid out in the correct manner. The under floor heating system will be carefully positioned and attached firmly to insulation panels to avoid potential movement during screed pouring process. Warmth is evenly spread across a floor area in a professionally installed underfloor heating system, and in conjunction with it being an efficient choice of heating, it's a great choice for many Blantyre renovation projects.

Floor Screed Blantyre (01698)

The screed can now be mixed and prepared in situ and poured onto the floor base. Your intended use of the room will help your screeding specialist on which kind of floor screed is appropriate for your needs. For quick drying screeds there will be at least twenty four hours delay before it can be walked over, and a further seventy two hours minimum before any flooring material can be laid over it. If you are looking to wind up with a nicely finished and hard-wearing floor surface you must follow the manufacturer's guidelines with regards to standard and heavy duty screeds where the waiting period will be longer.

As soon as the screed has hardened it can be checked for quality to verify its SR standard. The basic SR test involves the use of a 2 metre long straight-edge to check for any fluctuations in the screed surface.

  • SR1 - Deviations of three millimetres or less as measured over the whole area shows your screed floor to be of the finest quality and is categorised as SR1.
  • SR2 - SR2 is for standard industrial and commercial floors and can deviate from the straight-edge by up to five millimetres.
  • SR3 - For other floors where the finish is comparatively immaterial SR3 is the specification and has a maximum deviation measurement of ten millimetres or less.

If your screeding has been installed with particular load bearing requirements in mind then a qualified structural engineer will be needed to carry out the tests. The assessment will make sure that your new screeded surface is viable for the load point requirements specified in the original site survey. The screed layer could be given what's known as a drop hammer test to gauge flexibility and strength in distinct areas. The specialist measurement and testing tools mean this can only be conducted by a certified structural engineer observing the guidelines of the British Standards BS8204. (Tags: Screeding Blantyre, Floor Screeding Services Blantyre, Floor Screed Blantyre, Floor Screeding Blantyre).

Floor screeding services are available in Blantyre and also nearby in: Bargeddie, Rutherend, Shawtonhill, Hamilton, Cambuslang, Uddingston, Baillieston, Bothwell, Bellshill, Flemington, Nerston, East Kilbride, Parkhead, Viewpark, Greenfield, and in these postcodes G72 0AU, G72 0AG, G72 0DX, G72 0GR, G72 0GW, G72 0LS, G72 0QA, G72 0EA, G72 0HY, G72 0JQ. Locally based Blantyre floor screeders will probably have the postcode G72 and the dialling code 01698. Verifying this can confirm that you are accessing local floor screeding. Blantyre homeowners are able to benefit from these and various other flooring related services.

Book a Screeder in Blantyre UK

Latex Screed Blantyre

It is best to use a latex screeding when a bit of flexibility is necessary in a floor's surface. Latex screeds come in 2 parts - a bottle and a bag - with a bottle that contains liquid latex, and a bag that contains a cemetitious powder. The liquid latex part replaces the water which would normally be used in a screed mix, and is quicker drying and much more flexible than other types of screed.

This latex screed is used to level-out a sub-floor prior to the final decorative surface being laid. Suitable for sub-floors of wood, asphalt, stone tiles, concrete and sand/cement, this gives the ideal surface for the application of flooring adhesives which is also smooth and durable. This type of latex screeding will provide a flexible, crack-free finish, even if there is movement in your sub-floor.

When using a "floating" screed, i.e. when a screed is being laid on the top of a membrane of acoustic or thermal insulation, thicknesses of 50mm-65mm may be required, and latex screeds aren't suited to this purpose. (Tags: Latex Floor Screed Blantyre, Latex Screeding Blantyre, Latex Screeds Blantyre, Latex Screed Blantyre).

Related Tasks

Screeding Related Tasks Blantyre

There are a wide array of tasks that can be carried out by your local Blantyre floor screeding specialist including self-levelling floor screeding, latex floor screeding, screed testing & surveys, external screeding in Blantyre, final floor finishes, polished screed flooring, floor screeding tools, sand and cement screeds, basement screeding Blantyre, acoustic flooring solutions Blantyre, screed flooring, cheap screeding, school floor screeding Blantyre, commercial floor screeding Blantyre, floating screed, shop screeding, sand screed, concrete pumping Blantyre, underfloor heating screeds, screed reinforcement, bonded concrete screeding in Blantyre, polished screeding, liquid screeds, floor preparation services, floor insulation, rapid strength screeding, residential screeding in Blantyre, concrete screed Blantyre, and more floor screeding tasks. Listed are just a selection of the activities that are performed by those specialising in screeding. Blantyre professionals will let you know their whole range of screeding services.


Floor Screeding Near Blantyre

Also find: Cambuslang floor screeding, Uddingston floor screeding, Rutherend floor screeding, Bothwell floor screeding, Baillieston floor screeding, Greenfield floor screeding, Bellshill floor screeding, East Kilbride floor screeding, Hamilton floor screeding, Nerston floor screeding, Flemington floor screeding, Viewpark floor screeding, Parkhead floor screeding, Shawtonhill floor screeding, Bargeddie screeding services and more. All of these towns and villages are covered by companies who do floor screeding. Blantyre homeowners can get quotations by clicking here.

Floor Screeding Services Blantyre

Find Floor Screeding in Blantyre Here
Screeding Services in Blantyre Scotland (01698)
  • Blantyre Floor Insulation
  • Blantyre Commercial Screeding
  • Blantyre Polished Screed Floors
  • Blantyre Floor Levelling
  • Blantyre Fast-Dry Floor Screeding
  • Blantyre Cheap Floor Screeding
  • Blantyre Underfloor Heating Installations
  • Blantyre Floor Damp Proofing
  • Blantyre Floor Screeding Advice
  • Blantyre Screed Calculator Service
  • Blantyre Domestic Floor Screeding
  • Blantyre Liquid Screeds
  • Blantyre Fibre Reinforced Screeding
  • Blantyre Screeding Services

Screeding Around Blantyre: In the last twelve months screeded floors were professionally installed in these Blantyre streets: Manse View, Victoria Street, Ashley Place, Barry Gardens, Ardgour Court, Forrest Street, Park Crescent, Morven Lane, Viewfield Avenue, Lively Place, Etterick Wynd, Parkneuk Road, Logan Street, Kintyre Road, Crail Close, Buller Crescent, Aldersyde Place, Anderson Gardens, Madison Path, Glamis Lane, Lime Grove, Hardie Street, Oaklea Crescent, Mossbank, Elie Road, Bellsfield Drive, Aberdour Court, Valerio Court, Jedburgh Street, Cedar Place, and in these Scotland postcodes: G72 0AU, G72 0AG, G72 0DX, G72 0GR, G72 0GW, G72 0LS, G72 0QA, G72 0EA, G72 0HY, G72 0JQ. Work was conducted in these locations by experts in screeding. Blantyre home and property owners received dependable and top quality floor screeding services.

If you're interested in local Blantyre information take a look here

Floor screeding in G72 area, telephone code 01698.

TOP - Floor Screeding Blantyre

Screeders Blantyre - Floor Levelling Blantyre - Industrial Screeding Blantyre - Screeder Blantyre - Floor Screeding Contractors Blantyre - 01698 - Floor Screeding Quotes Blantyre - Domestic Screeding Blantyre - Screeding Services Blantyre


(This screeding Blantyre page was written on 08-09-2022)