Floor Screeding Birtley

Birtley Screeding & Floor Levelling Services

Floor Screeding Birtley Tyne and Wear (DH3): A professional floor screeding company can help to install under floor heating, level a damaged or uneven floor or help with renovations on your Birtley home, when necessary. Allowing you to lay your final layer of flooring material, (carpets, boards, tiles etc) over it, floor screeding provides a smooth finish to a basic sub-base. If you want your floors to last a long time then floor screeding is the most important factor in any renovation or building project.

Free Birtley Floor Screeding Quotes


A reputable floor screeding company in Birtley will have knowledge and experience to help you achieve a perfectly finished floor in whatever shape or size of room you are renovating. Once your project has been carefully evaluated, they'll be in a position to inform you of the correct form of screed your project needs, and the best methods for applying and installing it.

Floor Screeding Birtley Tyne and Wear (DH3)

They will also assess if a structural engineer is needed to make certain any flex strength, point loadings and load bearing are satisfied as laid down in construction and building regulations.

A qualified and skilled work force is imperative for a successful outcome and will extend your floor's lifespan through the use of the correct kind of screed for the intended purpose of your room. There are many different kinds of floor screed and choosing the appropriate mix and installation approach is critical if you are to achieve a quality floor that is fit for purpose and long-lasting.

Before deciding upon a screeding contractor from the many based in the Birtley area, ask to what standard of finish they're basing their quotation, and also make certain that you get multiple quotes. The Surface Regularity (SR) finish is the number to watch out for when receiving a quote from Birtley floor screeding contractors. SR1 is the highest standard, and while SR2 and SR3 may seem more cost-effective at first glance, they do not guarantee a totally even or flat floor surface. Any errors in the final screeding can cause problems in laying flooring due to indentations, flat spots, ridges in the surface.

Floor Screeders Birtley (0191)

All Birtley screeding installers have to adhere to British Standards (BS8204) and ought to have some form of accreditation from the manufacturers of specialised screeding equipment and materials, for instance Cemfloor, Gypsol, Flowcrete. A contractor holding accreditations demonstrates they've been assessed and trained in using these products and can provide a high standard of service in all aspects of their installation.

Birtley commercial screeders could be involved in screeding floors in pubs, shopping centres, warehouses, hospitals, schools and factories.


Standard Screeds - Frequently used in residential projects where the mixture of sand and cement is perfectly acceptable for everyday footfall usage. The ratios involved in standard screeds are 5 parts sand to 1 part cement. Once laid this 5:1 ratio will dry at a rate of one millimetre per day.

Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading of the floor is required, heavy duty screeds provide maximum strength and durability.

Self-Levelling or Liquid Screeds - When the highest possible standard of finish is necessary this mixture of cement and latex is used to achieve SR1 quality screeding. Mainly used to improve a damaged floor or poor substrate level so as to lay a new flooring surface, like tiling over it. Even with a depth of only 1mm, the latex polymers within the screed provide a high strength surface for a wide variety of uses.

Screeding Quotes Birtley Tyne and Wear

Polymer Screeds - An extremely high strength flooring solution where a reduced thickness is necessary. The drying times vary as outlined by proprietary product guidelines.

Fibre Reinforced Screed - The professional's choice for residential use on top of underfloor heating. This is because of the increased durability and protection against thermal shrinkage and cracking provided by the fibres within the screed mix. At about one millimetre per day, it has a similar setting rate to standard floor screed.

Fast Drying and Advanced Drying Screeds - If there is a need to move forward urgently with the work owing to time constraints, this screed dries more speedily than standard flooring screeds. They are normally a fibre reinforced kind of screed which can dry at a rate of between 3-7mm per day and are employed in time critical projects.


To ensure that the screeding is of a good quality finish that is hard wearing and durable, time should be devoted to fully preparing the area before any screed is laid. It's important that all contaminants such as grease, paint, loose debris or oil is removed from the floor before laying any screed, because these can affect the adhesion capability that a good quality floor screed requires.

Screeding Near Birtley (DH3)

If any products are used during this stage it's important to make sure that no residues of detergents, soaps or other cleaning products are left on the floor surface and it is permitted to dry out naturally. At this stage cracks need to be repaired since these can travel up through the laid screed and be reflected in the finished surface. A site survey will allow your Birtley screeding company to pinpoint this preparation work and finish it before starting to lay the screeding.

Before the screeding can be laid a damp proof membrane (DPM) will have to be installed to shield the screed and final flooring from moisture damage. There may be 2 or 3 layers of different thickness polythene to act as barriers between the screed and the insulation layer.

If your home is located in a place where radon is found an extra barrier layer is necessary to prevent radon gas from seeping through. An air-tight membrane may be sufficient in locations with relatively low radon measurements, however in more serious cases there may need to be a more complicated ventilation and extraction system to block any ground penetrating radon.

Once the base has been prepared and all DPMs installed, a primer or sealant is then put on. These primers and sealers will ensure the screed bonds successfully to the base surface and help achieve a quality finished floor. These substances need qualified contractors to apply them in the correct ratios by using custom-made equipment, such as airless sprays.

This is the time that under floor heating can be laid out in the correct manner and installed. The heating pipes and cabling are securely attached to insulation panels to prevent any movement and make certain they're laid in the correct position. Underfloor heating is one of the most efficient ways to heat a room and a properly installed system will deliver even level of warmth in all areas of the floor.

Floor Screed Birtley (0191)

If you're not installing under floor heating the screed will now be mixed and prepared on site and laid. The specific requirements of the room will dictate the type of screeding used. For advanced and quick drying screeds there'll be at least a 24 hour delay before it is able to be walked over, and a further seventy two hours minimum before you are able to lay any flooring materials. Such timescales will be longer for standard and heavy duty screeds and the manufacture's guidelines must be followed to produce the optimum finish and durability of the floor.

You can evaluate the SR standard of the finished screed as soon as it is set enough for walking on. The basic SR test uses a 2 mtr straight edge to check for any fluctuations in the screeded surface.

  • SR1 - SR1 is the highest standard and permits just three millimetres of disparity from the straight-edge.
  • SR2 - SR2 is the classification for normal standard industrial and commercial floors and can deviate from the straight-edge by up to five millimetres.
  • SR3 - If the deviation around the room is 10mm or less the screed quality is categorised as SR3 and is the standard required for garage and utility areas.

It might also be necessary for a qualified structural engineer to carry out a soundness test. The assessment will make sure that your new screeding is suitable for the load point requirements set down in the original site survey. This can include what is known as a drop hammer test which assesses various aspects of the flexibility and strength of the screed. Only certified structural engineers heeding the BS8204 guidelines are allowed to conduct such testing and sign off on the structural integrity of the screeding. (Tags: Floor Screed Birtley, Floor Screeding Services Birtley, Screeding Birtley, Floor Screeding Birtley).

Floor screeding services are available in Birtley and also in: High Flatts, Usworth, Fatfield, Crowther, Biddick, Chester le Street, Rickleton, Eighton Banks, Harraton, Kibblesworth, Picktree, Armstrong, Low Urpeth, Lambton, and in these postcodes DH3 1PW, DH3 1EH, DH3 1BA, DH3 1FF, DH3 1GF, DH3 1HL, DH3 1RD, DH3 1QJ, DH3 1DL, DH3 1AD. Locally based Birtley floor screeders will most likely have the phone code 0191 and the postcode DH3. Verifying this will confirm that you access local screeding. Birtley property owners will be able to utilise these and lots of other building related services.

Book a Screeder in Birtley UK

Coming Shortly:

Polished screeds Birtley.

Related Tasks

Screeding Related Tasks Birtley

There are a whole host of tasks that can be undertaken by your local Birtley floor screeder including floor insulation, fast drying or accelerated floor screeds, coloured floor screeding Birtley, self-levelling floor screeding Birtley, bonded screed in Birtley, damp proof membranes, decorative floor screeding Birtley, basement floor screeding, lightweight floor screeding, latex floor screed, resin floor screeding Birtley, flow screeding Birtley, floor preparation, anhydrite floor screed, screeding advice, floor levelling Birtley, thin bed floor screeding Birtley, sand and cement screeds Birtley, granolithic floor screed, hospital floor screeding in Birtley, polished floor screeding in Birtley, final floor finishes Birtley, sand screed in Birtley, acoustic flooring Birtley, waterproof floor screeding, rapid strength floor screeding, floor restoration in Birtley, professional floor levelling services in Birtley, liquid screeding, screed reinforcement, residential screeding, screeded bathroom floors, and lots more floor screeding tasks. These are just a small portion of the tasks that are performed by people specialising in floor screeding. Birtley specialists will tell you about their full range of floor screeding services.

Birtley Skip Hire Services

Skip Hire Birtley

There is probably going to be quite a lot of waste produced whenever you are carrying out any type of home improvements or property revamps in Birtley. Your particular floor screeding project may create hardly any waste, and there again it could result in a lot. If the tradesman you use doesn't deal with waste removal, and it hasn't been included on your quote, this is something that you are going to have to deal with.

When there's quite a lot of waste, most people in Birtley opt to hire a skip. No matter what quantity of rubbish is involved, there will be a perfect skip size available. You can select from a mini-skip (2-3 yrds), a midi-skip (4-5 yds), a builders skip (6-8 yds), or a roll-on-roll-off skip (20-25 yds), or you can even go with a skip bag.

If you would like to find out how much it costs to hire a skip in Birtley CLICK HERE.


Floor Screeding Near Birtley

Also find: Lambton floor screeding, Biddick floor screeding, High Flatts floor screeding, Picktree floor screeding, Harraton floor screeding, Rickleton floor screeding, Armstrong floor screeding, Chester le Street floor screeding, Fatfield floor screeding, Low Urpeth floor screeding, Usworth floor screeding, Kibblesworth floor screeding, Crowther floor screeding, Eighton Banks screeding services and more. Most of these villages and towns are catered for by companies who do floor screeding. Birtley home and property owners can get estimates by clicking here.

Floor Screeding Services Birtley

Find Floor Screeding in Birtley Here
Screeding Services in Birtley Tyne and Wear (0191)
  • Birtley Fast-Dry Floor Screeding
  • Birtley Screeding Advice
  • Birtley Structural Screeds
  • Birtley Residential Floor Screeding
  • Birtley Decorative Floor Screeding
  • Birtley Screeding Services
  • Birtley Polished Screed Floors
  • Birtley Floor Screeding
  • Birtley Floor Levelling
  • Birtley Floor Insulation
  • Birtley Cheap Screeding
  • Birtley Screed Calculator Service
  • Birtley Fibre Reinforced Floor Screeding
  • Birtley Liquid Screeds

Screeding Around Birtley: Property owners living in the following areas have just recently requested floor screeding services - Portmeads Road, The Drive, Selkirk Crescent, Durham Road, Crathie, Mount Ridge, Cheshire Avenue, Bertram Street, Pembroke Avenue, Glamis Villas, Hillside, Fell Close, Wilson Avenue, Constables Garth, Windsor Road, Jones Street, Kateregina, Bedford Avenue, Devon Crescent, Athlone Place, Western Highway, Portree Close, Sunderland Highway, Ennerdale, Rosslyn Place, Coniston, Newcastle Bank, Morris Street, as well as these local Birtley postcodes: DH3 1PW, DH3 1EH, DH3 1BA, DH3 1FF, DH3 1GF, DH3 1HL, DH3 1RD, DH3 1QJ, DH3 1DL, DH3 1AD. These places recently saw activity by specialists in screeding. Birtley property owners benefited from dependable and professional screeding services in all cases.

Screeding Jobs Birtley: Browse floor screeding jobs in Birtley by clicking here: Birtley Screeding Jobs

If you need local Birtley info check here

Floor screeding in DH3 area, telephone code 0191.

TOP - Floor Screeding Birtley

Floor Screeders Birtley - Self-Levelling Screeding Birtley - Screeding Birtley - Floor Screeding Quotes Birtley - Screeding Services Birtley - Floor Screeding Companies Birtley - Floor Screeding Near Me - Floor Levelling Birtley - Floor Screeding Birtley


(This screeding Birtley content was compiled on 16-01-2023)