Floor Screeding Polegate

Polegate Screeding & Floor Levelling Services

Floor Screeding Polegate East Sussex (BN26): If you are planning to install under floor heating, have an uneven or damaged floor or are renovating a property or cellar in your Polegate property, it is time to think about contacting a floor screeding professional. A screed is used to create a smooth floor surface on top of a rough concrete sub-base and give a solid foundation for you final flooring material. If you want your floors to last then floor screeding is the most important factor in any renovation or building project.

Free Polegate Floor Screeding Quotes


It doesn't matter how large or small the room you need to be levelled, an established floor screeding company in Polegate will have the necessary equipment, skills and know-how to give you a superb level of service. They will be ready to advise you about the right sort of screed your project requires, and how best to apply and install it.

Floor Screeding Polegate East Sussex (BN26)

They will additionally assess if a structural engineer is required to make sure that any point loadings, load requirements and flex strength are satisfied in accordance with building and construction regulations.

A skilled and qualified work force is imperative for a successful outcome and will extend the life of your floor through the use of the correct form of screed for the intended purpose of your room. Choosing the right screeding materials and the best installation technique is crucial if you want to finish up with a durable and quality finish for your floor surface.

There are several screeding specialists in and around Polegate so try to get multiple quotations for your screeding project before picking out a company and know to what standard of finish is it for. The Surface Regularity (SR) finish is the number to keep your eye on when getting an estimate from Polegate screeding companies. Each of the three SR levels provide different standards of finish, with SR1 offering the highest, with the smallest amount of deviation over the area of the floor. This means that you may need to rectify any patches that might cause issues when laying your finished flooring solution.

Floor Screeders Polegate (01323)

The rules and regulations laid down in the British Standards BS8204 must be followed by any Polegate floor screeding contractor and they must also hold accreditation with the manufacturers of any specialist screeding materials (Flowcrete, Cemfloor, Gypsol etc.) to prove their safe working practices and competence. The assessment and training of a floor screeding contractor by a manufacturer is highlighted through the accreditation scheme, and gives assurances of reliability and safe working practices on any flooring project involving their materials.

Polegate commercial screeders might be involved in screeding floors in factories, warehouses, schools, shops, restaurants and hospitals.


Standard Screeds - Used in domestic flooring projects where the mix of cement and sand is good for regular floor traffic usage. 5 parts sand to 1 part cement is the usual mix for standard screeds. This five to one ratio standard flooring screed will dry out at a rate of just one millimetre per day after laying.

Polymer Screeds - When a reduced thickness of floor is needed because of building factors, a polymer screed offers an extremely high strength solution to the situation. The setting times vary according to product guidelines.

Screeding Quotes Polegate East Sussex

Industrial and Heavy Duty Screed - Where traffic levels are high or heavy loading on the floor is necessary, heavy duty screeds offer maximum strength and durability.

Liquid or Self-Levelling Screeds - When a high standard of finish is needed this blend of cement and latex is employed to create SR1 level screed flooring. It's mainly used to produce a clean, smooth floor over a poor quality or damaged substrate and results in a finish onto which all types of flooring materials can be laid. These can be as little as one millimetre in depth, and thanks to the latex polymers, will still provide a high strength finish.

Fibre Reinforced Screed - The preferred choice by professional contractors for use with under floor heating systems. The fibres in the screed enhance it's durability and strength while also safeguarding against thermal shrinkage and cracking. The screed will set hard at a rate of roughly 1mm/day.

Fast Drying and Advanced Drying Screeds - As the name suggest, this screed dries rapidly and allows you to use the floor area much sooner. They are typically a fibre reinforced kind of screed that dries out at a rate of between 3-7mm/day per day and are used in time dependent projects.


To enable the screeding to be of a high quality finish that's hard wearing and durable, time must be spent on preparing the area before any screeding material is laid. The existing floor surfaces should be cleaned to eradicate any oil, grease, debris and paint which can affect the bond of the screeding.

Screeding Near Polegate (BN26)

Any cleaning products that are used in this phase shouldn't leave any residues, and the floor surface must be permitted to dry out naturally. It's essential to mend any crevices or cracks in the surface to stop them being visible and "travelling" up into your newly screeded floor. During an on-site survey your Polegate screeding contractor will establish what preparation work is necessary before any actual screeding begins.

Before any screeding can be laid a DPM (damp proof membrane) must be put down to shield the screed and final flooring from moisture damage. The damp proof membrane is made from thick polythene and various layers might be used to act as a moisture barrier and air insulating layer for the screeding.

If your house is located in an area where radon gas is present an additional barrier layer is needed to prevent radon gas from entering. This can be as simple as an airtight membrane, or in more serious situations an extraction and ventilation system will need to be installed under the screeding to extract any influx of radon gas from ground level.

Once the base has been prepared and any DPMs installed, a sealant or primer is then applied. A primer assists in the screed to bond to the base and membranes and different varieties exist depending on which screed type is being applied. These substances require experienced technicians to apply them in the appropriate proportions by using bespoke equipment, such as airless sprays.

Underfloor heating can now be laid out, installed and checked before the screed is applied. The heating pipes and cabling are securely mounted on insulation panels to prevent any movement and ensure they are held in the correct position. Under floor heating is one of the most effective ways to heat a room and an expertly installed system will produce even level of warmth in all areas of the floor.

Floor Screed Polegate (01323)

Naturally, if you aren't fitting underfloor heating, you simply ignore this step and get on with applying the screed. Your screeding contractor will give you guidance and advice on which sort of screed is suitable for your needs, according to your proposed use of the room. After the pouring of the screed there is at least twenty four hours (for advanced and quick drying screeds) before you can walk upon the surface, and a 72 hours minimum curing period for any floor covering installation. If you're hoping to wind up with a nicely finished and hard-wearing floor surface you must follow the manufacturer's guidelines with regard to heavy duty and standard screeds where the waiting period will be longer.

You can check the SR level of the completed screeding once it is hard enough to walk on. The standard SR test involves the use of a 2m straight edge to check for any fluctuations in the screed surface.

  • SR1 - Over the whole screed area, if there are no deviations greater than 3mm from the straight-edge, you've got a top specification SR1 standard surface.
  • SR2 - The normal standard flooring in industrial and commercial builds is classed as SR2 and has a maximum possible deviation of 5mm across the whole floor.
  • SR3 - SR3 is basic utility standard where a perfect finish is not required. This specification allows for a maximium deviation depth of 10 millimetres.

If your screeding has been laid with particular loading in mind then a structural engineer will be needed to perform tests. Using specialist equipment the engineer will assess the screeded surface strength and suitability of use in a load bearing environment. This should include a "drop hammer test" which assesses various aspects of the strength and flexibility of the screed. The precise measurement and testing tools required mean this can only be performed by a fully qualified structural engineer applying the British Standards BS8204 guidelines. (Tags: Floor Screed Polegate, Screeding Polegate, Floor Screeding Polegate, Floor Screeding Services Polegate).

Floor screeding services are available in Polegate and also in nearby places like: Alfriston, Willingdon, Wannock, Summerhill, Stone Cross, Hankham, Sayerland, Upper Dicker, Litlington, Magham Down, Foulride Green, Arlington, Eastbourne, Hellingly, Selmeston, Hailsham, and in these postcodes BN26 6BQ, BN26 5PT, BN26 5DA, BN26 5BT, BN26 5DS, BN26 5HE, BN26 6DE, BN26 5LU, BN26 5AL, BN20 9NU. Locally based Polegate floor screeders will likely have the postcode BN26 and the dialling code 01323. Checking this out can confirm that you access local screeding. Polegate home and business owners will be able to utilise these and lots of other related services.

Book a Screeder in Polegate UK

Latex Screeds Polegate

When a floor's surface needs a level of flexibility, it is wise to use a latex screeding. Latex screeds typically comprise 2 parts - a cement-based powder, and a liquid latex mixture. The water that is normally used in a screed mix is replaced by the liquid latex, which makes it quicker drying and more flexible than other standard screeds.

Prior to the laying of your chosen decorative surface, this latex compound is used for levelling-out sub-floors. This screeding is appropriate for sub-floors made of wood, sand/cement, quarry tiles, concrete or asphalt, is perfect for the application of adhesives and gives a smooth, resilient surface. Even if there is movement on your sub-floor, this type of floor screed will produce a flexible, crack-free finish.

When using a "floating" screed, for example when screeding is being laid on top of underfloor heating, thicknesses of 50-65mm may be necessary, and latex floor screeds aren't a suitable choice in this case.

Related Tasks

Screeding Related Tasks Polegate

There are a wide range of tasks that can be undertaken by your local Polegate floor screeding company including underfloor heating screeds, office floor screeding, floor screeding advice Polegate, acoustic flooring, floating screed, liquid screeds in Polegate, fast drying floor screeds, residential screeding, screed reinforcement, polished screed flooring, concrete pumping, shop screeding in Polegate, bonded screed, latex screed Polegate, structural screeds, floor screeding tools in Polegate, floor preparation services Polegate, final floor finishes, unbonded screed Polegate, granolithic screed, damp proof membranes in Polegate, sand screed Polegate, sand and cement screed, self-levelling floor screeding Polegate, anhydrite floor screeding, and more floor screeding tasks. These are just a selection of the duties that are accomplished by those installing floor screeding. Polegate contractors will let you know their whole range of services.

Skip Hire Polegate

Skip Hire Polegate

You are likely to generate a fair amount of waste when you're carrying out any kind of property makeovers or home improvements in Polegate. Subject to your specific situation, screeding work will create different amounts of waste. Now some screeders will be willing to take this waste away for you, and recycle it in an environmentally friendly way, while others will simply leave you to dispose of it on your own.

Where there is a substantial amount of waste, most property owners in Polegate choose to hire a skip. Skips come in different sizes according to your needs, and picking which skip to order is crucial. For smaller projects there are skip bags and mini-skips, for bigger home refurbishments and landscaping work there are midi-skips and standard builders skips, and for commercial and industrial use or really massive projects, roll-on roll-off skips are the best alternative.

CLICK HERE and enter your details to get Polegate skip hire quotes.


Floor Screeding Near Polegate

Also find: Litlington floor screeding, Alfriston floor screeding, Arlington floor screeding, Willingdon floor screeding, Stone Cross floor screeding, Wannock floor screeding, Hankham floor screeding, Foulride Green floor screeding, Magham Down floor screeding, Hellingly floor screeding, Upper Dicker floor screeding, Sayerland floor screeding, Hailsham floor screeding, Eastbourne floor screeding, Selmeston floor screeding, Summerhill screeding services and more. All these towns and villages are catered for by companies who do screeding. Polegate homeowners can get screeding estimates by clicking here.

Floor Screeding Services Polegate

Find Floor Screeding in Polegate Here
Screeding Services in Polegate East Sussex (01323)
  • Polegate Floor Screeding
  • Polegate Residential Screeding
  • Polegate Cheap Floor Screeding
  • Polegate Fibre Reinforced Screeding
  • Polegate Polished Screed Floors
  • Polegate Screeding Services
  • Polegate Underfloor Heating Installations
  • Polegate Floor Insulation
  • Polegate Commercial Screeding
  • Polegate Fast-Dry Floor Screeding
  • Polegate Floor Damp Proofing
  • Polegate Screed Calculator Service
  • Polegate Floor Levelling
  • Polegate Screeding Advice

Screeding Around Polegate: Over the past twelve months screeded floors had been installed in these Polegate streets: Farmlands Close, Church Road, Eastbourne Road, Western Avenue, Levett Close, Romney Road, Malcolm Gardens, West Close, Rye Close, Pevensey Road, St Leonards Terrace, Central Avenue, Shepham Lane, Windsor Way, Polegate By-pass, Spurway Park, Victoria Road, Northfield, Windmill Road, Porters Way, School Lane, Bay Tree Lane, Watermill Close, Northern Avenue, Paddock Gardens, Brook Street, Bramley Road, and in these East Sussex postcodes: BN26 6BQ, BN26 5PT, BN26 5DA, BN26 5BT, BN26 5DS, BN26 5HE, BN26 6DE, BN26 5LU, BN26 5AL, BN20 9NU. These locations recently saw activity by specialists in screeding. Polegate business and home owners received professional and dependable screeding services on every occasion.

East Sussex Screeders Near Me Polegate

Other Trades Polegate East Sussex: Ok, so you are currently in search of floor screeding in Polegate, however you may also require a plumber in Polegate, a building contractor in Polegate, an underfloor heating specialist in Polegate, rubber flooring in Polegate, a carpet fitter in Polegate, a carpenter in Polegate, a heating engineer in Polegate, SKIP HIRE Polegate, wood flooring in Polegate, waste removal in Polegate, an electrician in Polegate, a plasterer in Polegate, a bricklayer in Polegate, a handyman in Polegate, a floor tiler in Polegate, when carrying out any home improvement project in Polegate, East Sussex.

If you would like to get local information about Polegate, East Sussex click here

Floor screeding in BN26 area, telephone code 01323.

TOP - Floor Screeding Polegate


(This screeding Polegate article was created by Stephen Locke 15-11-21)