Floor Screeding Holyhead

Holyhead Screeding & Floor Levelling Services

Floor Screeding Holyhead Wales (LL65): When you're upgrading your Holyhead property that has damaged or uneven floors, or perhaps converting a basement or cellar to useful living space, a competent floor screeding company can provide you with a firm starting point. A screed is used to generate a smooth floor over a rough concrete sub-base and provide a solid base for you final flooring material. A floor screed is a fundamental element of most building and restoration projects in Holyhead.

Free Holyhead Floor Screeding Quotes


It does not matter how big or small the area you need to be levelled, an established floor screeding firm in Holyhead will have the appropriate equipment, expertise and knowledge to give you a superb standard of service. After a meticulous assessment of your project, they will be in a position to inform you about which method of laying is best suited to your circumstances, and what is the best screed.

Floor Screeding Holyhead Wales (LL65)

Your screeding contractor will also inform you if a structural engineer is required for your undertaking, in order to evaluate flex strength, load requirements and point loadings that your screed floor might need to conform with British Standards and building regulations.

Bringing in a highly trained and skilled contractor will guarantee that you use the correct kind of screed for the room's intended usage to extend the lifespan of your floor. Selecting the appropriate screeding materials and the best installation technique is vital if you want to finish up with a quality and durable finish for your floor surface.

Ensure you get more than one estimate for your Holyhead based floor screeding project and also ask what standard of finish each quote is for. The SR (Surface Regularity) finish is the number to keep your eye on when reviewing a quotation from your Holyhead screeding contractor. SR1 is the best quality, and whilst SR2 and SR3 might be less expensive at first glance, they do not guarantee a totally even or flat floor surface. An SR2 or SR3 level may mean there are flat spots or ridges that could cause issues when installing your final floor surface.

Floor Screeders Holyhead (01407)

The regulations and guidelines set out in in the British Standards BS8204 have to be followed by any Holyhead floor screeding contractor and they should also hold accreditation with the manufacturers of specialist screeding materials (Gypsol, Flowcrete, Cemfloor etc.) to prove their safe working practices and competence. A contractor holding accreditations demonstrates that they have been assessed and trained in using these screeding products and can offer a high quality service in all aspects of their installation.

Holyhead commercial screeders may be involved in the screeding of floors in boutiques, factories, shops, schools, warehouses and hospitals.


Standard Screeds - A blend of sand and cement which is okay for normal residential use. The standard screed is a mix of five parts sand to one of cement. The standard flooring screed dries at a rate of 1mm thickness each day.

Screeding Quotes Holyhead Wales

Fibre Reinforced Screed - The professional's choice for domestic use over the top of under floor heating. The greater flex and strength offered by the special fibres in this screed help protect the flooring from thermal cracking and shrinkage. At about one millimetre per day, it has a similar curing rate to standard screed.

Polymer Screeds - A high strength solution where a reduced screed thickness is needed. Polymer screeds are available from a number of screed manufacturers and owing to their different chemical compositions have distinct drying times for each product.

Fast Drying and Advanced Drying Screeds - As the name suggest, these screeds dry quickly and allow you to use the floor area much sooner. These are typically a fibre reinforced type of screed that dries out at a rate of between 3-7mm/day per day and are employed in time critical projects.

Self-Levelling or Liquid Screeds - A cement and latex material which can produce the highest standard SR1 finish. Mostly used to improve a poor substrate level or damaged floor so as to lay a brand new flooring surface, such as tiles over it. The liquid screed can be laid to a depth of only one millimetre, but will still provide a high strength base to take a wide variety of flooring materials.

Industrial and Heavy Duty Screed - Made for maximum durability and strength on floors where traffic is expected to be high or specific loading of the floor base is required.


Preparation is vital for a high quality screed surface that will be hard wearing and durable. Any paint, grease, debris and oil on the existing floor level can adversely affect the bonding of the screed, and should be eradicated.

Screeding Near Holyhead (LL65)

If any products were used in this process it's important to ensure that no residues of soaps or other cleaning products are left on the floor surface and it is allowed to dry out naturally. At this stage cracks should be repaired as these can travel up through your laid screed and be reflected in the finished surface. During a site survey your Holyhead screeding company will notice what preparations are needed before any actual screeding work commences.

Before any screeding can be laid a damp proof membrane (DPM) must be put down to protect the screed and final flooring from moisture. The damp proof membrane is made from thick polythene sheeting and various layers could be used to act as a moisture barrier for the screed.

If the area where you live is at risk from radon then one additional barrier is needed to prevent the gas from entering via the ground. If radon gas occurs in large amounts then a complete ventilation and extraction system may be installed beneath the screed which will remove any gases that might seep in from the ground.

The final stage of the surface preparation process is the spraying or painting of a sealer or primer. These primers and sealers will make certain the screed bonds successfully to the base and help create a quality finished floor. Devices such as airless sprays are used to apply a primer or sealant, which should be done by certified screeding contractors in Holyhead sticking to the manufacturer's guidelines.

Now is the time that under floor heating can be installed and laid out in the correct manner. Insulation panels can be arranged and the heating pipes and cables will be securely fastened so that there is no movement while the screed is applied. When properly installed an under floor heating system is an effective way to warm up a room and decent quality screeding retains its heat, creating an even level of warmth across the floor.

Floor Screed Holyhead (01407)

If you are not putting in under floor heating the screed can now be prepared in situ and poured. Your screeding specialist will have given you advice and guidance on which screed type is suitable for your requirements, according to your proposed use of the room. Remember that even quick drying screeds have a minimum of twenty four hours before you're able to walk on any screeded surface and at least 72 hours before any floor coverings can be fitted. Manufacturer's drying instructions for standard and heavy duty screeds should be observed in order to achieve a quality finish and end up with an even and stable surface.

The SR level of your screed can be ascertained once it's hardened enough to be walked upon. Using a two metre straight-edge the surface is examined for any dips, ridges and deviations in the screed surface.

  • SR1 - Disparities of 3 millimetres or less as measured across the entire area shows your screed floor to be of the highest quality and is specified as SR1.
  • SR2 - SR2 is for normal standard commercial and industrial floors and can deviate from the straight-edge by up to 5mm.
  • SR3 - If the deviation is 10mm or less the screeding quality is classed as SR3 and is the standard required for utility and garage areas.

If your screed has been laid with particular loading in mind then a qualified structural engineer will be required to perform tests. The assessment will make sure that your new screed is viable for the load point requirements set down in the site survey. The screeding should be subjected to a drop hammer test to determine strength and flexibility in distinct areas. The precise measurement and testing tools mean this can only be carried out by a trained structural engineer heeding the guidelines of the British Standards BS8204. (Tags: Floor Screeding Holyhead, Screeding Holyhead, Floor Screed Holyhead, Floor Screeding Services Holyhead).

Book a Screeder in Holyhead UK

Floor screeding is available in Holyhead and also in nearby places like: Llanfaelog, Gwalchmai, Trearddur Bay, Bodedern, Bryngwram, Kingsland, Rhosneigr, Four Mile Bridge, Mountain, Penrhos, South Stack, Anglesey, Llaingoch, and in these postcodes LL65 1NG, LL65 1DS, LL65 1TE, LL65 1TF, LL65 1SE, LL65 1AH, LL65 1LU, LL65 1LX, LL65 1PH, and LL65 1SY. Locally based Holyhead floor screeders will most likely have the dialling code 01407 and the postcode LL65. Verifying this can ensure you access locally based screeding. Holyhead home and business owners will be able to utilise these and various other comparable services. To obtain screeding price quotes, you can simply click on the "Quote" banner.

Latex Floor Screeds

When a degree of flexibility is necessary in the surface of a floor you might find that the use of a latex self-levelling screed will be advantageous. Normally coming in two parts, latex floor screeds comprise a cement-based compound, and a liquid latex additive. Whereby water is normally used in a screed mix, this is replaced with the latex liquid, meaning that it's more flexible than other types of screed, and quicker drying.

This latex screed compound is used to level a subfloor before the final decorative surface is laid. This is appropriate for use on sub-floors of sand/cement, asphalt, concrete, wood and stone tiles, to give a smooth, durable surface which is ideal for the application of adhesives. If there happens to be a bit of movement in the sub-floor this latex screed will give you a flexible, crack-free finish on which you can lay your chosen floor coverings.

When a screed is being laid over a layer of either acoustic or thermal insulation (i.e. a "floating" screed), latex floor screeds are not appropriate, because in this case (normally when screeding on top of underfloor heating), you'll probably require a thickness of 50-75mm.

Screed Floor Removal Holyhead

Involving the extraction and elimination of existing screed, screed floor removal is a necessary practice. When upgrading or renovating a floor, it is frequently essential. Specialised equipment and techniques are employed in the removal process to break up and remove the screed layer in an effective manner. The surface can be prepared for new floor covering or other modifications, thanks to this. By specializing in screed floor removal, contractors ensure the safe and efficient removal of the old screed, enabling the floor to start afresh, whether for design changes, upgrades or repairs. (22264 - Floor Screed Removal Holyhead)

Floor Screeding Near Holyhead

Also find: Mountain floor screeding, Llaingoch floor screeding, Kingsland floor screeding, Gwalchmai floor screeding, Trearddur Bay floor screeding, Llanfaelog floor screeding, Anglesey floor screeding, Penrhos floor screeding, Bryngwram floor screeding, South Stack floor screeding, Bodedern floor screeding, Four Mile Bridge floor screeding, Rhosneigr floor screeding and more. Screeding services are widely available in pretty much all of these locations. The knowledge and expertise required to provide top-notch flooring services are possessed by these competent specialists. Screeding is an art that they have mastered, ensuring that the project is executed to the highest possible standards, whether it’s for commercial or domestic properties. Local residents can get screeding quotes by simply clicking here.

Screeding Related Tasks

Screeding Related Tasks Holyhead

There is a wide range of work that can be accomplished by your local Holyhead floor screeder including latex screeding, fibre reinforced screeding, warehouse floor screeding, floor screed testing, coloured floor screeding Holyhead, industrial floor screeding, screeding repairs, self-levelling floor screeding, floor insulation, professional floor levelling services in Holyhead, cheap floor screeding Holyhead, garage screeding, decorative floor screeding Holyhead, floor resurfacing, concrete screeds in Holyhead, liquid screeding in Holyhead, sand screeds, screeding advice, damp proof membranes, floor renovation, floor screeding Holyhead, screed floor removal in Holyhead, structural screeds, fast drying screeds Holyhead, concrete toppings, floor smoothing compounds, unbonded screed, concrete moisture testing services, acid etching concrete, floor screeding tools, pumped screed installation, screed surveys, screed pump hire, flow screeding, external screeding, and lots more floor screeding tasks. These are just a handful of the tasks that are performed by people specialising in screeding. Holyhead specialists will let you know their entire range of floor screeding services.

TOP - Floor Screeding Holyhead

Screeding Quotations Holyhead - Floor Screeding Holyhead - Floor Screeding Near Me - Quick-Dry Screeding Holyhead - Floor Screeding Services Holyhead - Floor Screed Contractors Holyhead - Screeder Holyhead - Commercial Screeding Holyhead - Floor Screeding Contractors Holyhead


(This screeding Holyhead content was generated on 04-04-2024)

and more