Floor Screeding Corby Northamptonshire (NN17): A professional floor screeder can level an uneven or damaged floor, assist with renovations or help install under floor heating on your Corby property, when needed. Floor screeding provides a smooth, level finish to a basic sub-base, and enables you to lay your final layer of flooring material, (tiles, carpets, boards etc) over the top of it. If you want your floors to last a long time then a floor screed is the most important factor in any renovation or building task.
FLOOR SCREEDING EXPERTS CORBY
A professional screeding specialist in Corby will have know-how and experience to help you achieve a perfectly finished floor in whichever size room you're renovating. They'll be ready to advise you about the correct type of screed that your project requires, and the best methods for applying and installing it.
They will additionally assess if a structural engineer is required to make certain that any flex strength, point loadings and load bearing are met as laid down in construction and building regulations.
The skills and training that a screeding contractor brings to your project should guarantee a high quality end result and help in prolonging the lifetime of your floors. Choosing the appropriate screeding materials and the best installation technique is crucial if you want to finish up with a quality and durable finish for your floor.
Before choosing a floor screeding contractor from those operating in the Corby area, ask to what standard of finish they are basing their quotation, and also make certain that you get multiple quotes. The estimate may be based on what is called the SR, or Surface Regularity number. SR2 and SR3 might be less costly options, however the finished floor surface could have deviations and errors, whilst SR1 guarantees a perfect quality of finish. This means you may have to fix any patches that could cause problems when putting down your final flooring material.
Every Corby screeding company must adhere to British Standards (BS8204) and should have accreditation from screeding material and equipment manufacturers, for instance Cemfloor, Flowcrete, Gypsol. A company holding such accreditations demonstrates that they have been assessed and trained in using these screeding products and can offer a high standard of service in all aspects of their installation.
Corby commercial screeders may be involved in floor screeding in shops, salons, hospitals, warehouses, factories and schools.
TYPES OF SCREED
Standard Screeds - Used in residential projects where the combination of cement and sand is okay for regular footfall usage. 5 parts sand to 1 part cement is the normal mix for standard screeds. Once it has been laid this 5:1 ratio will dry at a rate of 1mm per day.
Polymer Screeds - An extremely high strength solution where a reduced screed thickness is necessary. Polymer screeds are available from a number of screed manufacturers and because of their diverse chemical compositions have specific curing times for each individual product.
Fast Drying and Advanced Drying Screeds - As the name suggest, this screed dries quickly and allows you to use the floor area much sooner. These are usually a fibre reinforced kind of screed that dries out at a rate of between 3-7mm/day per day and are used in time critical flooring projects.
Industrial and Heavy Duty Screed - Made for maximum durability and strength in places where traffic is expected to be high or specific loading of the floor base is necessary.
Liquid or Self-Levelling Screeds - When the highest possible standard of finish is required this blend of latex and cement is employed to create SR1 level screeding. The self-levelling compound provides a smooth and level surface over a damaged floor or rough substrate to allow all flooring materials to be laid. They can be as little as one millimetre thick, and thanks to the latex polymers, will still provide a high strength finish.
Fibre Reinforced Screed - The professional's choice for domestic use over the top of underfloor heating. The special fibres in this screed improve overall strength and durability whilst also safeguarding against thermal cracking and shrinkage. At roughly one millimetre per day, it has the same curing rate to standard floor screed.
SCREEDING PREPARATION AND INSTALLATION
Preparation is crucial for a high quality screed surface that will be durable and hard wearing. Any oil, grease, debris and paint on the original floor surface can affect the bonding of the screed, and should be eliminated.
Any cleansing products which are used during this process shouldn't leave any residues, and the floor surface must be permitted to dry by itself naturally. If screeding over a stone or cement floor any cracks should be mended to prevent them from "travelling" through your screed layer and causing deviations on the final surface. An experienced Corby screeding company will pick up on such problems during the site survey and ensure all preparations are finished before pressing on with the next steps in the floor screeding process.
To shield the screed layer and flooring materials from dampness rising up through the ground, a DPM (damp proof membrane) must be installed. The damp proof membrane is made of thick polythene and various layers might be used to act as a moisture barrier and air insulating layer for the screed.
A further air-tight barrier could be necessary if your property is in a location which is regarded as prone to radon. If radon gas occurs in severe doses then a full ventilation system might be needed under the layer of screed which will extract any gases that might seep in from ground level.
The final step of the surface preparation process is the spraying or painting of a sealer or primer. A primer assists in the screed bonding correctly to the base and different varieties exist based upon which type of screed is being applied. On account of their special nature, only experienced screeding contractors in Corby are capable of using them correctly, safely and through the use of equipment which is made for the task.
If you are installing underfloor heating, this is the time that it will need to be properly set out and installed. The wires and heating pipes are securely mounted on insulation panels to stop any movement and ensure they are positioned correctly. Warmth is spread evenly across the floor in a properly installed under floor heating system, and with it being an effective choice of heating, it's a good choice for the majority of Corby home restoration projects.
Needless to say, if you aren't installing under floor heating, you simply ignore this stage and apply the screeding. Your intended use of the room will assist your screeding company on what sort of floor screed is ideal for your needs. Bear in mind that even advanced and quick drying screeds have a minimum of 24 hours before you can walk over any screeded surface and a minimum 3 days before any flooring can be fitted. Such timescales will be longer for heavy duty and standard screeds and the manufacture's guidelines must be followed to achieve the best finish and longevity of the floor.
You can evaluate the SR level of the finished screed once it's hard enough to walk on. Using a two metre straight-edge the floor surface is examined for any dips, deviations and ridges in the surface of the screed.
- SR1 - Over the whole area, if there aren't any disparities of more than 3mm from the straight-edge, you've got a top quality SR1 level surface.
- SR2 - SR2 is for normal standard floors in commercial and industrial projects and can deviate from the straight-edge by up to 5 millimetres.
- SR3 - For a utility area or room where the quality of finish is relatively unimportant the SR3 is the specification and should have a maximum deviation measurement of 10 millimetres or less.
If you need load bearing checks, a qualified structural engineer is necessary to carry out the testing. Using specialist equipment the engineer will assess the screed strength and its suitability for use in a load bearing environment. This can include a "drop hammer test" which records specific data on the strength and flexibility of the screed. Only experienced structural engineers heeding the British Standards BS8204 regulations are allowed to carry out such testing and sign off on the structural safety of a screed floor. (Tags: Floor Screeding Services Corby, Screeding Corby, Floor Screeding Corby, Floor Screed Corby).
Floor screeding services are available in Corby and also nearby in: Upper Benefield, Deene, Geddington, Snatchill, Rockingham, Lyddington, Caldecott, Weldon, Brigstock, Great Oakley, Cottingham, Harringworth, Gretton, Stanion, Great Easton, and in these postcodes NN17 1FL, NN17 1HP, NN17, NN17 1EP, NN17 1PG, NN17 1EQ, NN17 1EJ, NN17 1EA, NN17 1DH, NN17 1SW. Locally based Corby floor screeders will most likely have the postcode NN17 and the telephone dialling code 01536.
There are a whole host of tasks that can be conducted by your local Corby floor screeder including screeding estimates, screed repairs, floor screeding advice, rapid strength screeds in Corby, waterproof screeding, self-levelling screeding Corby, shop screeding, cellar floor screeding, industrial screeding, floor levelling, cheap screeding in Corby, bonded concrete screeding, floor restoration in Corby, domestic screeding in Corby, fibre reinforced floor screeding Corby, polished floor screeding Corby, floor screed testing, floor preparation services, and more floor screeding tasks.
Floor Screeding Near Corby
Also here, local home and business owners can obtain screeding quotes.: Gretton floor screeding, Upper Benefield floor screeding, Great Easton floor screeding, Weldon floor screeding, Lyddington floor screeding, Stanion floor screeding, Brigstock floor screeding, Rockingham floor screeding, Caldecott floor screeding, Snatchill floor screeding, Geddington floor screeding, Harringworth floor screeding, Deene floor screeding and more. are available in almost all of these locations. The expertise and skills required to provide high-quality flooring solutions are possessed by these seasoned professionals. With respect to , be it for domestic or commercial properties, they ensure that the work is performed to the highest standards. By going
- Corby Screeding Services
- Corby Liquid Screeds
- Corby Floor Levelling
- Corby Polished Screed Floors
- Corby Floor Damp Proofing
- Corby Domestic Floor Screeding
- Corby Floor Screeding
- Corby Cheap Screeding
- Corby Screed Calculator Service
- Corby Fibre Reinforced Floor Screeding
- Corby Underfloor Heating Installation
- Corby Floor Screeding Advice
- Corby Floor Insulation
- Corby Fast-Dry Screeding
Screeding Jobs Corby: Get floor screeding jobs in Corby here: Corby Screeding Jobs
For the best local Corby information go here
Floor screeding in NN17 area, (dialling code 01536).