Floor Screeding Ardeer

Ardeer Screeding & Floor Levelling Services

Floor Screeding Ardeer Scotland (KA20): A floor screeding professional can help install under floor heating, level an uneven or damaged floor or help with renovations on your Ardeer home, when necessary. Before you're able to lay a suitable floor covering, be it carpet, tile or wood, the surface of the floor should be as flat as is possible; this is why floor screeding is needed. Floor screeding can provide a durable, quality finish for any room.

Free Ardeer Floor Screeding Quotes


Whatever size room you are remodeling, a floor screeding company in Ardeer will be able to provide you with the expertise and correct working methods to establish the perfect base for your flooring. After evaluating your project they'll advise you about the optimal choice of screeding and which strategy for applying it is most suited to your circumstances.

Floor Screeding Ardeer Scotland (KA20)

Your screeding company will also inform you if a structural engineer is needed for your undertaking, in order to check on flex strength, load bearing and point loadings that your flooring might require to conform with building regulations and British Standards.

A qualified and skilled work force is imperative for a successful outcome and will extend the lifespan of your floor through the use of the correct type of screed for the intended purpose of your room. Picking the correct screeding materials and the best installation technique is vital if you want to end up with a quality and durable finish for your floor.

There are many screeding specialists in the Ardeer area so make sure you get multiple quotes for your project before picking out a company and know to what standard of finish it's for. For domestic properties an estimate will normally be given for an SR (Surface Regularity) standard of SR1 or SR2. SR1 is the highest standard, and while SR2 and SR3 might be more cost-effective at first glance, they don't guarantee a totally even or flat floor surface. This could mean that you may have to fix any areas that could cause issues when laying your final flooring material.

Floor Screeders Ardeer (01294)

The rules and regulations set out in in the British Standards BS8204 must be followed by any Ardeer floor screeding company and they must also be approved by the manufacturers of specialist screeding materials (Cemfloor, Gypsol, Flowcrete etc.) to prove their competence and safe working practices. This accreditation scheme demonstrates a firm's high quality performance and training in the use of a manufacturer's screeding products.

Commercial screeders in Ardeer will usually undertake screeding projects in restaurants, warehouses, hospitals, factories, shopping centres and schools.


Standard Screeds - Widely used in residential flooring projects where the mix of sand and cement is perfectly acceptable for everyday footfall use. The standard screed is a mix of five parts sand to one of cement. Once its been laid this 5:1 ratio will dry at a rate of 1mm per day.

Screeding Quotes Ardeer Scotland

Self-Levelling or Liquid Screeds - When a high standard of finish is necessary this mixture of cement and latex is employed to achieve SR1 level screed flooring. Mostly used to finish off a damaged floor or poor substrate level in order to lay a new flooring surface, such as tiles over the top of it. The liquid screed can be laid to a thickness of only 1mm, but still provides a strong surface to take a wide range of flooring finishes.

Industrial and Heavy Duty Screed - A screed that's designed for heavy traffic and high load areas where maximum durability and strength is essential.

Fibre Reinforced Screed - The preferred choice by professional installers for use with underfloor heating systems. The improved strength and flexibility provided by the fibres within the screed help protect the flooring from shrinkage and cracking due to heat. At around 1mm per day, it has the same drying rate to standard screed.

Advanced Drying and Fast Drying Screeds - If there is a need to use the floor at the earliest opportunity a fast drying screed can be used. Drying at a rate of three to seven millimetres, determined by the mixture, they're typically a fibre reinforced type of screed and are suitable for projects which have tight deadlines.

Polymer Screeds - Provides an extremely high level of strength with a reduced thickness. Due to their different chemical compositions, polymer screeds have varying drying times which you can verify by reading manufacturer's guidelines.


To guarantee the screeding is of a good quality finish that's durable and hard wearing, time should be spent on carefully preparing the area before any screed is laid. The original floor surface should be cleaned to remove any paint, grease, oil and debris which can affect the bond of the screeding.

Screeding Near Ardeer (KA20)

If cleansing products were used it is essential to remove any traces of soap etc, and leave the surface to dry naturally. It is essential to fix any cracks or crevices in the floor surface to avoid them being reflected and "travelling" up into the newly screeded floor. An experienced Ardeer screeding specialist will address these problems during the site survey and make certain all preparations are finished before pressing on with the next stages of the floor screeding process.

To protect the screeding layer and flooring materials from dampness rising up through the ground, a DPM (damp proof membrane) must be installed. The damp proof membrane is made of thick polythene and different layers may be used to act as a moisture barrier and air insulating layer for the screeding.

An additional air-tight barrier may be necessary if your home or business premises is in an area that's known to be susceptible to radon gas emissions. If radon occurs in severe doses then a full ventilation and extraction system might be needed underneath the layer of screed which will remove any gases that could seep in from the ground.

As soon as these steps have been taken the screeding company will apply a sealer or primer to the prepared base surface. A primer helps with the screed to bond to the base and membranes and different types exist according to which screed type is being used. Custom-made equipment such as airless sprays will usually be used to apply a sealant or primer, by qualified screeding installers in Ardeer sticking to the manufacturer's guidelines and safety advice.

If you're installing under floor heating, this is the time that it will need to be correctly laid out and installed. The under floor heating system will be carefully positioned and mounted firmly on insulation panels to stop any movement during screed pouring process. Warmth is evenly spread across the floor in a skillfully fitted underfloor heating system, and in conjunction with it being an effective method of heating, it is an ideal choice for most Ardeer home restoration projects.

Floor Screed Ardeer (01294)

Of course, if you aren't fitting underfloor heating, you can just ignore this step and apply the screeding. The particular requirements of the room will determine the sort of screeding that's used. For advanced and quick drying screeds there will be at least twenty four hours delay before it can be walked over, and a further seventy two hours minimum before you are able to lay any flooring materials. This time period is increased for heavy duty and standard screeds and the manufacture's product guidelines should be followed to the letter to create the optimum finish and durability of the floor.

Once the screed has set it can be checked for quality to determine its SR level. The standard SR test uses a 2m straight edge to check for any variations in the floor surface.

  • SR1 - Over the entire area, if there are no deviations greater than 3mm from the straight-edge, then you have a top quality SR1 level surface.
  • SR2 - If the floor has a deviation from the straight-edge of five millimetres or less it is classified as SR2 quality and is the standard for industrial and commercial projects.
  • SR3 - For other floors where the finish is comparatively inconsequential the SR3 is the standard and should have a deviation measurement of ten millimetres or less.

If you need load bearing checks, a structural engineer is required to carry out the testing. The testing will ensure your newly laid screed is viable for the load bearing requirements laid out in the site survey. This should include a drop hammer test which records specific data on the flexibility and strength of the screed. Any screed floor that's got load bearing requirements must be okayed by a qualified structural engineer obeying the British Standards BS8204 regulations. (Tags: Floor Screeding Ardeer, Screeding Ardeer, Floor Screeding Services Ardeer, Floor Screed Ardeer).

Floor screeding services are available in Ardeer and also in nearby places like: Dalgarven, Barrmill, Kilwinning, Dalry, Seamill, Hunterston, Salcoats, Irvine, Perceton, Girdle Toll, Beith, Stevenston, Lawthorn, Gateside, Montgreenan, Lylestone, West Kilbride, and in these postcodes KA20 3LY, KA20 3LP, KA20 3LL, KA20 3LZ, KA20 3LJ, KA20 3LR, KA20 3LQ, KA20 3LB, KA20 3LG, KA20 3LA. Locally based Ardeer floor screeders will most likely have the postcode KA20 and the dialling code 01294. Verifying this should make certain that you are accessing local floor screeding. Ardeer home and business owners can utilise these and numerous other similar services.

Book a Screeder in Ardeer UK

Latex Screeding Ardeer

When the surface of a floor needs a certain degree of flexibility, it is wise to use a latex floor screed. Normally coming in two parts, latex screeds comprise a cementitious powder and a latex liquid component. Latex screeds are more flexible and quicker drying than other types of screed, because the water which is normally used is substituted with the latex liquid.

Prior to the laying of the final decorative covering, this latex product is used for levelling-out subfloors. This is suitable for use on substrate of asphalt, wood, quarry tiles, concrete and sand/cement, to give a resilient and smooth surface which is perfect for the application of flooring adhesives. This type of screeding will provide a flexible, crack-free finish, even if there's a bit of movement in your sub-floor.

When using a "floating" screed, for example when screed is being laid over underfloor heating, thicknesses of 50 to 75 millimetres may be desirable, and latex flooring screeds are not suitable for this purpose.

Screed Floor Removal

Existing screed can be extracted and eliminated from a surface through the procedure of screed floor removal. Upgrading or refurbishing a floor often entails the need for it. To successfully break up and remove the screed layer, specialist techniques and equipment are indispensable in the removal process. It permits the surface to undergo preparation for new flooring material or other alterations. Contractors with expertise in screed removal skillfully carry out the safe and efficient elimination of the previous screed, granting the floor a fresh beginning suitable for design changes, upgrades or repairs. (62299 - Screed Floor Removal Ardeer)

Skip Hire Ardeer

Skip Hire Ardeer

Managing the waste that is produced when carrying out property makeovers or home refurbishments in Ardeer, is one of the major downsides to conducting this type of project. Although in general, floor screeding doesn't generate a huge amount of waste, it does depend on the scale of your project and the sort of surface that it's being laid on. It could be the case that waste removal is listed in your quote, since many screeding companies are happy to remove waste as an integral part of the job. Make sure that you ascertain this, since you may be landed with handling your own waste removal.

Whether you're left with doing this yourself, or the tradesman is sorting it out, a skip will often be required. Coming in a range of sizes, skips can be arranged to match the amount of waste that you are expecting to create. Generally mini-skips hold about 2 cubic yards of waste (25 bin bags), midi-skips hold about 4 cubic yards of waste (45 bin bags), builders skips hold about 6 cubic yards of waste and roll-on-roll-off skips hold about 20 cubic yards of waste (220 bin bags). Skip bags generally hold around 1-1.5 cubic yards of waste.

To obtain a price for skip hire in Ardeer GO HERE.

Related Tasks

Screeding Related Tasks Ardeer

There is a variety of work that can be undertaken by your local Ardeer floor screeding specialist including liquid screeds, floor insulation in Ardeer, rapid strength floor screeding, underfloor heating installations, structural screeds, final floor finishes in Ardeer, screed surveys & testing, flow screeding in Ardeer, sand floor screeding Ardeer, self-levelling floor screeding Ardeer, screed reinforcement, factory floor screeding in Ardeer, underfloor heating screeding, floor screed testing, floor renovation, external screeding, cheap screeding, unbonded screed Ardeer, concrete pumping, screeding quotes Ardeer, latex screed, concrete screed, floor noise dampening Ardeer, substrate floor preparation Ardeer, acoustic flooring, lightweight screeding, shop screeding, domestic floor screeding, and lots more floor screeding tasks. These are just a handful of the duties that are undertaken by those specialising in screeding. Ardeer professionals will be happy to inform you of their entire range of services.


Floor Screeding Near Ardeer

Also find: Seamill floor screeding, Dalgarven floor screeding, Salcoats floor screeding, Girdle Toll floor screeding, Gateside floor screeding, Perceton floor screeding, Barrmill floor screeding, Montgreenan floor screeding, Beith floor screeding, Lawthorn floor screeding, Lylestone floor screeding, Hunterston floor screeding, West Kilbride floor screeding and more. Screeding services are widely available in all these locations. Well-equipped with the essential expertise and skills, these seasoned professionals excel in delivering high-quality flooring solutions. They're well-versed in screeding, ensuring that the task is completed to the highest standards, be it for commercial or residential properties. To get screeding price quotes, local residents can simply click here.

Floor Screeding Services Ardeer

Find Floor Screeding in Ardeer Here
Screeding Services in Ardeer Scotland (01294)
  • Ardeer Underfloor Heating Installations
  • Ardeer Floor Screeding
  • Ardeer Cheap Floor Screeding
  • Ardeer Polished Screed Floors
  • Ardeer Fibre Reinforced Floor Screeding
  • Ardeer Screed Calculator Service
  • Ardeer Fast-Dry Floor Screeding
  • Ardeer Residential Screeding
  • Ardeer Floor Screeding Advice
  • Ardeer Liquid Screeds
  • Ardeer Floor Damp Proofing
  • Ardeer Floor Insulation
  • Ardeer Floor Levelling
  • Ardeer Screeding Services

Ardeer Screeding Jobs: Find floor screeding jobs near Ardeer here: Screeding Jobs Ardeer

If you're interested in local Ardeer info check here

Floor screeding in KA20 area, and dialling code 01294.

TOP - Floor Screeding Ardeer


(This screeding Ardeer content was written on 21-02-2024)