Floor Screeding Burnham-on-Sea

Burnham-on-Sea Screeding & Floor Levelling Services

Floor Screeding Burnham-on-Sea Somerset (TA8): If you have an uneven or damaged floor, are hoping to install underfloor heating or are renovating a property or cellar in your Burnham-on-Sea home, then it's the perfect time to consider hiring a professional floor screeder. Before you can lay a final floor covering, be it tile, carpet or wood, the floor base needs to be as flat as is possible; which is why screeding a floor is frequently needed. Floor screeding will provide a high quality and durable floor surface for almost any room.

Free Burnham-on-Sea Floor Screeding Quotes

FLOOR SCREEDING EXPERTS BURNHAM-ON-SEA

It does not matter how big or small the area you need levelling, a competent floor screeding specialist in Burnham-on-Sea will have the necessary knowledge, equipment and expertise to provide you with an excellent standard of service. They will assess your project and verify the correct sort of screed you need and how best to apply it.

Floor Screeding Burnham-on-Sea Somerset (TA8)

It might be a requirement, based on the intended use of the room, for a structural engineering survey to conform to building regulations on flex strength, load bearing and point loadings of the screed floor.

Working with a skilled and highly trained specialist will ensure you get the appropriate kind of screed for the room's intended usage and get the optimum lifespan out of the resulting flooring. Selecting the appropriate screeding materials and the method of installation is vital if you want a durable and quality finish for your floor surface.

Before deciding upon a floor screeding company from those operating in the Burnham-on-Sea area, ask to what standard of finish they're basing their quotation, and also ensure that you get multiple estimates. For domestic properties a quotation will normally be given for an SR (Surface Regularity) calculation of SR1 or SR2. SR2 and SR3 may be less costly options, however the finished floor surface might have errors and deviations, whilst SR1 guarantees a pretty much perfect quality of finish. This could mean that you might have to correct any patches that might cause issues when putting down your finished flooring solution.

Floor Screeders Burnham-on-Sea (01278)

Every Burnham-on-Sea screeding company must observe British Standards (BS8204) and should have some kind of accreditation from the manufacturers of specialised screeding equipment and materials, e.g. Cemfloor, Flowcrete, Gypsol. The training and assessment of a floor screeding contractor by such manufacturers is highlighted by the use of the accreditation scheme, and guarantees reliability and safe working practices on any project involving their materials.

For larger floor screeding projects in shopping centres, hotels, warehouses, hospitals, factories and schools, dedicated Burnham-on-Sea commercial screeders will be required.

TYPES OF SCREED

Standard Screeds - Frequently used in domestic projects where the mixture of sand and cement is perfect for regular floor traffic usage. This mix comprises a 5:1 ratio of sand to cement. Once it has been laid this 5:1 ratio will dry at a rate of 1mm each day.

Fibre Reinforced Screed - The professional's choice for residential use over the top of under floor heating. This is due to the increased strength and protection against thermal shrinkage and cracking offered by the fibres within the screed. At around one millimetre per day, it has the same setting rate to standard floor screed.

Screeding Quotes Burnham-on-Sea Somerset

Liquid or Self-Levelling Screeds - When a high standard of finish is required this solution of latex and cement is used to create SR1 level screed flooring. Mostly used to finalise a damaged floor or poor substrate level in order to lay a brand new flooring surface, such as tiling on top of it. These can be as little as 1mm thick, and because of the latex polymers, will still provide a high strength finish.

Fast Drying and Advanced Drying Screeds - If you need to progress urgently with the flooring because of time limitations, this screed dries much faster than standard flooring screeds. They're typically a fibre reinforced kind of screed which can dry at a rate of between 3-7mm per day and are used in time dependent flooring projects.

Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading of the floor is required, heavy duty screeds allow for maximum strength and durability.

Polymer Screeds - An extremely high strength flooring solution where a reduced screed thickness is required. The drying times for these vary according to product guidelines.

SCREEDING PREPARATION AND INSTALLATION

Screeding companies will have to fully prepare the area prior to any other work in order to ensure a hard wearing and quality screed flooring. The existing floor surface should be thoroughly cleaned to eliminate any debris, grease, paint and oil which might adversely affect the bond of the screeding.

Screeding Near Burnham-on-Sea (TA8)

If cleaning products have been used it is essential to remove any traces of detergent or soap, and leave the surface to dry naturally. At this stage cracks should be repaired because these can easily travel up through a laid screed and be visible in the completed surface. An on-site survey will allow your Burnham-on-Sea screeding specialist to pinpoint these preparation areas and finish them before commencing to pour the screeding.

Before the screeding can be laid a damp proof membrane (DPM) must be put down to shield the final flooring and screed from moisture. Different thicknesses of special polythene could be used as a damp proof membrane and also act as a barrier for the screed and any insulation panels.

If the area is susceptible to radon gas then an additional barrier is needed to prevent this harmful gas from entering from the ground. An airtight membrane could be sufficient in locations with low radon emissions, however in more severe cases there might need to be a more complicated ventilation and extraction system to block any ground penetrating radon gas.

The final step of surface preparation is the painting or spraying of a sealant or primer. Sealers and primers help with the bonding process and are specialist applications matched to the kind of screed that is being applied. Because of their special nature, only experienced screeding contractors in Burnham-on-Sea should be entrusted with using them safely and correctly and using equipment which is made for the task.

If you are installing underfloor heating, now is the time that it will need to be correctly laid out and installed. The wires and heating pipes are firmly attached to insulation panels to stop any movement and ensure that they are held in the correct position. Warmth will be evenly spread across the floor in a skillfully installed under floor heating system, and with it being an effective choice of heating, it is an ideal choice for the majority of Burnham-on-Sea home renovation projects.

Floor Screed Burnham-on-Sea (01278)

The screeding can now be mixed and prepared on site and spread onto the base. The particular requirements of the room will determine the type of screeding that's used. For advanced and quick drying screeds there'll be at least 24 hours delay before it is able to be walked on, and a further 3 days minimum before you are able to lay any flooring materials. If you're aiming to end up with a properly finished and long-lasting floor surface you should follow the manufacturer's guidelines with regard to heavy duty and standard screeds where this time period will be increased.

Once the screeding has solidified it can be quality checked to verify the SR level. The standard SR test involves the use of a 2m straight edge to check for any variations in the screed surface.

  • SR1 - SR1 is the highest standard and permits only 3mm of disparity from the straight-edge.
  • SR2 - The standard flooring in commercial and industrial builds is classed as SR2 and has a maximum possible deviation of 5 millimetres across the whole screeded floor.
  • SR3 - For a utility area or room where the quality of finish is fairly inconsequential SR3 is the specification and has a deviation measurement of 10mm or less.

It might also be necessary for a structural engineer to carry out a soundness test. This test will establish the overall strength of the screeding and the viability for its intended use. An assessment called the drop hammer test is carried out on various areas of the screed and the results noted. Only qualified structural engineers applying the BS8204 regulations are allowed to carry out these tests and sign off on the structural safety of screed flooring. (Tags: Floor Screeding Burnham-on-Sea, Floor Screed Burnham-on-Sea, Floor Screeding Services Burnham-on-Sea, Screeding Burnham-on-Sea).


Floor screeding services are available in Burnham-on-Sea and also nearby in: Edithmead, Weston-super-Mare, Brent Knoll, Bason Bridge, Watchfield, East Huntspill, Southwick, Mark, Highbridge, Huntspill, Alstone, East Brent, Lympsham, Berrow, Wedmore, Walrow, and in these postcodes TA8 1PA, TA8 2AL, TA8 1PP, TA8 1PX, TA8 1QQ, TA8 1PL, TA8 1EW, TA8 1QT, TA8 1NZ, TA8 1LX. Local Burnham-on-Sea floor screeders will probably have the telephone dialling code 01278 and the postcode TA8. Checking this out will make certain that you access locally based floor screeding. Burnham-on-Sea property owners will be able to utilise these and various other similar services.

Book a Screeder in Burnham-on-Sea UK

Latex Floor Screeds Burnham-on-Sea

When the make-up of your floor's surface means that a certain amount of flexibility is needed, it may be an advantage to apply a latex floor screed, as opposed to one with a more rigid finish. A latex floor screed comes in two parts, a bottle and a bag, with the bag containing a cement powder, and a bottle that contains a liquid latex mixture. Latex screeds are more flexible and quicker drying than other types of screed, as the water that is normally used is exchanged for the latex liquid.

Used in the levelling of sub-floors, this latex compound provides a suitable surface for the installation of your chosen floor finish. This is suitable for subfloors made from quarry tiles, wood, asphalt, sand/cement or concrete, is perfect for the application of adhesives and gives a durable, smooth surface. If your sub-floor has any movement in it, this type of screed will give you a flexible, crack-free finish, onto which your chosen floor coverings can be laid.

Latex screeds are not suitable where a "floating" screed is desired, for example when an unbonded screed is being laid on top of a layer of either thermal or acoustic insulation, such as might be the case when you are screeding over underfloor heating, and thicknesses of 50 to 65 millimetres may be necessary.

Related Tasks

Screeding Related Tasks Burnham-on-Sea

There are a wide array of tasks that can be accomplished by your local Burnham-on-Sea floor screeder including sand and cement floor screed, underfloor heating installations, floor insulation in Burnham-on-Sea, waterproof floor screeding Burnham-on-Sea, cellar floor screeding Burnham-on-Sea, granolithic floor screeds Burnham-on-Sea, cheap screeding in Burnham-on-Sea, floor screeding, final floor finishes, sand floor screed, unbonded screed in Burnham-on-Sea, anhydrite floor screed Burnham-on-Sea, floating screed, damp proof membranes, fast-dry floor screeds in Burnham-on-Sea, floor renovation, underfloor heating screed, substrate floor preparation in Burnham-on-Sea, concrete pumping Burnham-on-Sea, screeding repairs, liquid screeds Burnham-on-Sea, self-levelling screeding, floor preparation, rapid strength screeds, floor screeding tools, and lots more floor screeding tasks. Listed are just some of the duties that are conducted by those installing screeding. Burnham-on-Sea professionals will inform you of their full range of screeding services.

The Tools Required for Screeding Floors

  • Float
  • Dappling Bar
  • Knee Protection
  • Gloves
  • Measure
  • Buckets
  • A Long Spirit Level
  • Trowel
  • Straight Edge
  • Floor Profile
  • Shovel

Burnham-on-Sea Skip Hire Services

Skip Hire Burnham-on-Sea

Let's be honest, most home refurbishments and property makeovers in Burnham-on-Sea often produce quite a bit of waste. Your specific floor screeding project may produce very little waste, and there again it might produce a lot. In many cases the tradesperson you are employing will happily remove the waste that's generated during the course of the work, but beware - some of them certainly don't!

Regardless of whether the tradesman is sorting this out or you're doing it yourself, hiring a skip will frequently be the best waste removal solution. You'll need to choose the correct size of skip, because there are various different sizes on offer. For modest projects there are skip bags and mini-skips, for substantial home renovations and garden clearances there are midi-skips and standard builders skips, and for commercial use or really massive projects, roll-on roll-off skips are the best alternative.

To hire a skip for your project in Burnham-on-Sea, GO HERE for a quote.

BURNHAM-ON-SEA FLOOR SCREEDING QUOTES (TA8)

Floor Screeding Near Burnham-on-Sea

Also find: Berrow floor screeding, Mark floor screeding, Lympsham floor screeding, Alstone floor screeding, East Brent floor screeding, Brent Knoll floor screeding, Walrow floor screeding, East Huntspill floor screeding, Weston-super-Mare floor screeding, Wedmore floor screeding, Edithmead floor screeding, Highbridge floor screeding, Bason Bridge floor screeding, Watchfield floor screeding, Southwick floor screeding, Huntspill screeding services and more. Most of these towns and villages are catered for by companies who do floor screeding. Burnham-on-Sea home and business owners can get estimates by going here.

Floor Screeding Services Burnham-on-Sea

Find Floor Screeding in Burnham-on-Sea Here
Screeding Services in Burnham-on-Sea Somerset (01278)
  • Burnham-on-Sea Indistrial Screeding
  • Burnham-on-Sea Residential Floor Screeding
  • Burnham-on-Sea Underfloor Heating Installations
  • Burnham-on-Sea Floor Damp Proofing
  • Burnham-on-Sea Liquid Screeds
  • Burnham-on-Sea Screeding Services
  • Burnham-on-Sea Floor Levelling
  • Burnham-on-Sea Floor Screeding
  • Burnham-on-Sea Screed Calculator Service
  • Burnham-on-Sea Fast-Dry Screeding
  • Burnham-on-Sea Polished Screed Floors
  • Burnham-on-Sea Screeding Advice
  • Burnham-on-Sea Cheap Screeding
  • Burnham-on-Sea Fibre Reinforced Floor Screeding

Screeding Around Burnham-on-Sea: Floor screeders were recently required by folks living in Corsham Drive, Creswick Way, St Johns Road, Deacon Way, Sandhills Drive, Steart Avenue, Brambles Road, Bathurst Close, Blythe Way, Barrington Road, College Street, Church Road, Dunstan Road, Archer Drive, Barrie Way, Berrow Road, Trinity Rise, St Lukes Close, Beale Way, Cowan Close, South Esplanade, Seaview Road, Ashley Avenue, Bay View Gardens, Abingdon Street, Trinity Close and these Burnham-on-Sea postcodes: TA8 1PA, TA8 2AL, TA8 1PP, TA8 1PX, TA8 1QQ, TA8 1PL, TA8 1EW, TA8 1QT, TA8 1NZ, TA8 1LX. Work was undertaken in these places by specialists in screeding. Burnham-on-Sea residents enjoyed trusted and dependable floor screeding services.

If you want local info relating to Burnham-on-Sea, Somerset look here

Floor screeding in TA8 area, 01278.

TOP - Floor Screeding Burnham-on-Sea

HOME - FLOOR SCREEDING UK

(This screeding Burnham-on-Sea content was written by S Locke 15-11-21)