Floor Screeding Pewsey

Pewsey Screeding & Floor Levelling Services

Floor Screeding Pewsey Wiltshire (SN9): If you are restoring a property or basement, are looking to install under floor heating or have an uneven or damaged floor, then you'll be needing to find a professional floor screeding contractor to assist you. Floor screeding delivers a smooth, level finish to a basic sub-base floor, and enables you to lay your final layer of flooring material, (carpets, tiles, boards etc) over it. To guarantee a durable and quality finish to the whole floor surface, screeding is a key procedure.

Free Pewsey Floor Screeding Quotes


Having all of the knowledge and experience to help you achieve a perfectly finished floor in whichever size or shape of room you are renovating, an experienced floor screeding contractor in Pewsey is the best choice for your floor screeding project. After a careful assessment of your flooring project, they will be in a position to advise you on which method of laying is most suitable for your circumstances, and which is the perfect type of screed.

Floor Screeding Pewsey Wiltshire (SN9)

They'll in addition assess if a structural engineer is needed to ensure any point loadings, load bearing and flex strength are satisfied as outlined by construction and building regulations.

Qualified and skilled workers are essential to a successful outcome and will extend the life of your floor by using the right form of screed for the intended purpose of your room. The correct mix of screed and the way it is laid is also vital to ensure the ultimate durability of your floor surface.

Before choosing a floor screeding contractor from any based in the Pewsey area, ask to what standard of finish they are basing their quote, and also make sure you get multiple quotes. The Surface Regularity (SR) finish is the figure to watch out for when reviewing an estimate from Pewsey screeding companies. SR1 is the best standard, and while SR2 and SR3 might seem cheaper initially, they don't guarantee a perfectly even or flat surface. An SR2 or SR3 level could mean there will be ridges or flat spots that may cause problems when installing your final flooring surface (wood, carpet, tile etc).

Floor Screeders Pewsey (01672)

British Standards BS8204 sets down the guidelines and regulations that all Pewsey screeding installers are required to follow, and if using specialist screeding solutions, (Gypsol, Cemfloor, Flowcrete etc), they should be certified by the manufacturers as being skilled and trained in their use. A company holding accreditation proves they have been assessed and trained in the use of these products and can provide a top notch service in all areas of their installation.

Pewsey commercial screeders will be involved in floor screeding in hospitals, shopping centres, factories, warehouses, restaurants and schools.


Standard Screeds - A combination of sand and cement which is good for everyday residential usage. This mix uses a 5:1 ratio of sand to cement. The standard screed will dry at a rate of 1mm thickness each day.

Industrial and Heavy Duty Screed - Designed for maximum durability and strength in places where traffic is expected to be high or specific loading of the floor is needed.

Polymer Screeds - These provide a high level of strength with a lower thickness. On account of their different chemical compositions, these polymer screeds have varying setting times which can be verified by checking manufacturer's product guidelines.

Fast Drying and Advanced Drying Screeds - As the name suggest, this screed dries at a quicker rate and allows you to use the screeded area much sooner. Drying out at a rate of 3-7mm/day, determined by the specialised mix, they are generally a fibre reinforced type of screed and are great for flooring projects which have tight schedules.

Fibre Reinforced Screed - The professional's choice for residential use on top of underfloor heating. The fibres in this screed increase it's strength and durability while also protecting against thermal cracking and shrinkage. At about 1mm per day, it has the same setting rate to standard floor screed.

Self-Levelling or Liquid Screeds - Used to provide the highest quality of finish, especially where SR1 levels are essential, by a latex and cement compound. It is primarily used to provide a high quality floor over the top of a poor quality or damaged substrate and enables all types of flooring materials to be used. Even with a depth of 1mm, the latex polymers within the screed provide a high strength surface for a wide variety of uses.

Screeding Quotes Pewsey Wiltshire


To enable the screeding to be of a high quality finish that is hard wearing and durable, time should be devoted to carefully preparing the area before any screed is poured. The existing floor surfaces should be cleaned to eradicate any paint, grease, oil and debris that might affect the adhesion of the screed.

Screeding Near Pewsey (SN9)

Any cleaning chemicals which are used during this stage shouldn't leave any residues, and the floor surface must be permitted to dry by itself naturally. If screeding over a cement or stone floor all cracks should be mended to prevent them from "travelling" through the screed layer and resulting in deviations on the final surface. An on-site survey will allow the screeding specialist to highlight this preparation work and complete it before beginning to pour the screeding layer.

To protect the flooring materials and screed layer from dampness rising up through the ground, a damp proof membrane (DPM) must be installed. There might be two or three layers of different thickness polythene to act as barriers between the screed and the insulation layer.

If the area is at risk from radon gas then an additional barrier is required to stop the gas from entering via the ground. If radon gas occurs in severe doses then a complete ventilation and extraction system might be needed under the layer of screed which will remove any gases that are seeping in from ground level.

The final phase of the surface preparation process is the painting or spraying of a primer or sealant. Primers and sealers help with the bonding process and are specialist applications matched to the type of screed that is being applied. Devices such as airless sprays can be used to apply a sealant or primer, by certified screeding installers in Pewsey observing the manufacturer's guidelines.

If you are installing under floor heating, this is the time that it will need to be correctly laid out and installed. Insulation panels can be put in place and the cabling and heating pipes will be firmly fastened so that there is no movement whilst the screed is poured. Underfloor heating is one of the most efficient ways to heat a room and a properly installed system should provide even warmth in all areas of the floor.

Floor Screed Pewsey (01672)

The screeding can now be mixed and prepared on site and spread onto the base surface. The particular requirements of the room will dictate the sort of screeding used. For advanced and quick drying screeds there'll be at least twenty four hours delay before it is able to be walked over, and a further 72 hours minimum before you can install any flooring materials. If you're laying heavy duty or standard screeds the curing time is longer and the manufacturer's guidelines must be followed so as to get the best possible finish for your floor.

As soon as the screeding has set it can be checked for quality to ascertain its SR level. The basic SR test uses a two metre straight edge to check for any deviations in the screed surface.

  • SR1 - SR1 is the best specification and permits only three millimetres of disparity from the straight-edge.
  • SR2 - The standard flooring in commercial and industrial builds is classed as SR2 and has a maximum deviation of five millimetres across the entire floor surface.
  • SR3 - SR3 is basic utility standard where a quality finish isn't required. This classification allows for a maximium deviation depth of ten millimetres.

If your screed floor has been laid with particular loading in mind then a qualified structural engineer is going to be required to carry out the tests. Using specialist equipment the engineer will establish the screeded surface strength and viability of use in a load bearing setting. An assessment called the drop hammer test will be conducted at several areas on the screed and the results noted. Any screed floor that has load bearing requirements must be approved by a trained structural engineer respecting the BS8204 guidelines. (Tags: Floor Screed Pewsey, Screeding Pewsey, Floor Screeding Pewsey, Floor Screeding Services Pewsey).

Book a Screeder in Pewsey UK

Floor screeding is available in Pewsey and also in nearby places like: Manningford Abbots, East Stowell, Manningford Bohune, Manningford Bruce, Southcott, Upavon, Easton Royal, Clench, Fyfield, Wilcot, Wilsford, West Stowell, Milton Lilbourne, Lower Everleigh, Sharcott, and in these postcodes SN9 5ED, SN9 5ER, SN9 5HT, SN9 5AR, SN9, SN9 5JA, SN9 5EY, SN9 5AY, SN9 5DZ, and SN9 5DN. Locally based Pewsey floor screeders will likely have the telephone code 01672 and the postcode SN9. Verifying this can make certain that you're accessing locally based floor screeding. Pewsey homeowners can utilise these and numerous other building related services. If you would like to obtain a quotation for screeding services, you can easily do so by clicking on the "Quote" banner.

Latex Floor Screed Pewsey

When a certain amount of flexibility is needed in the surface of a floor you may find that the use of a latex self-levelling floor screed will be an advantage. Usually coming in two parts, latex floor screeds comprise a cement-based smoothing compound, and a liquid latex mixture. The latex liquid additive replaces the water that would normally be used in a screed mix, and is more flexible and quicker drying than other types of screed.

This latex product is used for levelling sub-floors in advance of the laying of the final decorative surface. Appropriate for substrate of sand/cement, wood, asphalt, concrete and stone tiles, this screed gives a perfect surface for the application of flooring adhesives that is smooth and resilient. If your subfloor has any movement in it, this type of latex screed will still give you a flexible, crack-free finish, on which your final floor coverings can sit.

When using a "floating" screed, for example when screeding is being laid on top of underfloor heating, thicknesses of 50 to 75 millimetres may be required, and latex floor screeds are not suitable in this case. (Tags: Latex Screeds Pewsey, Latex Screed Pewsey, Latex Floor Screed Pewsey, Latex Screeding Pewsey).

Coloured Floor Screeds

The type of flooring material known as coloured floor screeds is mostly found in commercial or industrial settings. To create a distinctive and decorative finish, coloured resins, aggregates, and sealants are blended together to form these screeds. Their durability and slip-resistant properties make them a popular choice for areas with heavy footfall or machinery.

To match the brand of a business or create a specific aesthetic in a space, multi-coloured screeds can be customised. They are also easy to keep clean and maintain, making them a popular choice for facilities that require a high level of hygiene. In addition, multi-coloured screeds offer a seamless finish that eliminates any grout lines or joints, making it a good choice for cleanroom environments. Coloured screeds allow architects and designers to select aggregates based on colour, shape and size, giving them the freedom to create bespoke flooring designs tailored to their project requirements. All in all, multi-coloured screeds are a versatile and practical flooring solution that can add both style and function to any commercial or industrial space.

Granolithic Screeding Pewsey

Granolithic screeding is a process of creating an even and smooth surface for floor coverings like carpets or tiles. It involves mixing sand, cement, and aggregate such as marble or granite chips to form a mixture, which is then applied to a concrete base. The mixture is levelled with a straightedge to give it a smooth, seamless surface.

The resulting flooring is slip-resistant, easy to clean and hard-wearing, making it ideal for use in areas with high foot traffic, such as schools, factories and shopping centres.

The granolithic screeding process involves a number of steps, including preparation of the concrete sub-base, mixing of the screed mixture, laying of the mixture, and curing of the screed. Correct mixing, application and curing methods are vital to ensure the strength and durability of the final surface. Moreover, the screed should be allowed to cure fully before any further flooring materials are laid on top of it.... READ MORE. (Tags: Granolithic Screeds Pewsey, Granolithic Floor Screeding Pewsey, Granolithic Screeding Pewsey)

Screed Floor Removal

Screed floor removal is a process that is crucial in renovation and construction. It is used to strip away existing screed layers from floor surfaces. This procedure is essential for the refurbishment or upgrading of a floor. It prepares the surface for the new flooring material or other improvements.

This complex task can be safely and effectively performed by specialist contractors who have the experience and expertise in this kind of work. A new lease of life for your floor is set by the safe and successful elimination of the old screed, which is guaranteed by their proficiency. The significance of this fresh start is manifold, including repairs, changes in design and upgrades.

Screed Floor Removal Pewsey

Specialist equipment and techniques are used for screed floor removal, ensuring that the job is done quickly and efficiently. Meticulous assessment of the existing screed's type, thickness, and the applied surface is essential. Careful attention to detail is the key to successful removal with minimal damage to the underlying structure.

When removing floor screed, you have the opportunity to address any underlying issues that might have arisen over the years, which is a key benefit. If the old layer of screed is uneven, damaged, or otherwise compromised, its removal allows for a thorough inspection of the substrate. New flooring materials can be safely installed after flooring specialists have completed this inspection and rectified any structural challenges.

In addition to that, in the process of installing an underfloor heating system in Pewsey, the first essential task is the removal of any existing screed. A conducive surface for the installation of heating elements is created by contractors through the removal of the current screed, ensuring it is clean and level. This establishes a pathway for a highly efficient and effective underfloor heating setup, which enhances the overall comfort and energy efficiency of the space.

The removal of screed flooring is aligned with sustainability objectives, emphasising waste reduction and reusability. The removal process's environmental impact can often be reduced through the recycling or repurposing of the screed for use in other construction activities.

In a nutshell, within the field of construction and renovation, the removal of screed floors is a complex and crucial process. Professional contractors, with expertise, are required to negotiate the challenges of removing old layers of screed while ensuring the integrity and safety of the underpinning structure. Screed floor removal, plays an important role in the creation of long-lasting, efficient, and aesthetically pleasing flooring solutions in a range of different settings in Pewsey, and enables a new beginning for the floor. (85754 - Screed Floor Removal Pewsey)

Related Tasks

Screeding Related Tasks Pewsey

There is a range of work that can be undertaken by your local Pewsey floor screeder including floor screeding, sand and cement screed, latex floor screed, floating screed, floor screeding tools, office floor screeding, screeding quotes, fibre reinforced screeding, floor preparation services in Pewsey, sand screeding, resin floor screeds Pewsey, waterproof screeding, granolithic screeds, final floor finishes in Pewsey, monolithic screeding Pewsey, anhydrite floor screeding in Pewsey, basement floor screeding, commercial floor screeding, liquid screeding, polished concrete flooring, bonded screed, screed aftercare Pewsey, self-levelling screeding, acoustic flooring, screed flooring, screed pump hire, wet room floors, acid etching concrete in Pewsey, pumped screeds Pewsey, flow screeding, floor screed testing, cheap screeding, screed surveys & testing Pewsey, subfloor repair, concrete toppings, and lots more floor screeding tasks. Listed are just a small portion of the activities that are conducted by people specialising in screeding. Pewsey contractors will tell you about their full range of services.


Floor Screeding Near Pewsey

Also find: Fyfield floor screeding, Upavon floor screeding, Sharcott floor screeding, Manningford Bruce floor screeding, Lower Everleigh floor screeding, Clench floor screeding, West Stowell floor screeding, Manningford Abbots floor screeding, East Stowell floor screeding, Southcott floor screeding, Wilsford floor screeding, Manningford Bohune floor screeding, Milton Lilbourne floor screeding, Easton Royal floor screeding, Wilcot floor screeding and more. These and other towns and communities are serviced by screeding specialists and associated tradesmen and women. For delivering top-quality flooring services, these competent specialists have the knowledge and expertise required. Their proficiency in screeding for residential and commercial properties ensures that the task complies with the highest possible standards. By clicking here, screeding quotes are available to local householders.

Floor Screeding Services Pewsey

Find Floor Screeding in Pewsey Here
Screeding Services in Pewsey Wiltshire (01672)
  • Floor Insulation
  • Screeding Services
  • Domestic Floor Screeding
  • Fast-Dry Floor Screeding
  • Decorative Floor Screeding
  • Bathroom Screeding
  • Underfloor Heating Installation
  • Structural Screeds
  • Floor Screeding
  • Floor Levelling
  • Liquid Screeds
  • Floor Screeding Advice
  • Cheap Floor Screeding
  • Polished Screed Floors

Screeding Jobs Pewsey: Find screeding jobs near Pewsey by clicking here: Screeding Jobs Pewsey

For the latest local Pewsey info go here

Floor screeding in SN9 area, and dialling code 01672.

TOP - Floor Screeding Pewsey

Underfloor Heating Pewsey - Commercial Screeding Pewsey - Floor Screeding Pewsey - Floor Screeding Contractors Pewsey - Self-Levelling Screed Specialists Pewsey - Screeder Pewsey - Screeding Services Pewsey - Floor Levelling Services Pewsey - Domestic Screeding Pewsey


(This screeding Pewsey article was written on 22-05-2024)