Floor Screeding Shepton Mallet

Shepton Mallet Screeding & Floor Levelling Services

Floor Screeding Shepton Mallet Somerset (BA4): When you are renovating your Shepton Mallet property with damaged or uneven floors, or maybe converting a basement or cellar into a functional living space, an established floor screeding specialist can offer you a firm starting point. Before you're able to lay a suitable floor covering, be it tile, carpet or wood, the floor base needs to be as flat as possible; which is why screeding a floor is essential. The screeding is a crucial procedure to ensure a durable and quality finish to the whole floor surface.

Free Shepton Mallet Floor Screeding Quotes


It does not matter how big or small the room you need to be levelled, a trustworthy floor screeding specialist in Shepton Mallet will have the essential expertise, knowledge and equipment to offer you an excellent standard of service. They'll be able to assess the project and figure out the correct type of screed you require and how best to apply it.

Floor Screeding Shepton Mallet Somerset (BA4)

Your screeding company will also inform you if a structural engineer is needed for your project, in order to evaluate point loadings, flex strength and load bearing that your screed floor might require to conform with building regulations and British Standards.

Bringing in a highly trained and qualified flooring specialist will guarantee that you use the proper form of screed for the room's allocated purpose and get the optimum lifespan out of your flooring. A correct blend of screed and the way it is laid is also critical to ensure the final quality of your floor.

There are numerous screeding companies in the Shepton Mallet area so try to get multiple quotes for your screeding project before picking out a contractor and know to what standard of finish it's for. For domestic homes a quote will normally be provided for a Surface Regularity (SR) standard of SR1 or SR2. SR2 and SR3 will be cheaper options, but the finished floor surface may have deviations and errors, whilst SR1 guarantees a perfect quality of finish. This means that you might have to correct any areas that may cause issues when putting down your final flooring solution.

Floor Screeders Shepton Mallet (01749)

All Shepton Mallet screeding contractors must follow British Standards (BS8204) and ought to have some kind of accreditation from the manufacturers of specialised screeding materials and equipment, e.g. Gypsol, Cemfloor, Flowcrete. A contractor holding accreditation shows that they've been assessed and trained in using these screeding products and can provide a high standard of service in all areas of their installation.

Commercial screeders in Shepton Mallet will probably tackle screeding projects in pubs, warehouses, hospitals, factories, schools and shopping centres.


Standard Screeds - A blend of sand and cement which is ideal for regular residential use. The ratios involved in standard screeds are 5 parts sand to 1 part cement. After laying a standard flooring screed dries out at a rate of just 1mm/day.

Self-Levelling or Liquid Screeds - When the highest possible standard of finish is required this blend of cement and latex is employed to produce SR1 quality screeding. The self-levelling compound provides a clean and level surface over a damaged floor or rough substrate to allow all flooring materials to be laid. Even with a depth of just 1mm, the latex polymers within the screed provide a high strength surface for a wide variety of uses.

Screeding Quotes Shepton Mallet Somerset

Fibre Reinforced Screed - The favoured choice by professional installers for use in combination with underfloor heating systems. The improved strength and flexibility provided by the special fibres in this screed help protect the resulting floor from cracking and shrinkage due to heat. It sets at an identical rate to a standard screed, at about 1mm per day.

Fast Drying and Advanced Drying Screeds - As the name suggest, these screeds dry rapidly and allow you to use the floor area much sooner. Drying out at a rate of 3-7mm/day, depending on the mixture, they are normally a fibre reinforced screed and are great for projects which have tight schedules.

Polymer Screeds - When a decreased thickness of floor is necessary on account of building requirements, a polymer screed provides a high strength solution to this situation. Due to their different chemical compositions, polymer screeds have varying drying times which you can verify by reading manufacturer's guidelines.

Industrial and Heavy Duty Screed - Designed for maximum durability and strength on floors where traffic is expected to be high or heavy loading on the floor is required.


Preparation is essential for a high quality screed surface that will be durable and hard wearing. The existing floor surface should be thoroughly cleaned to eliminate any oil, paint, grease and debris which can adversely affect the adhesion of the screed.

Screeding Near Shepton Mallet (BA4)

If any products are used during this stage it's vital to ensure that no residues of soaps or detergents are left on the surface and it's permitted to dry out naturally. If screeding over a stone or cement floor any cracks should be mended to stop them from "travelling" through your screed layer and causing imperfections on the final floor surface. A site survey will allow the screeding specialist to identify this preparation work and complete it before starting to apply the screed layer.

A damp proof membrane (DPM) will be applied after the preparation work has been completed to prevent ground dampness affecting the flooring materials and screeding. There might be two or three layers of varying thickness polythene to act as barriers between the screed and the insulation layer.

If your property is located in a place where radon gas is present an additional barrier layer is necessary to prevent radon gas from getting through. If radon occurs in severe doses then a complete extraction and ventilation system might be needed under the layer of screed which will remove any gases that are seeping in from the ground.

Once these stages have been completed the screeding company will apply a sealant or primer to the prepared floor base. A primer assists in the screed bonding correctly to the base surface and different varieties exist based upon which screed type is being applied. Because of their specialist nature, only qualified screeding contractors in Shepton Mallet should be entrusted with using them safely and correctly and through the use of equipment that's made for the task.

Underfloor heating can now be laid out, installed and tested before screeding is applied. Insulation panels will be laid out and the wires and heating pipes will be firmly fastened to prevent any movement whilst the screed is applied. When expertly installed an under floor heating system is an efficient way to warm up a room and decent quality screeding retains its heat, generating an even level of warmth across the floor.

Floor Screed Shepton Mallet (01749)

The screeding can now be mixed and prepared in situ and applied to the base surface. The requirements of the room will dictate the type of screeding that is used. For quick drying screeds there will be at least 24 hours delay before it is able to be walked on, and a further 3 days minimum before you can install any flooring materials. If you are using standard or heavy duty screeds the setting time is longer and the manufacturer's guidelines must be adhered to in order to get the best finish for your floor.

You can check the SR level of the finished screed once it is solidified enough to walk on. The test involves the use of a two metre straight edge laid down upon the surface and any deviations from true are measured.

  • SR1 - Over the entire area, if there aren't any deviations greater than three millimetres from the straight-edge, you've got a top quality SR1 specification surface.
  • SR2 - If the floor deviates from the straight edge by 5mm or less it is SR2 quality and is the standard for industrial and commercial floors.
  • SR3 - If the deviation is 10 millimetres or less the screed quality is specified as SR3 and is suitable for garage and utility areas.

There might also be a requirement for a qualified structural engineer to conduct a soundness test. Using specialist equipment the engineer will evaluate the screeding strength and viability of use in a load bearing setting. An assessment called the "drop hammer test" is conducted at several areas on the screed layer and the outcomes recorded. Any screeding that's got load bearing requirements must be sanctioned by a certified structural engineer applying the BS8204 regulations. (Tags: Screeding Shepton Mallet, Floor Screeding Services Shepton Mallet, Floor Screed Shepton Mallet, Floor Screeding Shepton Mallet).

Floor screeding services are available in Shepton Mallet and also nearby in: Pilton, South Horrington Village, Downside, Evercreech, Ham, North Wootton, Cranmore, Doulting, Charlton, Croscombe, Oakhill, Stoke St Michael, West Shepton, Bowlish, Darshill, and in these postcodes BA4 5EQ, BA4 5BB, BA4 5DX, BA4 4EX, BA4 5BN, BA4 4DA, BA4 5HB, BA4 5DR, BA4 5GH, BA4 4HF. Local Shepton Mallet floor screeders will probably have the telephone dialling code 01749 and the postcode BA4. Checking this should make sure that you are accessing local screeding. Shepton Mallet home and business owners will be able to benefit from these and lots of other similar services.

Book a Screeder in Shepton Mallet UK

Related Tasks

Screeding Related Tasks Shepton Mallet

There is a range of work that can be completed by your local Shepton Mallet floor screeding specialist including polished screeding in Shepton Mallet, quick-dry floor screeds Shepton Mallet, concrete pumping, floor screed testing Shepton Mallet, floor insulation, substrate floor preparation, sand and cement screeds, garage screeding, domestic screeding, bonded screed, structural screeds, conservatory floor screeding Shepton Mallet, screed aftercare, final floor finishes, unbonded screed in Shepton Mallet, polished screed flooring, concrete screed, screed repairs, industrial floor screeding, screed testing Shepton Mallet, screed reinforcement in Shepton Mallet, granolithic screeding in Shepton Mallet, external screeding in Shepton Mallet, resin floor screeds Shepton Mallet, underfloor heating screeds in Shepton Mallet, floor noise dampening, waterproof screeding in Shepton Mallet, floor preparation services, and more floor screeding tasks. These are just some of the tasks that are handled by those installing screeding. Shepton Mallet specialists will tell you about their full range of floor screeding services.

Floor Screeding Tools

  • Buckets
  • Float
  • Spirit Level
  • Trowel
  • Straight Edge
  • Tape Measure
  • Gloves
  • Floor Profiler
  • Shovel
  • Spiked Roller
  • Knee Protectors

Floor Screeding Near Shepton Mallet

Also find: West Shepton floor screeders, Evercreech floor screeders, Doulting floor screeders, Darshill floor screeders, Charlton floor screeders, Stoke St Michael floor screeders, Ham floor screeders, Oakhill floor screeders, Croscombe floor screeders, South Horrington Village floor screeders, Downside floor screeders, Cranmore floor screeders, North Wootton floor screeders, Bowlish floor screeders, Pilton screeding services and more. Most of these villages and towns are serviced by companies who do floor screeding. Shepton Mallet homeowners can get estimates by clicking here.

Floor Screeding Services Shepton Mallet

Find Floor Screeding in Shepton Mallet Here
Screeding Services in Shepton Mallet Somerset (01749)
  • Shepton Mallet Screeding Advice
  • Shepton Mallet Fibre Reinforced Screeding
  • Shepton Mallet Cheap Floor Screeding
  • Shepton Mallet Floor Screeding
  • Shepton Mallet Liquid Screeds
  • Shepton Mallet Screed Calculator Service
  • Shepton Mallet Floor Insulation
  • Shepton Mallet Fast-Dry Screeding
  • Shepton Mallet Floor Levelling
  • Shepton Mallet Floor Damp Proofing
  • Shepton Mallet Commercial Screeding
  • Shepton Mallet Screeding Services
  • Shepton Mallet Underfloor Heating Installation
  • Shepton Mallet Polished Screed Floors

Screeding Around Shepton Mallet: People who live in the following streets and roads have recently inquired about floor screeding services - Gaol Lane, Berryman Close, Charlton Close, Dennett Close, Hawthorn Crescent, Lower Lane, Clover Ground, Yeomanry Way, Douglas Drive, Domus Drive, Trajan's Way, Park Road, Bolter's Lane, Great Ostry, Prince's Road, Station Road, Westway Lane, Somerville Close, Tallowood, Lockey Road, Lime Grove, Garston Street, Strode Way, Pike Hill, Long Acre, Whitstone Close, Hyatt Place, Hillmead, as well as these local Shepton Mallet postcodes: BA4 5EQ, BA4 5BB, BA4 5DX, BA4 4EX, BA4 5BN, BA4 4DA, BA4 5HB, BA4 5DR, BA4 5GH, BA4 4HF. Work was executed in these places by specialists in floor screeding. Shepton Mallet home and property owners were given high quality and reliable screeding services.

To read local information regarding Shepton Mallet, Somerset check here

Floor screeding in BA4 area, telephone code 01749.

TOP - Floor Screeding Shepton Mallet


(This screeding Shepton Mallet page was generated by Steve Locke 30-06-2022)