Floor Screeding Billingshurst West Sussex (RH14): If you are restoring a property or basement, are hoping to install under floor heating or have an uneven or damaged floor in your Billingshurst property, then it's the perfect time to consider bringing in a professional floor screeder. A screed is used to generate a smooth floor surface over a concrete sub-base and provide a firm foundation for your choice of top flooring material. Floor screeding can provide a high quality and durable finish for almost any room.
FLOOR SCREEDING COMPANIES BILLINGSHURST
It doesn't matter how large or small the area is that you need levelling, a genuine screeding specialist in Billingshurst will have the appropriate equipment, know-how and skills to give you a superb level of service. They will be able to advise you on the correct kind of screed that your project requires, and the best methods for applying and installing it.

It may be a requirement, based on the intended use of the room, for a survey by a structural engineer to conform to building regulations on point loadings, load bearing and flex strength of the screed floor.
A skilled and qualified work force is necessary for a successful outcome and will extend the lifespan of your floor through the use of the correct form of screed for the proposed purpose of your room. A correct blend of screed and the methods used for laying it are also critical to guarantee the final durability of your floor surface.
Make sure that you get more than one quote for your Billingshurst screeding project and also ask to what standard you're getting a quote. For domestic homes a quotation will usually be provided for a Surface Regularity (SR) level of SR1 or SR2. SR1 is the highest standard, and while SR2 and SR3 might be cheaper initially, they don't guarantee a perfectly flat or even floor surface. An SR2 or SR3 standard may mean there are flat spots or ridges that may cause issues when installing your final flooring materials.

The guidelines and regulations laid down in the British Standards BS8204 must be followed by any Billingshurst floor screeding contractor and they should also hold accreditation with the manufacturers of any specialist screeding materials (Flowcrete, Gypsol, Cemfloor etc.) to confirm their safe working practices and competence. The training and assessment of a floor screeding contractor by a manufacturer is underlined through the accreditation scheme, and guarantees reliability and safe working practices on any project which involves their materials.
Commercial screeders in Billingshurst will probably undertake screeding projects in warehouses, schools, factories, shopping centres, hospitals and salons.
TYPES OF SCREED
Standard Screeds - This is perfect for normal residential use and is a mix of cement and sand. This mixture comprises a 5:1 ratio of sand to cement. The standard flooring screed will dry at a rate of one millimetre thickness each day.
Self-Levelling or Liquid Screeds - A latex and cement mixture which can produce the highest standard of finish to SR1 levels. It is mostly needed to provide a smooth, level floor over a poor quality or damaged substrate and results in a surface onto which all forms of flooring materials can be laid. They can be as little as one millimetre in depth, and because of the latex polymers, will still provide a high strength finish.
Industrial and Heavy Duty Screed - A screed designed for heavy traffic and high load areas where maximum strength and durability is very important.
Fibre Reinforced Screed - The preferred option for professionals where under floor heating is being installed in residential homes in Billingshurst. The fibres in this screed mix increase it's durability and strength whilst also protecting against thermal cracking and shrinkage. It has a drying rate of 1mm per day.
Advanced Drying and Fast Drying Screeds - If you need to use the area as soon as possible a fast drying screed can be utilised. The majority of the fast or advanced drying screeds are fibre reinforced and are ideal for a wide array of projects where the faster drying rate of 3-7mm is an advantage.
Polymer Screeds - These provide an extremely high level of strength with a lower thickness. The setting times vary according to product guidelines.
SCREEDING PREPARATION AND INSTALLATION
To enable the screeding to be of a high quality finish that's durable and hard wearing, time must be spent on fully preparing the area before any screed is poured. It is important that all contaminants such as oil, paint, grease or debris is removed from the floor before laying any screed, as these can affect the bonding capability that a good quality screed requires.

If cleaning products have been used it's vital to remove any traces of soap etc, and allow the floor surface to dry naturally. At this point cracks need to be repaired since these can travel up through a laid screed and be visible in the finished floor surface. An experienced Billingshurst screeding contractor will address such issues during the on-site survey and make certain that all preparations are finished before moving on to the next steps in the screeding process.
A damp proof membrane (DPM) will be put down after the preparation work has been finished to stop ground dampness getting into the flooring materials and screeding. Different thicknesses of special polythene could be used as a damp proof membrane and also serve as a buffer for the screed and any insulation panels.
If the area is susceptible to radon then one additional barrier is necessary to prevent this harmful gas from entering from the ground. If radon gas occurs in severe doses then a full ventilation and extraction system might be needed under the screed which will remove any gases that are seeping in from the ground.
As soon as these steps have been taken the screeding company will put on a primer or sealant to the prepared base. Sealers and primers help with the bonding process and are special applications according to the sort of screed being used. These materials require experienced tradesmen to apply them in the appropriate ratios by using airless sprays and other tailor-made equipment.
Before the screeding can be poured, any underfloor heating will now set out and installed. Insulation panels can be arranged and the heating pipes and wires will be firmly mounted so there's no movement while the screed is applied. Underfloor heating is one of the most effective ways to heat a room and an expertly installed system should produce even warmth in all areas of the floor.

The screed can now be prepared in situ and applied to the floor surface. Your use of the room will assist your screeding specialist on which type of screed is ideal for your needs. Be aware that even advanced and quick drying screeds have a minimum of twenty four hours before you can walk over any laid surfaces and at least 72 hours before any flooring materials can be laid. If you're using heavy duty or standard screeds the curing time is increased and you should follow the manufacturer's guidelines so as to get the best finish to your floor.
You can test the SR level of the completed screed as soon as it is set enough for walking on. The standard SR test uses a 2m long straight-edge to check for any variations in the floor surface.
- SR1 - SR1 is the best specification and allows just three millimetres of deviation from the straight-edge.
- SR2 - If the screed has a deviation from the straight-edge of 5 millimetres or less it is SR2 quality and is the normal standard for commercial and industrial floors.
- SR3 - For a utility area or room where the finish is fairly unimportant SR3 is the standard and should have a maximum deviation measurement of 10 millimetres or less.
It may also be necessary for a structural engineer to conduct a soundness test. The testing will make sure that your new screed surface is suitable for the load bearing requirements laid out in the original site survey. This will include what is known as a drop hammer test which records specific data on the strength and flexibility of the screed. Only fully qualified structural engineers observing the British Standards BS8204 guidelines are allowed to carry out such tests and sign off on the structural integrity of screed flooring. (Tags: Floor Screeding Billingshurst, Floor Screeding Services Billingshurst, Floor Screed Billingshurst, Screeding Billingshurst).
Floor screeding services are available in Billingshurst and also in nearby places like: Adversane, Barns Green, Coolham, Shipley, Kirdford, Itchingfield, Gay Street, Coneyhurst, North Heald, Wisborough Green, Brooks Green, Five Oaks, Parbrook, Slinfold, and in these postcodes RH14 9JU, RH14 9SB, RH14 9NU, RH14 9RZ, RH14 9NF, RH14 9EN, RH14 9HJ, RH14 9NG, RH14 9HP, RH14 9EE. Local Billingshurst floor screeders will probably have the telephone dialling code 01403 and the postcode RH14. Verifying this will make certain that you access locally based screeding. Billingshurst homeowners will be able to utilise these and many other related services.
Latex Screeds Billingshurst
When the characteristics of your floor's surface means that a certain degree of flexibility is needed, it may be best to use a latex screed, rather than one with a more rigid finish. Latex floor screeds come in two parts - a bag and a bottle - with a bottle that contains liquid latex, and a bag that contains a cement powder. The water that is normally used in a screed mix is replaced by the liquid latex, meaning that it's more flexible than other types of screed, and quicker drying.
This latex screed compound is used to level a subfloor before the final decorative surface is laid. Suitable for subfloors of concrete, quarry tiles, asphalt, sand/cement and wood, this gives the ideal surface for the application of flooring adhesives which is durable and smooth. This latex screed will give you a flexible, crack-free finish, even if there happens to be a bit of movement in your sub-floor.
Latex floor screeds are not suitable where a "floating" screed is needed, for example when an unbonded screed is being laid on the top of a membrane of either thermal or acoustic insulation, such as might be the case when you're screeding on top of underfloor heating, and screed depths of 50mm-75mm may be required.
Related Tasks

There is a range of work that can be conducted by your local Billingshurst floor screeding specialist including domestic screeding, garage screeding Billingshurst, sand screeds, granolithic screeds, floor preparation services, screed reinforcement, substrate floor preparation, self-levelling floor screeding Billingshurst, waterproof floor screeding in Billingshurst, floor renovation in Billingshurst, underfloor heating screed, factory floor screeding in Billingshurst, floor noise reduction Billingshurst, floating screed in Billingshurst, liquid screeds, sand and cement floor screeding, acoustic flooring solutions, conservatory floor screeding, concrete screeding, bonded screed, cellar floor screeding, unbonded screed, polished screed flooring, rapid strength floor screeds in Billingshurst, external screeding Billingshurst, structural screeds, floor insulation, floor screed testing, and lots more floor screeding tasks. Listed are just a few of the activities that are carried out by those installing screeding. Billingshurst professionals will let you know their entire range of screeding services.
Floor Screeding Near Billingshurst
Also find: North Heald floor screeding, Kirdford floor screeding, Brooks Green floor screeding, Wisborough Green floor screeding, Itchingfield floor screeding, Adversane floor screeding, Slinfold floor screeding, Coolham floor screeding, Five Oaks floor screeding, Barns Green floor screeding, Coneyhurst floor screeding, Parbrook floor screeding, Gay Street floor screeding and more.
Floor Screeding Services Billingshurst
- Billingshurst Fast-Dry Floor Screeding
- Billingshurst Cheap Floor Screeding
- Billingshurst Floor Screeding Advice
- Billingshurst Floor Levelling
- Billingshurst Floor Damp Proofing
- Billingshurst Screed Calculator Service
- Billingshurst Underfloor Heating Installations
- Billingshurst Residential Screeding
- Billingshurst Floor Insulation
- Billingshurst Screeding Services
- Billingshurst Fibre Reinforced Screeding
- Billingshurst Liquid Screeds
- Billingshurst Floor Screeding
- Billingshurst Commercial Screeding
Screeding Around Billingshurst: Floor screeders were recently completed for people living in New Road, Station Road, Gratwicke Close, Horsham Road, West Street, Newbridge Road East, St Mary's Close, Five Oaks Road, Pond Close, Myrtle Lane, Little East Street, Jengers Mead, Barrow Close, Bashurst Hill, Stane Street, Wicks Road, Valewood Close, Cedars Farm Close, Adversane Lane, Wooddale Lane, Silver Lane, Black Gate Lane, Cherry Tree Close, Norman Close, Broomfield Drive, Luggs Close, Dauxwood Close and these Billingshurst postcodes: RH14 9JU, RH14 9SB, RH14 9NU, RH14 9RZ, RH14 9NF, RH14 9EN, RH14 9HJ, RH14 9NG, RH14 9HP, RH14 9EE. Work was performed in these places by experts in screeding. Billingshurst business and home owners benefited from competent and professional screeding services in every case.



To find out local info regarding Billingshurst, West Sussex check here
More West Sussex Screeding Specialists: More West Sussex floor screeders: Henfield, Aldwick, Felpham, Lancing, Worthing, Pagham, East Grinstead, Selsey, Storrington, Lindfield, Southwater, Hassocks, Billingshurst, Southwick, Chichester, Shoreham-by-Sea, Hurstpierpoint, Crawley, Steyning, Burgess Hill, Horsham, Angmering, Littlehampton, Bognor Regis, Rustington, Middleton-on-Sea, Haywards Heath and Midhurst.
Floor screeding in RH14 area, telephone code 01403.