Floor Screeding Winterbourne Gloucestershire (BS36): If you are restoring a property or basement, are aiming to install under floor heating or have an uneven or damaged floor in your Winterbourne home, it is time to consider bringing in a professional floor screeder. Enabling you to lay your final layer of flooring material, (boards, tiles, carpets etc) over the top of it, floor screeding provides a smooth finish to a basic sub-base floor. The screeding is a vital procedure to guarantee a durable and quality finish to the whole floor structure.
FLOOR SCREEDING EXPERTS WINTERBOURNE
Supplying the experience and proper working methods to generate the perfect base for your floors, a screeding company in Winterbourne can assist you no matter what size or shape of room or area you are remodeling. Once your project has been thoroughly assessed, they'll be in a position to advise you on the correct kind of screed needed for your project, and how best to apply it.

They'll in addition assess if a structural engineer is needed to make certain that any flex strength, point loadings and load bearing are met as laid down in building and construction regulations.
Qualified and skilled tradesmen are necessary for a successful result and will extend the life of your floor through the use of the right sort of screed for the intended purpose of your room. The correct mix of screed and the way it is laid is also important to guarantee the final intergrity of your floor surface.
There are numerous screeding specialists in and around Winterbourne so make sure you get multiple price quotes for your floor screeding project before picking out a contractor and know to what standard of finish it's for. For residential properties a quote will normally be given for an SR (Surface Regularity) level of SR1 or SR2. SR2 and SR3 may be less costly options, but the finished floor surface could have errors and deviations, whilst SR1 guarantees a perfect quality of finish. An SR2 or SR3 level might mean there are flat spots or ridges that may cause problems when putting down your final floor surface.

All Winterbourne screeding installers must follow British Standards (BS8204) and ought to have accreditation from the manufacturers of screeding equipment and materials, e.g. Gypsol, Cemfloor, Flowcrete. This accreditation scheme illustrates a contractor's training and performance in the usage of a manufacturer's screeding merchandise.
For the screeding of floors in schools, factories, warehouses, salons, hospitals and shopping centres, specialist Winterbourne commercial screeders will be required.
TYPES OF SCREED
Standard Screeds - This is ideal for normal residential usage and comprises a blend of sand and cement. The standard screed is a mix of 5 parts sand to 1 of cement. Once it has been laid this 5:1 ratio will dry at a rate of 1mm each day.
Industrial and Heavy Duty Screed - Made for maximum strength and durability in places where traffic is expected to be high or specific loading of the floor is needed.
Fast Drying and Advanced Drying Screeds - As the name suggest, these screeds dry rapidly and allow you to use the floor area much faster. The majority of the fast drying screeds are of the fibre reinforced kind and are appropriate for a wide range of flooring projects where the quicker curing rate of 3-7mm is an advantage.
Liquid or Self-Levelling Screeds - When a high standard of finish is necessary this blend of cement and latex is used to create SR1 quality floor screeding. This is mostly needed to produce a smooth, clean floor over a damaged or poor quality substrate and results in a surface finish onto which all forms of flooring materials can be laid. Even with a thickness of 1mm, the latex polymers within the mixture provide a high strength surface for a wide range of uses.
Polymer Screeds - When a reduced thickness of floor is necessary because of building factors, a polymer screed offers a high strength resolution to the problem. Due to their different chemical compositions, these polymer screeds have varying setting times which you can verify by reading manufacturer's guidelines.
Fibre Reinforced Screed - Used with underfloor heating systems and is the favoured choice in such projects. The special fibres in this screed improve it's durability and strength while also protecting against thermal cracking and shrinkage. The screed will set hard at a rate of 1mm/day.
SCREEDING PREPARATION AND INSTALLATION
To ensure that the screeding is of a good quality finish that is durable and hard wearing, time must be spent on preparing the area prior to any screeding material being poured. Any paint, oil, debris and grease on the existing floor level can adversely affect the adhesion of the screed, and should be removed.

Any cleansing products which are used in this stage should leave no residues, and the floor surface must be allowed to dry out naturally. If screeding over a stone or cement floor all cracks should be repaired to stop them from "travelling" through your screed layer and causing deviations on the final floor surface. During a site survey the screeding installer will be able to see what preparation work is required before starting to work on the screeding.
To shield the flooring materials and screed layer from dampness rising up through the ground, a DPM (damp proof membrane) must be laid. The damp proof membrane is made of thick polythene and various layers could be used to act as a moisture barrier for the screeding.
If the area where you live is at risk from radon gas then another barrier is essential to stop the gas from entering from the ground. A simple air-tight membrane might be enough in locations with relatively low radon emissions, but in more extreme cases there may need to be a more sophisticated extraction system to remove any ground penetrating radon gases.
Once these stages have been completed the screeding company will apply a primer or sealant to the prepared floor base. A primer helps with the screed to successfully bond to the base and different varieties exist based on which type of screed is being used. These materials require experienced tradesmen to apply them in the correct ratios by using airless sprays and other bespoke equipment.
Before any screed is laid, any under floor heating will now be laid out. The under floor heating system is laid out in the correct pattern and mounted firmly on insulation panels to avoid any movement in the course of the screed pouring. Underfloor heating is one of the most efficient ways to heat a room and a skillfully installed system will deliver even warmth across the floor area.

The screed can now be mixed and prepared in situ and spread onto the floor surface. The requirements of the room will determine the sort of screeding used. Bear in mind that even quick drying screeds have a minimum of twenty four hours before you're able to walk on any screeded surfaces and at least 3 days before any flooring can be applied. If you're using standard or heavy duty screeds the drying time is increased and the manufacturer's guidelines must be adhered to in order to get the best possible finish to your floor.
The SR standard of your screeding can be confirmed once it's set sufficiently to be walked on. The test involves the use of a 2 metre straight edge laid on the floor surface and any deviations from true are measured.
- SR1 - SR1 is the highest quality and permits just 3 millimetres of deviation from the straight-edge.
- SR2 - If the screeded floor deviates from the straight edge by 5 millimetres or less it is SR2 quality and is the normal standard for industrial and commercial projects.
- SR3 - If the deviation is 10mm or less the quality of the screeding is categorised as SR3 and is highly suitable for utility and garage areas.
If you need to check the screeded floor for load bearing, a qualified structural engineer is needed to carry out the tests. Using specialist equipment the engineer will evaluate the screed surface strength and its suitability for use in a load bearing environment. A drop hammer test is conducted at several areas on the screed layer and the results noted. Any screed flooring that's got load bearing requirements must be approved by a competent structural engineer applying the British Standards BS8204 guidelines. (Tags: Floor Screeding Services Winterbourne, Floor Screeding Winterbourne, Screeding Winterbourne, Floor Screed Winterbourne).
What Does Screeding Do?
Within construction projects, screeding serves several critical purposes:
- Corrections to Subfloors.
- Support for Underfloor Heating Systems.
- Compatibility with Floor Finishes.
- Improving Thermal and Sound Insulation.
- Levelling and Smoothing.
- The Even Distribution of Loads.
- Surface Protection.
- Stability and Structural Integrity.
Overall, screeding is instrumental in achieving a durable, stable and level floor surface. By providing a solid foundation, it ensures that the floor finish maintains its quality and aesthetics, and withstands the demands of daily use over an extended period.
Multi-Coloured Floor Screeds
Coloured floor screeds are a flooring material that is frequently used in commercial or industrial settings. These screeds are made up of a combination of coloured aggregates, resins, and sealers that are blended together to create a unique and decorative finish. They are commonly used in areas where there is machinery or heavy footfall, as they provide a durable and slip-resistant surface that can withstand continuous wear and tear.
By customising multi-coloured screeds, a particular aesthetic can be achieved in a space or a business's branding can be matched. They are also easy to maintain and clean, making them a popular choice for facilities that require a high standard of hygiene. Multi-coloured floor screeds offer architects and designers the flexibility to create bespoke flooring designs tailored to their specific project parameters by allowing them to select aggregates based on size, shape, and colour. All in all, coloured floor screeds are a flooring solution that can add function and style to any commercial or industrial space, making them a practical and versatile choice.
Screeding Related Tasks

There is a variety of work that can be conducted by your local Winterbourne floor screeding company including flow screeding, structural screeds, subfloor repair, bathroom floors in Winterbourne, waterproof screeding, final floor finishes, concrete pumping, floor moisture testing Winterbourne, concrete screeding, floor levelling, damp proof membranes, floor insulation in Winterbourne, substrate floor preparation Winterbourne, shop screeding, screed flooring, lightweight floor screeding, sand and cement screeding, polished screed flooring in Winterbourne, granolithic floor screed, floor screed aftercare, hospital floor screeding Winterbourne, self-levelling floor screeding Winterbourne, underfloor heating installations, anhydrite screeds, sand floor screeding, floor resurfacing in Winterbourne, concrete floor toppings, pumped floor screeds, professional floor levelling services in Winterbourne, bonded concrete screeding Winterbourne, screeding estimates, domestic floor screeding, rapid curing screeds, coloured floor screeding Winterbourne, floor restoration, and more floor screeding tasks. These are just a selection of the activities that are performed by people specialising in screeding. Winterbourne providers will be delighted to keep you abreast of their entire range of floor screeding services.
Floor Screeding Near Winterbourne
Also find: Latteridge floor screeding, Coalpit Heath floor screeding, Stoke Lodge floor screeding, Hambrook floor screeding, Almondsbury floor screeding, Gaunt's Earthcott floor screeding, Winterbourne Down floor screeding, Frenchay floor screeding, Engine Common floor screeding, Emersons Green floor screeding and more.
TOP - Floor Screeding Winterbourne
Floor Screeding Companies Winterbourne - Fast-Dry Screeding Winterbourne - Commercial Screeding Winterbourne - Floor Screed Contractors Winterbourne - Floor Screeding Winterbourne - Self-Levelling Screed Specialists Winterbourne - Screeding Quotes Winterbourne - Floor Screeders Winterbourne - Screeder Winterbourne