Floor Screeding Yarm

Yarm Screeding & Floor Levelling Services

Floor Screeding Yarm North Yorkshire (TS15): When you're renovating your Yarm home that has damaged or uneven floors, or perhaps converting a basement or cellar into a useable living space, an experienced floor screeding specialist can provide you with a firm starting point. Before you are able to lay a final floor covering, whether it's wood, carpet or tile, the surface of the floor should be as flat as possible; which is why floor screeding is frequently needed. If you would like your floors to last then floor screeding is one of the most important factors in any building or renovation project.

Free Yarm Floor Screeding Quotes


Whatever size room or area you're renovating, a decent floor screeding company in Yarm can provide you with the experience and correct working methods to establish the perfect base for your floors. After assessing your project they will advise you on the optimal choice of screed and which technique for laying it is most appropriate for your circumstances.

Floor Screeding Yarm North Yorkshire (TS15)

It may be necessary, according to the intended use of the area, for a survey by a structural engineer to conform to building regulations on flex strength, load requirements and point loadings of the screed floor.

The skills and training that a screeding specialist brings to your project should guarantee a high quality result and help to prolong the life of your floor or floors. A correct mix of screed and the way it is laid is also crucial to ensure the ultimate quality of your floor.

There are a number of screeding specialists in the Yarm area so if possible get multiple estimates for your floor screeding project before choosing a contractor and know to what standard of finish is it for. For residential homes an estimate will usually be provided for an SR (Surface Regularity) standard of SR1 or SR2. SR2 and SR3 might be cheaper options, but the finished floor surface might have deviations and errors, whilst SR1 guarantees a pretty much perfect quality of finish. This could mean that you might have to rectify any patches that may cause issues when laying your final flooring material.

Floor Screeders Yarm (01642)

All Yarm screeding installers have to follow British Standards (BS8204) and should have some kind of accreditation from the manufacturers of screeding equipment and materials, e.g. Cemfloor, Gypsol, Flowcrete. This accreditation program demonstrates a contractor's training and high quality performance in the application of a manufacturer's merchandise.

Commercial screeders in Yarm will generally tackle screeding projects in restaurants, hospitals, shops, schools, factories and warehouses.


Standard Screeds - Used in domestic projects where the mix of cement and sand is good for everyday floor traffic usage. The ratios involved are 5 parts sand to 1 part cement. The standard flooring screed dries at a rate of one millimetre thickness each day.

Fibre Reinforced Screed - The professional's choice for residential use on top of underfloor heating. This is due to the improved strength and protection against thermal shrinkage and cracking offered by the special fibres within the screed mix. It dries at an identical rate to a standard screed of 1mm per day.

Advanced Drying and Fast Drying Screeds - If you need to move forward urgently with the flooring due to time restraints, this screed dries much quicker than standard flooring screeds. Drying out at a rate of three to seven millimetres, determined by the mix, they're normally a fibre reinforced screed and are suitable for flooring projects which have tight schedules.

Screeding Quotes Yarm North Yorkshire

Self-Levelling or Liquid Screeds - A cement and latex mixture which can achieve the highest standard of finish to SR1 levels. This self-levelling compound provides a smooth and clean surface over a damaged floor or rough substrate to enable all kinds of flooring materials to be laid. Even with a depth of one millimetre, the latex polymers within the mixture provide a high strength screed for a wide range of uses.

Industrial and Heavy Duty Screed - Where traffic levels are expected to be high or heavy loading on the floor is required, heavy duty screeds offer maximum strength and durability.

Polymer Screeds - An extremely high strength solution where a reduced thickness is required. Owing to their different chemical compositions, these polymer screeds have varying curing times which can be verified by studying manufacturer's product guidelines.


Screeding installers will need to carefully prepare all areas before any other work so as to ensure a hard wearing and quality screed flooring. The original floor surface should be cleaned to eradicate any oil, debris, grease and paint which might adversely affect the adhesion of the screeding.

Screeding Near Yarm (TS15)

If cleaning products have been used it's important to remove any traces of soap or detergent, and leave the surface to dry naturally. At this stage cracks need to be mended since these can travel up through the laid screed and be reflected in the finished surface. A decent Yarm screeding installer will address these issues during a on-site survey and make sure all preparations are complete before moving on to the next stages of the floor screeding process.

Before any screeding can be poured a DPM (damp proof membrane) will have to be installed to shield the final flooring and screed from moisture. There may be 2 or 3 layers of varying thicknesses of polythene to act as a barrier between the screed and the insulation layer.

If the area is susceptible to radon then another barrier is necessary to stop the gas from entering via the ground. If radon gas is present in large amounts then a full ventilation and extraction system might be needed under the layer of screed which will extract any gases that are seeping in from the ground.

Once these stages have been completed the screeding company will put on a primer or sealant to the prepared floor base. These primers and sealers will ensure that the screed bonds successfully to the base surface and help to accomplish a top quality finished floor. On account of their special nature, only trained screeding specialists in Yarm should be entrusted with using them safely and correctly and using equipment that is made for this task.

If required, this is the time that underfloor heating can be installed and laid out in the correct manner. The heating pipes and cabling are securely attached to insulation panels to prevent any movement and make sure that they are laid in the correct position. When professionally installed an underfloor heating system is an excellent way to warm a room and top quality screeding retains its heat, generating an even heat right across the floor surface.

Floor Screed Yarm (01642)

Naturally, if you're not fitting under floor heating, you simply bypass this stage and apply the screeding. Your screeding contractor will give you advice and guidance on which screed type is appropriate for your requirements, according to your proposed use of the room. Bear in mind that even quick drying screeds have a minimum of 24 hours before you are able to walk on any laid surfaces and at least 72 hours before any flooring can be fitted. This timescale is longer for heavy duty and standard screeds and the manufacture's guidelines must be followed to the letter to achieve the optimal finish and longevity of the floor.

The SR standard of your screeding can be checked once it's hardened enough to be walked on. The standard SR test uses a two metre long straight-edge to check for any fluctuations in the floor surface.

  • SR1 - SR1 is the best quality and permits only three millimetres of disparity from the straight-edge.
  • SR2 - If the floor surface has a deviation from the straight-edge of 5mm or less it is SR2 quality and is the normal standard for industrial and commercial floors.
  • SR3 - SR3 is utility standard where a perfect quality finish isn't necessary. This specification can have a maximum permissible deviation depth of 10mm.

If you need to check the screeded floor for load bearing, a structural engineer is needed to conduct the tests. The assessment will ensure your new screed surface is suitable for the load point requirements set down in the original site survey. The screeding will be given a drop hammer test to determine strength and flexibility in different areas. The specialist measurement and testing tools mean this can only be performed by a qualified structural engineer heeding the guidelines of BS8204. (Tags: Floor Screeding Yarm, Screeding Yarm, Floor Screed Yarm, Floor Screeding Services Yarm).

Floor screeding services are available in Yarm and also in nearby places like: Thornaby-on-Tees, Neasham, Kirklevington, Crathorne, Egglescliffe, Newby, Hutton Rudby, Maltby, Long Newton, Ingleby Barwick, Seamer, Middleton St George, Appleton Wiske, Eaglescliffe, and in these postcodes TS15 9ED, TS15 9ET, TS15 9LL, TS15 9EG, TS15 9DQ, TS15 9BH, TS15 9RW, TS15 9RS, TS15 9QJ, TS15 9QS. Local Yarm floor screeders will most likely have the telephone code 01642 and the postcode TS15.

Book a Screeder in Yarm UK

The Tools That Are Required for Screeding Floors

  • Gloves
  • Knee Protection
  • Humidity Tester
  • Tape Measure
  • Wheelbarrow
  • Trowel
  • A Long Spirit Level
  • Float
  • Straight Edge
  • Shovel
  • Floor Profile

Screeding Enquiries North Yorkshire

North Yorkshire Screeding Enquiries

The latest North Yorkshire floor screeding requirements: Patryk Morley recently enquired about screeding the floor of a kitchen and lounge in Glaisdale. Rufus and Nusaybah Rigby recently requested an estimate for screeding a garage floor in a bungalow in Killinghall, North Yorkshire. Olivia-Grace and Alexandru Morrison recently requested a price quote for screeding a utility room floor in a terraced house in Ormesby, North Yorkshire. Leona Burton and Seamus Burton recently enquired about the possibility of screeding an extension floor in Ormesby. Emelia Keeling recently asked for a price quote for screeding a cellar floor in Malton, North Yorkshire. Omar Marlow and Amna Marlow recently asked for a quotation for screeding the floor of a basement in Norton, North Yorkshire. Freya Stainton recently enquired about the possibility of screeding a floor and installing underfloor heating in Monk Fryston. Violet Noble recently requested a price quote for screeding a living room floor in a terraced house in Hampsthwaite, North Yorkshire.

Related Tasks

Screeding Related Tasks Yarm

There are a wide array of tasks that can be conducted by your local Yarm floor screeder including floor preparation services, fibre reinforced floor screeding Yarm, concrete pumping, basement screeding, floor levelling in Yarm, conservatory floor screeding, hospital floor screeding in Yarm, floor screeding Yarm, commercial screeding, damp proof membranes, floor screeding tools, liquid screeds, residential floor screeding, acoustic flooring, self-levelling screeding, bonded concrete screeding in Yarm, cheap screeding, polished floor screeding in Yarm, and lots more floor screeding tasks.


Floor Screeding Near Yarm

Also find: Kirklevington screeding, Neasham screeding, Eaglescliffe screeding, Long Newton screeding, Maltby screeding, Thornaby-on-Tees screeding, Crathorne screeding, Ingleby Barwick screeding, Hutton Rudby screeding, Middleton St George screeding, Seamer screeding, Appleton Wiske screeding, Egglescliffe screeding, Newby screeding services and more.

Floor Screeding Services Yarm

Find Floor Screeding in Yarm Here
Screeding Services in Yarm North Yorkshire (01642)
  • Yarm Fast-Dry Screeding
  • Yarm Screeding Services
  • Yarm Domestic Floor Screeding
  • Yarm Polished Screed Floors
  • Yarm Floor Insulation
  • Yarm Cheap Floor Screeding
  • Yarm Floor Damp Proofing
  • Yarm Liquid Screeds
  • Yarm Floor Screeding
  • Yarm Fibre Reinforced Floor Screeding
  • Yarm Underfloor Heating Installations
  • Yarm Screed Calculator Service
  • Yarm Floor Levelling
  • Yarm Screeding Advice

Around Yarm

In the previous 12 months screeded floors had been laid in these Yarm streets: Playlin Close, Bulmer Close, Worsall Close, The Slayde, Westworth Close, Mortain Close, Earle Close, Bentley Wynd, Winter Close, Meynell's Walk, Clockwood Gardens, Denevale, Debruse Avenue, Leven Road, Winpenny Close, Spitalfields, Hoope Close, Thornton Garth, Bankside, Spital Gate, Levendale Close, Carew Close, Castle Dyke Wynd, Hedley Close, Wharton Close, Stonehouse Close, and in these North Yorkshire postcodes: TS15 9ED, TS15 9ET, TS15 9LL, TS15 9EG, TS15 9DQ, TS15 9BH, TS15 9RW, TS15 9RS, TS15 9QJ, TS15 9QS.

Other Useful Trades in Yarm North Yorkshire

North Yorkshire Screeders Near Me Yarm

Undoubtedly, whenever you happen to be doing home improvements in Yarm, North Yorkshire, you are likely to be in need of all types of different tradespeople and apart from a floor screeder in Yarm, North Yorkshire, you may also need an underfloor heating specialist in Yarm, plastic flooring in Yarm, a heating engineer in Yarm, an electrician in Yarm, a plasterer in Yarm, a carpenter in Yarm, a carpet fitter in Yarm, a bricklayer in Yarm, a floor tiler in Yarm, a plumber in Yarm, waste removal in Yarm, a handyman in Yarm, solid wood flooring in Yarm, a building contractor in Yarm, and other different Yarm tradesmen.

To get local info on Yarm, North Yorkshire look here

Floor screeding in TS15 area, telephone code 01642.

TOP - Floor Screeding Yarm