Floor Screeding Litherland Merseyside (L21): A professional floor screeding company can assist with renovations, help to install under floor heating or level an uneven or damaged floor on your Litherland property, when needed. Before it is possible to lay a final floor covering, whether it's tile, carpet or wood, the surface of the floor should be as flat as is possible; which is why screeding a floor is sometimes needed. Floor screeding can provide a high quality and durable floor surface for almost any room.
FLOOR SCREEDING CONTRACTORS LITHERLAND
It matters not how large or small the area is that you need to be levelled, a certified screeding company in Litherland will have the essential know-how, equipment and skills to provide you with an excellent level of service. They will be able to assess your project and determine the appropriate sort of screed you need and the best strategy for applying it.
They will likewise assess if a structural engineer is needed to ensure any flex strength, point loadings and load bearing are met as set out in construction and building regulations.
Working with a qualified and skilled flooring specialist will ensure that you get the right kind of screed for the room's allocated usage to extend the lifetime of your flooring. A correct mix of screed and the way it is laid is also crucial to ensure the final quality of your floor surface.
Before deciding upon a floor screeding contractor from any operating in the Litherland area, ask to what standard of finish they are basing their price quote, and also ensure that you get two or three estimates. The quote could be based on what's known as the Surface Regularity, or SR number. SR1 is the best standard, and while SR2 and SR3 might seem less costly initially, they don't guarantee a totally flat or even floor surface. An SR2 or SR3 level might mean there are flat spots or ridges that may cause problems when laying your final flooring materials.
All Litherland screeding companies have to comply with British Standards (BS8204) and ought to have some kind of accreditation from screeding material and equipment manufacturers, e.g. Gypsol, Cemfloor, Flowcrete. This accreditation scheme illustrates a firm's ability and training in the use of a manufacturer's screeding merchandise.
Litherland commercial screeders might be involved in the screeding of floors in factories, shopping centres, schools, pubs, warehouses and hospitals.
TYPES OF SCREED
Standard Screeds - Frequently used in domestic flooring projects where the combination of sand and cement is perfect for standard floor traffic usage. The standard screed is a mix of five parts sand to one of cement. This 5:1 ratio standard flooring screed will dry out at a rate of one millimetre per day after applying.
Liquid or Self-Levelling Screeds - A latex and cement formula which can achieve the highest standard of finish to SR1 levels. Mostly used to improve a poor substrate level or damaged floor to enable the laying of a brand new flooring surface, like tiling over the top of it. The liquid screed can be laid to a depth of just one millimetre, but still provides a high strength base for a varied selection of flooring finishes.
Industrial and Heavy Duty Screed - Developed for maximum strength and durability on floors where traffic is expected to be high or heavy loading on the floor is required.
Fibre Reinforced Screed - The first choice where underfloor heating is being installed in residential homes in Litherland. The greater strength and flexibility provided by the special fibres in this screed help protect the resulting floor from thermal cracking and shrinkage. It dries out at the same rate as a standard screed of one millimetre per day.
Fast Drying and Advanced Drying Screeds - If you need to progress urgently with the flooring on account of time limitations, these screeds dry more speedily than standard screeds. They are generally a fibre reinforced type of screed which can dry out at a rate of between 3-7mm per day and are employed in time-sensitive projects.
Polymer Screeds - These provide an extremely high level of strength with a lower thickness. Polymer screeds are available from many manufacturers and owing to their varying chemical compositions have distinct setting times for each product.
SCREEDING PREPARATION AND INSTALLATION
To enable the screeding to be of a high quality finish which is hard wearing and durable, time must be devoted to fully preparing the area before any screed is poured. Any oil, grease, debris and paint on the original floor surface can adversely affect the bonding of the screed, and must be eradicated.
If cleansing products were used it's important to remove any traces of soap or detergent, and allow the floor surface to dry naturally. If screeding over a cement or stone floor all cracks should be mended to prevent them from "travelling" through your screed layer and causing deviations on the finished surface. A site survey will enable your Litherland screeding company to pinpoint these preparation areas and complete them before commencing to lay the screeding.
To shield the flooring materials and screed layer from moisture rising up from the ground, a DPM (damp proof membrane) will have to be laid. There may be 2 or 3 layers of varying thickness polythene to act as a barrier between the screed and the insulation layer.
If the area where you live is susceptible to radon gas then one additional barrier is necessary to prevent the gas from entering from the ground. If radon gas is present in large amounts then a full ventilation system may be installed beneath the layer of screed which will extract any gases that might seep in from ground level.
Once the floor base has been properly prepared and any membranes installed, a sealant or primer is then put on. A primer assists in the screed to bond to the base surface and different types exist based on which type of screed is being used. These materials require experienced technicians to apply them in the appropriate proportions by using airless sprays and other custom-built equipment.
If you are installing under floor heating, this is the time that it will need to be correctly set out and installed. The underfloor heating system is laid out in the correct pattern and firmly secured to insulation panels to avoid potential movement during screed installation process. When professionally installed an under floor heating system is an excellent way to warm up a room and top quality screeding retains its heat, producing an even heat across the floor surface.
If you aren't putting in underfloor heating the screed will now be prepared in situ and poured. Your screeding company will give you guidance and advice on which screed type is appropriate for your needs, in line with your intended use of the room area. After the pouring of the screed there's a minimum 24 hours (for quick drying and advanced screeds) before you are able to walk upon the surface, and a 72 hours minimum drying period for any floor material installations. If you are aiming to wind up with a nicely finished and long-lasting floor surface you should stick to the manufacturer's guidelines with regards to standard and heavy duty screeds where the timescale will be longer.
You can test the SR level of the completed screed once it's set enough for walking on. Using a 2m straight-edge the surface is checked for any ridges, dips and deviations in the screed surface.
- SR1 - SR1 is the highest specification and allows just 3 millimetres of disparity from the straight-edge.
- SR2 - The normal standard flooring in commercial and industrial builds is normally SR2 and has a maximum possible deviation of 5mm across the whole screeded surface.
- SR3 - For other floors where the quality of finish is fairly inconsequential the SR3 is the classification and has a deviation measurement of 10 millimetres or less.
If your screeding has been laid with particular loading in mind then a structural engineer is going to be required to carry out the assessment. This assessment will determine the strength of the screeding and its viability for the intended use. An assessment called the "drop hammer test" is carried out on various areas of the screed and the outcomes noted. Only fully qualified structural engineers obeying the British Standards BS8204 regulations are allowed to perform such testing and sign off on the structural integrity of screed flooring. (Tags: Floor Screeding Services Litherland, Screeding Litherland, Floor Screeding Litherland, Floor Screed Litherland).
Floor screeding services are available in Litherland and also in: Walton, Great Crosby, Crosby, Bootle, New Hall, Waterloo, Brighton le Sands, Ford, Norris Green, Blundellsands, Seaforth, Netherton, Croxteth, Old Roan, Gillmoss, Aintree, Orrell, and in these postcodes L21 7PP, L21 9LS, L21 9NW, L21 7LU, L21 7NS, L21 9NF, L21, L21 7RB, L30 2NR, L21 7QL. Local Litherland floor screeders will probably have the postcode L21 and the dialling code 0151. Click the "quote" banner to get specifics of screeding services in your location.
There are a wide range of tasks that can be completed by your local Litherland floor screeding company including self-levelling screeding, cheap screeding, floor preparation services in Litherland, waterproof floor screeding, screed repairs, concrete pumping Litherland, bonded concrete screeding, basement screeding, damp proof membranes in Litherland, floor screed testing, floor screeding, fibre reinforced floor screeding, underfloor heating installations, commercial floor screeding in Litherland, floor screeding quotes, conservatory screeding in Litherland, floor levelling, polished screeding, and more floor screeding tasks.
Tools Required by a Floor Screeding Specialist
- Knee Protectors
- Spiked Roller
- A Long Spirit Level
- Floor Profiler
- Straight Edge
Floor Screeding Near Litherland
Also: Crosby screeding, Bootle screeding, Seaforth screeding, Great Crosby screeding, Old Roan screeding, Aintree screeding, Croxteth screeding, Gillmoss screeding, Netherton screeding, Waterloo screeding, Ford screeding, Blundellsands screeding, New Hall screeding, Walton screeding, Orrell screeding, Brighton le Sands screeding, Norris Green and more.
- Litherland Liquid Screeds
- Litherland Screeding Services
- Litherland Fibre Reinforced Screeding
- Litherland Commercial Floor Screeding
- Litherland Screeding Advice
- Litherland Underfloor Heating Installation
- Litherland Cheap Screeding
- Litherland Floor Levelling
- Litherland Screed Calculator Service
- Litherland Floor Screeding
- Litherland Residential Floor Screeding
- Litherland Floor Damp Proofing
- Litherland Floor Insulation
- Litherland Fast-Dry Screeding
Some Litherland areas where screeding work has recently been done - Bridge Road, Markfield Road, Seaforth Road, Orrell Mount, Hawthorne Road, Elizabeth Road, Grogan Square, Sefton Road, Bryant Road, Rose Avenue, Willard Street, St Andrews Road, Lathom Road, Thornton Road, Netherton Road, Lunt Road, Silverdale Drive, Thornton Street, Orrell Road, Inman Road, Halsall Road, Melville Road, Grasmere Drive, Wood Street, St Philip's Avenue, Lawler Street, Malvern Road, as well as these local Litherland postcodes: L21 7PP, L21 9LS, L21 9NW, L21 7LU, L21 7NS, L21 9NF, L21, L21 7RB, L30 2NR, L21 7QL.
If you're interested in local Litherland information click here
Litherland Screeding Jobs: See floor screeding jobs near Litherland here: Litherland Screeding Jobs
Floor screeding in L21 area, phone code 0151.