Floor Screeding Morecambe Lancashire (LA4): If you have an uneven or damaged floor, are renovating a property or basement or are planning to install under floor heating in your Morecambe home, it is time to think about hiring a floor screeding professional. A screed is used to generate a smooth floor surface over a rough concrete sub-base and give a solid foundation for you final flooring material. If you would like your floors to last a long time then floor screeding is one of the most important factors in any building or renovation task.
FLOOR SCREEDING EXPERTS MORECAMBE
It doesn't matter how big or small the area you need to be levelled, a certified screeding company in Morecambe will have the essential know-how, skills and equipment to give you an excellent level of service. After assessing your project they'll advise you on the perfect choice of screeding and which technique for laying it is most suited to your circumstances.
They will also assess if a structural engineer is necessary to make certain that any point loadings, load requirements and flex strength are met in accordance with the building regulations.
The training and skills that a certified screeding specialist brings to your project should guarantee a successful end result and help to lengthen the lifetime of your flooring. A correct mixture of screed and the techniques used in laying it are also vital to ensure the final intergrity of your floor.
Before selecting a floor screeding company from any operating in the Morecambe area, ask to what standard of finish they are basing their quote, and also make certain you get two or three price quotes. The estimate might be based on what is called the Surface Regularity, or SR number. SR2 and SR3 might be cheaper options, however the floor screeding finish could have deviations and errors, whilst SR1 guarantees a perfect quality of finish. This means that you may have to rectify any areas that could cause problems when putting down your final flooring solution.
Every Morecambe screeding company has to follow British Standards (BS8204) and ought to have some kind of accreditation from the manufacturers of specialised screeding equipment and materials, for instance Cemfloor, Gypsol, Flowcrete. A contractor holding such accreditation demonstrates they have been trained and assessed in the use of these products and can provide a high quality standard in all areas of their installation.
Commercial screeders in Morecambe will generally undertake screeding projects in shops, factories, schools, hospitals, warehouses and restaurants.
TYPES OF SCREED
Standard Screeds - This is ideal for regular residential use and is a combination of sand and cement. 5 parts sand to 1 part cement is the normal mixture for standard flooring screeds. After laying a standard screed mix dries out at a rate of 1mm/day.
Industrial and Heavy Duty Screed - Where levels of traffic are expected to be high or heavy loading on the floor is necessary, heavy duty screeds offer maximum strength and durability.
Fast Drying and Advanced Drying Screeds - As the name suggest, this screed dries quickly and allows you to use the screeded area much sooner. Drying at a rate of three to seven millimetres, determined by the specialised mix, they are usually a fibre reinforced kind of screed and are suitable for projects that have tight schedules.
Polymer Screeds - When a reduced thickness of floor is needed because of building requirements, a polymer screed provides an extremely high strength solution to this situation. The drying times vary according to proprietary product guidelines.
Liquid or Self-Levelling Screeds - A cement and latex solution which can produce the highest standard SR1 finish. Mainly used to improve a damaged floor or poor substrate level to enable the laying of a new flooring surface, such as tiling on top of it. Even with a depth of only 1mm, the latex polymers within the mixture provide a high strength screed for a wide variety of uses.
Fibre Reinforced Screed - The preferred option where underfloor heating is being installed in residential homes in Morecambe. The increased strength and flexibility provided by the special fibres within this screed help protect the floor from cracking and shrinkage due to heat. The screed will set hard at a rate of roughly 1mm/day.
SCREEDING PREPARATION AND INSTALLATION
To enable the screeding to be of a high quality finish which is durable and hard wearing, time should be devoted to fully preparing the area prior to any screed being laid. Any grease, debris, oil and paint on the original floor level can adversely affect the bonding of the screed, and must be eradicated.
If cleansing products have been used it's crucial to remove any residues of detergent, soap etc, and allow the surface to dry naturally. At this point any cracks should be mended since these can easily travel up through your laid screed and be visible in the finished floor surface. An on-site survey will allow your Morecambe screeding specialist to pinpoint these preparation areas and complete them before commencing to apply the screed layer.
Before any screeding can be laid a damp proof membrane (DPM) must be installed to shield the screed and final flooring from moisture. There might be two or three layers of different thicknesses of polythene to act as a barrier between the screed and the insulation layer.
If the area where you live is susceptible to radon gas then one additional barrier is needed to prevent this harmful gas from entering via the ground. This could be as simple as an air-tight membrane, or in more serious cases an extraction and ventilation system will need to be installed underneath the floor screed to take away any influx of radon gas from the ground.
As soon as the floor base has been prepared and any membranes installed, a sealant or primer is then applied. A primer helps with the screed to successfully bond to the base and membranes and different varieties exist based on which kind of screed is being used. Owing to their special nature, only experienced screeders in Morecambe should be entrusted with using them correctly, safely and using bespoke equipment for the task.
If required, this is the time that underfloor heating can be laid out in the correct manner and installed. Insulation panels can be laid out and the cabling and heating pipes will be firmly fastened so there's no movement while the screed is poured. Underfloor heating is one of the most efficient ways to heat a room and a properly installed system should provide even level of warmth in all areas of the floor.
The screed can now be prepared in situ and poured onto the floor base. Your use of the room will help your screeding company on which sort of screed is right for your needs. For advanced and quick drying screeds there'll be at least 24 hours delay before it can be walked on, and a further 72 hours minimum before any flooring material can be applied. Manufacturer's drying instructions for heavy duty and standard screeds should be observed so as to achieve a quality finish and end up with a stable and long lasting surface.
The SR level of your screed can be verified once it's hardened sufficiently to be walked on. Through the use of a 2 metre straight-edge the surface is checked for any deviations, ridges and dips in the surface of the screed.
- SR1 - Over the whole area, if there aren't any deviations of more than three millimetres from the straight-edge, then you have a top specification SR1 standard surface.
- SR2 - SR2 is the classification for standard industrial and commercial floors and can deviate from the straight-edge by as much as five millimetres.
- SR3 - For a utility area or room where the quality of finish is relatively immaterial SR3 is the standard and should have a maximum deviation measurement of ten millimetres or less.
It might also be necessary for a qualified structural engineer to carry out a soundness test. Using specialised equipment the structural engineer will establish the screed strength and its suitability for use in a load bearing environment. An assessment called the drop hammer test will be performed on various areas of the screed and the results noted. Any screed flooring that's got point load requirements must be sanctioned by a competent structural engineer applying the British Standards BS8204 guidelines. (Tags: Floor Screeding Morecambe, Floor Screed Morecambe, Floor Screeding Services Morecambe, Screeding Morecambe).
Floor screeding services are available in Morecambe and also nearby in: Overton, Heysham, West End, Great Wood, Halton, Scale Hall, White Lund, Torrisholme, Bare, Lancaster, Heaton-With-Oxcliffe, Sandylands, Bolton-le-Sands, and in these postcodes LA3 1BL, LA3 3DG, LA3 1QG, LA3 1TF, LA3 3LT, LA3 2XQ, LA3 2YY, LA3 1AD, LA3 1RG, LA3 1AA. Locally based Morecambe floor screeders will likely have the telephone code 01524 and the postcode LA4. Simply click on the "quote" banner to get info on screeding services in your area.
Lancashire Screeding Enquiries
Recently posted Lancashire floor screeding job postings: Dougie Strange recently enquired about getting a price for screeding a utility room floor in Mellor Brook, Lancashire. Mr and Mrs Macmillan recently enquired about getting a price for screeding the floor of a workshop in Heskin, Lancashire. Romilly and Viktor Ansell recently requested a price quote for screeding a cellar floor in Preesall. Mr and Mrs Nicholas recently requested a price quote for screeding a kitchen and lounge floor in Hoddlesden. Bodhi Lunn and Julia Lunn recently requested a price quote for screeding the floor of a living room in a cottage in Sollom. Ronan and Brooklyn Tovey recently enquired about screeding over an old concrete floor in Mawdesley. Mr and Mrs Rhodes recently requested a quote for screeding the floor of a garage in a bungalow in Scarisbrick, Lancashire. Steven and Ema Reynolds recently requested a quote for screeding the floor of a basement in Walton le Dale.
The Tools That Are Needed for Screeding Floors
- Spirit Level
- Dappling Bar
- Floor Profiler
- Knee Protectors
- Straight Edge
There is a wide range of work that can be carried out by your local Morecambe floor screeder including industrial floor screeding, underfloor heating installation, floor screeding in Morecambe, floor restoration, liquid screeds Morecambe, quick-dry screeds Morecambe, floor screed repairs, floor screeding tools Morecambe, garage floor screeding, residential floor screeding, damp proof membranes, bonded concrete floor screeding, polished floor screeding Morecambe, factory floor screeding, floor screeding price quotes in Morecambe, floor levelling in Morecambe, cellar floor screeding in Morecambe, cheap screeding Morecambe, and lots more floor screeding tasks.
Floor Screeding Near Morecambe
Also: Torrisholme screeding, Heaton-With-Oxcliffe screeding, Heysham screeding, White Lund screeding, Bare screeding, Great Wood screeding, Overton screeding, West End screeding, Scale Hall screeding, Bolton-le-Sands screeding, Sandylands screeding, Halton screeding, Lancaster and more.
- Morecambe Fibre Reinforced Floor Screeding
- Morecambe Liquid Screeds
- Morecambe Floor Damp Proofing
- Morecambe Underfloor Heating Installation
- Morecambe Screeding Services
- Morecambe Fast-Dry Floor Screeding
- Morecambe Floor Levelling
- Morecambe Floor Screeding
- Morecambe Floor Screeding Advice
- Morecambe Screed Calculator Service
- Morecambe Polished Screed Floors
- Morecambe Commercial Floor Screeding
- Morecambe Floor Insulation
- Morecambe Domestic Floor Screeding
Some Morecambe areas where screeding work has recently been done - Bare Avenue, Bristol Street, Seathwaite Avenue, Church Grove, Tarnbrook Road, Shortlands Drive, Baycliffe Crescent, Betony, Albany Road, South Road, Duke Street, Tomlinson Road, Thorpe Avenue, St Helens Road, Carr Lane, Beverley Court, Charles Street, Aldcliffe Court, Sandylands Promenade, Seaborn Drive, Somerby Road, Bryony Court, Thistle Break, Arncliffe Road, Tarnbrook Court, Tibicar Drive West, Byron Road, as well as these local Morecambe postcodes: LA3 1BL, LA3 3DG, LA3 1QG, LA3 1TF, LA3 3LT, LA3 2XQ, LA3 2YY, LA3 1AD, LA3 1RG, LA3 1AA.
If you're interested in local Morecambe information check here
More Darwen, Skelmersdale, Colne, Bacup, Fulwood, Blackburn, Lytham St Annes, Accrington, Ormskirk, Heysham, Preston, Poulton, Leyland, Nelson, Lancaster, Blackpool, Fleetwood, Burnley, Chorley, Clitheroe, Morecambe, Haslingden, Rawtenstall and Penwortham.:
Floor screeding in LA4 area, 01524.
Floor Screeding Morecambe - Self-Levelling Screed Specialists Morecambe - Industrial Screeding Morecambe - Floor Screeders Morecambe - Screeding Morecambe - Floor Screeding Services Morecambe - Floor Screeder Morecambe - 01524 - Floor Levelling Morecambe