Floor Screeding Jarrow

Jarrow Screeding & Floor Levelling Services

Floor Screeding Jarrow Tyne and Wear (NE32): When you are renovating your Jarrow home that has damaged or uneven floors, or perhaps converting a cellar or basement to useful living space, an established floor screeding specialist should be your first port of call. A screed is used to generate a smooth floor surface over a concrete sub-base and give a level foundation for your choice of top flooring material. If you want your floors to last a long time then floor screeding is one of the most important factors in any building or renovation project.

Free Jarrow Floor Screeding Quotes


It does not matter how small or large the area you require to be levelled, a certified screeding contractor in Jarrow will have the necessary equipment, expertise and knowledge to offer you a superb standard of service. After evaluating your project they'll give you advice about the perfect choice of screeding and which technique for laying it is most suited to your circumstances.

Floor Screeding Jarrow Tyne and Wear (NE32)

It might be a requirement, contingent on the proposed use of the area, for a survey by a structural engineer to conform to building regulations on flex strength, point loadings and load bearing of the screed floor.

Working with a qualified and highly trained flooring specialist will guarantee you use the proper sort of screed for the room's anticipated purpose and get the maximum lifespan out of the resulting flooring. There are many different types of screed and selecting the appropriate mix and laying approach is vital if you are to achieve a quality floor which is fit for purpose and long-lasting.

There are many screeding specialists in and around Jarrow so make sure you get multiple estimates for your project before choosing a company and know to what standard of finish it's for. The SR (Surface Regularity) finish is the figure to look for when getting an estimate from your Jarrow screeding contractor. Each of the three SR levels deliver different levels of finish, with SR1 being the highest, with the least amount of deviation over the surface area. Any error in the screeding can cause issues with laying flooring owing to indentations, flat spots, ridges in the floor surface.

Floor Screeders Jarrow (0191)

Every Jarrow screeding company must observe British Standards (BS8204) and ought to have accreditation from screeding material and equipment manufacturers, for instance Cemfloor, Flowcrete, Gypsol. This accreditation program showcases a firm's high quality performance and training in the use of a manufacturer's merchandise.

Commercial screeders in Jarrow will generally tackle screeding projects in schools, shopping centres, hospitals, warehouses, pubs and factories.


Standard Screeds - This is good for normal domestic usage and comprises a mixture of cement and sand. The standard screed is a mix of five parts sand to one of cement. After laying a standard flooring screed sets at a rate of 1mm/day.

Screeding Quotes Jarrow Tyne and Wear

Liquid or Self-Levelling Screeds - When the highest possible standard of finish is required this compound of cement and latex is used to achieve SR1 level screed flooring. Primarily used to improve a poor substrate level or damaged floor in order to lay a new flooring surface, such as vinyl planks over the top of it. The liquid screed can be laid to a depth of only 1mm, but will still provide a strong surface to take a varied selection of flooring materials.

Polymer Screeds - When a decreased thickness of floor is required because of construction factors, a polymer screed offers an extremely high strength resolution to this situation. On account of their different chemical compositions, these polymer screeds have varying curing times which you can verify by viewing manufacturer's guidelines.

Fast Drying and Advanced Drying Screeds - If you need to move forward urgently with the flooring owing to time constraints, this screed dries much quicker than standard screeds. The majority of the fast drying screeds are of the fibre reinforced kind and are perfect for a wide range of flooring projects where the speedier drying rate of 3-7mm/day is an advantage.

Industrial and Heavy Duty Screed - A screed that's designed for heavy traffic and high load areas where the maximum possible strength and durability is essential.

Fibre Reinforced Screed - The professional's choice for domestic use on top of under floor heating. The increased flex and strength offered by the fibres in this screed help protect the flooring from thermal shrinkage and cracking. At around one millimetre per day, it has an identical setting rate to standard screed.


Good preparation is essential for a quality finished screed surface that will be hard wearing and durable. It's crucial that any contaminants such as oil, paint, grease or debris is eliminated from the floor before laying any screed, as these can affect the adhesion process that a good quality screed requires.

Screeding Near Jarrow (NE32)

If any cleaning products were used during this stage it's important to make sure that no residues of soaps or detergents are left on the surface and it is allowed to dry out naturally. It's essential to mend any cracks or crevices in the base to prevent them being visible and "travelling" up into your freshly screeded floor. During a site survey the screeding contractor will establish what preparation work is necessary before starting to work on the actual screeding.

To protect the flooring materials and screeding layer from dampness rising up from the ground, a damp proof membrane (DPM) will have to be installed. The DPM is made from thick polythene sheeting and various layers may be used to act as a moisture barrier and air insulating layer for the screeding.

If your property is situated in an area where radon is found an additional barrier layer is necessary to prevent radon gas from getting through. This could be just a simple airtight membrane, or in more serious cases a ventilation and extraction system will need to be installed under the floor screed to take away any influx of air and gas from ground level.

Once the floor base has been prepared and any DPMs installed, a sealer or primer is then put on. Primers assist with the bonding process and are specialist applications according to the kind of screed that is being applied. These substances require certified technicians to apply them in the appropriate proportions by using custom-made equipment, such as airless sprays.

If you are installing underfloor heating, now is the time that it will need to be properly set out and installed. Insulation panels can be arranged and the heating pipes and cables will be firmly fastened so that there is no movement whilst the screed is being applied. Underfloor heating is one of the most effective ways to heat a room and a skillfully installed system will deliver even warmth all over the floor.

Floor Screed Jarrow (0191)

The screeding can now be prepared on site and applied to the floor base. The particular requirements of the room will dictate the sort of screeding used. For advanced and quick drying screeds there'll be at least twenty four hours delay before it is able to be walked over, and a further 72 hours minimum before you are able to lay any flooring materials. If you're laying standard or heavy duty screeds the drying time is increased and you should follow the manufacturer's guidelines so as to get the best possible finish to your floor.

As soon as the screed has set it can be quality checked to verify the SR level. Using a two metre straight-edge the surface is examined for any ridges, dips and deviations in the surface of the screed.

  • SR1 - Disparities of 3mm or less as measured over the whole area shows your screed floor to be of the highest quality and is classified as SR1.
  • SR2 - If the screeded floor deviates from the straight edge by five millimetres or less it is classified as SR2 level and is the normal standard for commercial and industrial projects.
  • SR3 - For other floors where the quality of finish is relatively immaterial the SR3 is the standard and should have a maximum deviation measurement of 10mm or less.

If your screed has been installed with specific loading in mind then a structural engineer is going to be needed to perform these soundness tests. Using specialised equipment the structural engineer will establish the screed surface strength and suitability of use in a load bearing environment. An assessment called the drop hammer test is carried out on different areas of the screed and the results recorded. The specialist measurement and testing tools involved mean that this can only be performed by a certified structural engineer following the BS8204 guidelines. (Tags: Floor Screeding Services Jarrow, Screeding Jarrow, Floor Screed Jarrow, Floor Screeding Jarrow).

Floor screeding services are available in Jarrow and also in nearby places like: Pelaw, Harton, East Boldon, South Shields, Wallsend, West Harton, Newcastle, West Park, Fulwell, Cleadon, Whitburn, Heworth, Boldon, Hebburn, Wardley, Westoe, Simonside, and in these postcodes NE32 3DE, NE32 3PW, NE32 3DS, NE32 3SN, NE32 3HA, NE31 1EJ, NE32 3HF, NE32 3QR, NE32 3JH, NE32 3PN. Local Jarrow floor screeders will likely have the postcode NE32 and the dialling code 0191.

Book a Screeder in Jarrow UK

Related Tasks

Screeding Related Tasks Jarrow

There are a whole host of tasks that can be completed by your local Jarrow floor screeding specialist including conservatory floor screeding, acoustic flooring, underfloor heating installation, bonded concrete screeding, polished screeding in Jarrow, fast-dry screeds, concrete pumping in Jarrow, garage screeding, fibre reinforced floor screeding, floor screeding, floor repairs, screeding advice, industrial floor screeding, rapid strength floor screeds, floor screed testing Jarrow, liquid screeds, damp proof membranes, screeding repairs in Jarrow, and more floor screeding tasks.


Floor Screeding Near Jarrow

Also find: Cleadon screeding, South Shields screeding, Heworth screeding, West Harton screeding, Harton screeding, Hebburn screeding, Pelaw screeding, East Boldon screeding, Wallsend screeding, Whitburn screeding, Newcastle screeding, Simonside screeding, West Park screeding, Fulwell screeding, Boldon screeding, Westoe screeding, Wardley screeding services and more.

Floor Screeding Services Jarrow

Find Floor Screeding in Jarrow Here
Screeding Services in Jarrow Tyne and Wear (0191)
  • Jarrow Screed Calculator Service
  • Jarrow Cheap Floor Screeding
  • Jarrow Floor Screeding
  • Jarrow Fast-Dry Floor Screeding
  • Jarrow Floor Insulation
  • Jarrow Floor Damp Proofing
  • Jarrow Domestic Screeding
  • Jarrow Floor Levelling
  • Jarrow Commercial Screeding
  • Jarrow Underfloor Heating Installations
  • Jarrow Polished Screed Floors
  • Jarrow Liquid Screeds
  • Jarrow Screeding Advice
  • Jarrow Fibre Reinforced Floor Screeding

Around Jarrow

In the last year screeded floors were installed in these Jarrow streets: Croft Terrace, Concorde Way, Durham Drive, Cemetery Road, Brayside, Beaumont Terrace, Chestnut Close, Duchess Crescent East, Staple Road, Alnwick Grove, Ashbourne Road, Cheviot Road, Duchess Crescent West, Arndale Arcade, Sherburn Grange South, Dillon Street, Crusade Walk, Coquet Street, Seine Court, Ashfield, Springwell Road, Avon Avenue, Dene Terrace, Saxon Way, Dumfries Crescent, Canon Grove, St Davids Way, and in these Tyne and Wear postcodes: NE32 3DE, NE32 3PW, NE32 3DS, NE32 3SN, NE32 3HA, NE31 1EJ, NE32 3HF, NE32 3QR, NE32 3JH, NE32 3PN.

To read local info on Jarrow, Tyne and Wear check here

Screeding Jobs Jarrow: Get screeding jobs near Jarrow by going here: Jarrow Screeding Jobs

Floor screeding in NE32 area, (dialling code 0191).

TOP - Floor Screeding Jarrow

0191 - Floor Screeding Services Jarrow - Screeding Quotes Jarrow - Screeders Jarrow - Quick-Dry Screeding Jarrow - Screeding Jarrow - Self-Levelling Screeding Jarrow - Screeder Jarrow - Floor Levelling Jarrow