Floor Screeding Harlow Essex (CM20): If you are planning to install under floor heating, have an uneven or damaged floor or are renovating a property or cellar in your Harlow home, it is a good time to think about bringing in a floor screeding professional. Floor screeding provides a smooth finish to a rough sub-base floor, and will allow you to lay your final layer of flooring material, (boards, tiles, carpets etc) over it. If you would like your floors to last then floor screeding is the most important factor in any building or renovation task.
FLOOR SCREEDING EXPERTS HARLOW
A professional screeding company in Harlow will have all the know-how and experience to help you achieve a perfect floor in whatever shape or size of room you are renovating. They will be able to assess the project and ascertain the correct kind of screed you need and how best to apply it.
They will also assess if a structural engineer is required to make sure that any load requirements, point loadings and flex strength are satisfied as laid down in construction and building regulations.
The skills and training that a screeding specialist brings to your project should guarantee a successful outcome and help in extending the life of your floor or floors. A correct blend of screed and the techniques used in laying it are also crucial to ensure the ultimate quality of your floor surface.
Before deciding upon a screeding specialist from those operating in the Harlow area, ask to what standard of finish they are basing their estimate, and also make sure that you get two or three quotes from different screeders. For residential properties a quotation will usually be given for an SR (Surface Regularity) standard of SR1 or SR2. SR1 is the highest standard, and while SR2 and SR3 may be more cost-effective initially, they do not guarantee a totally even or flat surface. This means that you may have to correct any areas that might cause problems when laying your final flooring solution.
The regulations and guidelines set out in in the British Standards BS8204 have to be followed by all Harlow floor screeding companies and they should also hold accreditation with the manufacturers of specialist screeding materials (Cemfloor, Flowcrete, Gypsol etc.) to substantiate their safe working practices and competence. This accreditation scheme highlights a firm's performance and training in the use of a manufacturer's merchandise.
Harlow commercial screeders might be involved in floor screeding in warehouses, shops, factories, schools, salons and hospitals.
TYPES OF SCREED
Standard Screeds - Widely used in domestic flooring projects where the combination of cement and sand is okay for basic footfall usage. This mixture uses a 5:1 ratio of sand to cement. Once its been laid this 5:1 ratio will dry at a rate of 1mm per day.
Polymer Screeds - Provides a high level of strength with a lower thickness. Polymer screeds are available from many screed manufacturers and due to their varying chemical compositions have distinct drying times for each product.
Self-Levelling or Liquid Screeds - Used to provide a high quality finish, especially where SR1 levels are essential, by a latex and cement material. It's largely used to provide a high quality floor over a poor quality or damaged substrate and results in a surface finish onto which all sorts of flooring materials can be laid. Even with a depth of only 1mm, the latex polymers within the mixture provide a high strength screed for a variety of uses.
Industrial and Heavy Duty Screed - Developed for maximum durability and strength on floors where traffic is expected to be high or heavy loading on the floor base is necessary.
Advanced Drying and Fast Drying Screeds - As the name suggest, these screeds dry quickly and allow you to use the floor area much sooner. These are usually a fibre reinforced kind of screed which can dry out at a rate of between 3-7mm/day per day and are employed in time critical flooring projects.
Fibre Reinforced Screed - The professional's choice for domestic use on top of under floor heating. This is due to the improved durability and protection against thermal cracking and shrinkage provided by the special fibres within the screed. The screed will dry out at a rate of roughly 1mm/day.
SCREEDING PREPARATION AND INSTALLATION
Good preparation is essential for a quality finished screed surface that will be durable and hard wearing. It's crucial that any contaminants such as debris, grease, paint or oil is eliminated from the base before laying any screed, because these can affect the adhesion process that a quality floor screed requires.
If cleaning products have been used it's vital to remove any traces of detergent, soap etc, and allow the surface to dry naturally. It's vital to repair any cracks in the surface to prevent them being visible and "travelling" up into your freshly screeded floor. A site survey will allow your Harlow screeding company to identify this preparation work and tackle it before starting to pour the screeding.
To shield the screeding layer and flooring materials from moisture rising up from the ground, a DPM (damp proof membrane) must be laid. Different gauges of special polythene may be used as a damp proof membrane and also serve as a buffer for the screed and any insulation panels.
A supplementary airtight barrier might be required if your house is in an area which is regarded as prone to radon gas. If radon gas is present in large amounts then a complete ventilation and extraction system might be needed under the layer of screed which will remove any gases that might seep in from ground level.
As soon as these stages have been completed the screeders will put on a primer or sealant to the prepared floor base. Primers help the bonding process and are specialist applications according to the kind of screed that's being used. These products require qualified technicians to apply them in the appropriate ratios by using airless sprays and other tailor-made equipment.
If required, this is the time that under floor heating can be laid out in the correct manner and installed. The underfloor heating system will be carefully positioned and firmly mounted on insulation panels to avoid any movement in the course of the screed installation process. Under floor heating is one of the most efficient ways to heat a room and a properly installed system will deliver even warmth in all areas of the floor.
Of course, if you aren't installing under floor heating, you can bypass this step and get on with applying the screed. Your intended use of the room will assist the screeding contractor on what type of floor screed is best for your needs. For quick drying screeds there'll be at least twenty four hours delay before it can be walked over, and a further 3 days minimum before you can lay any flooring materials. Manufacturer's drying guidelines for standard and heavy duty screeds must be observed so as to achieve a quality finish and end up with a stable and even surface.
The SR standard of your screed can be checked once it has set enough to be walked on. The basic SR test uses a 2m long straight-edge to check for any deviations in the screed surface.
- SR1 - SR1 is the highest specification and allows only 3mm of disparity from the straight-edge.
- SR2 - The normal standard flooring in commercial and industrial builds is classed as SR2 and has a maximum possible deviation of 5 millimetres across the entire screeded surface.
- SR3 - For other floors where the quality of finish is relatively immaterial the SR3 is the specification and has a maximum deviation measurement of 10mm or less.
If your screed has been laid with particular load bearing requirements in mind then a qualified structural engineer is going to be required to carry out the assessment. This assessment will establish the overall strength of the screed surface and its suitability for the intended use. A "drop hammer test" is conducted at several areas on the screed and the results noted. The precise measurement and testing tools required mean that this can only be conducted by a trained structural engineer heeding the BS8204 guidelines. (Tags: Floor Screeding Services Harlow, Floor Screed Harlow, Screeding Harlow, Floor Screeding Harlow).
Floor screeding services are available in Harlow and also in nearby places like: Halls Green, Tye Green, Newhall, Gilston, Brays Grove, Matching Tye, Temple Fields, Epping Green, Roydon, Old Harlow, Church Langley, North Weald Bassett, Chipping Ongar, Bush Fair, Nazeing, and in these postcodes CM17 0AT, CM17 0LY, CM17 0DH, CM17 0ED, CM17 0HA, CM17 9BX, CM17 0SB, CM17 9AR, CM17 0SE, CM17 9AL. Locally based Harlow floor screeders will most likely have the postcode CM20 and the phone code 01279. Simply click the "quote" banner to get specifics of screeding services in your location.
Tools Needed by a Floor Screeding Specialist
- Tape Measure
- Straight Edge
- Spiked Roller
- Knee Protection
- Heavy Duty Spirit Level
- Floor Profile
There is a range of work that can be carried out by your local Harlow floor screeding specialist including shop floor screeding, garage screeding, quick-dry screeds, fibre reinforced screeding in Harlow, polished floor screeding, domestic floor screeding Harlow, floor screed repairs, screeding advice, concrete pumping, cellar floor screeding in Harlow, underfloor heating installation, floor screeding price quotes, floor screed testing, acoustic flooring in Harlow, liquid screeds, floor repairs in Harlow, floor insulation, office floor screeding Harlow, and more floor screeding tasks.
Floor Screeding Essex
In the Essex area you'll also find: Fryerning floor levelling, Elmstead Market floor screeders, Ardleigh floor screeding, Doddinghurst floor screeders, Tillingham floor levelling, Stock floor screeders, Ongar screeding, Rawreth floor screeders, Panfield floor screeders, Ingrave screeding, Langdon Hills screeding specialists, Wyatts Green screeding, North Fambridge screeding, Little Waltham screeding specialists, Little Leighs floor screeders, Maylandsea screeding specialists, Little Baddow floor screeding, North Weald Bassett floor levelling, Aveley screeding specialists, Chafford Hundred floor screeders, Birch floor screeding, North Fambridge floor levelling, Purfleet screeding, Bradwell on Sea screeding specialists, South Woodham Ferrers floor levelling, Latchingdon screeding specialists, Chipping Ongar floor levelling, Lawford floor screeding, Herongate screeding specialists.
Floor Screeding Near Harlow
Also: Church Langley screeding, Bush Fair screeding, Gilston screeding, Nazeing screeding, Roydon screeding, Matching Tye screeding, Tye Green screeding, Chipping Ongar screeding, Halls Green screeding, Epping Green screeding, Old Harlow screeding, Newhall screeding, North Weald Bassett screeding, Temple Fields screeding, Brays Grove and more.
- Harlow Indistrial Screeding
- Harlow Fibre Reinforced Floor Screeding
- Harlow Cheap Floor Screeding
- Harlow Underfloor Heating Installation
- Harlow Screeding Advice
- Harlow Screed Calculator Service
- Harlow Floor Levelling
- Harlow Fast-Dry Floor Screeding
- Harlow Floor Screeding
- Harlow Polished Screed Floors
- Harlow Floor Damp Proofing
- Harlow Floor Insulation
- Harlow Screeding Services
- Harlow Residential Screeding
Households in Tilegate Road, The Readings, Charters Cross, The Gardiners, Spencers Croft, The Mews, Commonside Road, The Fortunes, Seymours, Carters Mead, Sakins Croft, St Johns Avenue, The Seeleys, The Hoo, The Mallories, Tye Green Village, Brook Lane Field, Station Approach, The Dashes, Southern Way, Canons Gate, Stantons, Church Leys, Chapel Field, Colt Hatch, Broadfield, Tracyes Road, Tylney Croft, Dobbs Weir Road, South Gate, have needed floor screeding recently. Screeding work was also completed in these local Harlow postcodes: CM17 0AT, CM17 0LY, CM17 0DH, CM17 0ED, CM17 0HA, CM17 9BX, CM17 0SB, CM17 9AR, CM17 0SE, CM17 9AL.
Other Useful Trades in Harlow Essex
Undoubtedly, whenever you happen to be doing home improvements in Harlow, Essex, you are likely to need all kinds of different tradespeople and along with a floor screeder in Harlow, Essex, you could also need an underfloor heating specialist in Harlow, a carpet fitter in Harlow, rubber flooring in Harlow, a carpenter in Harlow, a floor tiler in Harlow, solid wood flooring in Harlow, a bricklayer in Harlow, a building contractor in Harlow, a handyman in Harlow, a heating engineer in Harlow, an electrician in Harlow, a plumber in Harlow, a plasterer in Harlow, waste removal in Harlow, and other different Harlow tradesmen.
For the latest local information about Harlow, Essex take a look here
More Saffron Walden, Waltham Abbey, South Woodham Ferrers, Stanford-le-Hope, Canvey Island, Southend-on-Sea, Colchester, Clacton-on-Sea, Grays, Witham, Brentwood, Harwich, Maldon, Rayleigh, South Ockendon, Rochford, Rainham, Billericay, Braintree, Chelmsford, Basildon, Harlow, Wickford and Loughton.:
Floor screeding in CM20 area, and dialling code 01279.
Screeding Services Harlow - Floor Screeding Harlow - 01279 - Domestic Screeding Harlow - Floor Screeding Estimates Harlow - Screeder Harlow - Floor Levelling Harlow - CM20 - Screeders Harlow