Floor Screeding Witham

Witham Screeding & Floor Levelling Services

Floor Screeding Witham Essex (CM8): If you have a damaged or uneven floor, are looking to install underfloor heating or are restoring a property or cellar in your Witham home, then it's the perfect time to think about contacting a professional floor screeder. Floor screeding gives a smooth, level finish to a coarse sub-base, and allows you to lay a suitable flooring material, (carpets, boards, tiles etc) on top of it. The screed is a vital process to ensure a durable and quality finish to the whole floor surface.

Free Witham Floor Screeding Quotes

FLOOR SCREEDING COMPANIES WITHAM

It doesn't matter how big or small the room you need levelling, a genuine screeding company in Witham will have the essential equipment, know-how and skills to offer you an excellent level of service. They'll be able to advise you on the correct kind of screed your project requires, and how best to apply and install it.

Floor Screeding Witham Essex (CM8)

The screeding contractor will also notify you if a structural engineer is necessary for your project, to evaluate load bearing, flex strength and point loadings that your flooring may require to conform with current building regulations and British Standards.

Bringing in a skilled and qualified contractor will guarantee that you get the correct form of screed for the room's proposed usage to extend the lifetime of your flooring. Choosing the appropriate screeding materials and the method of installation is crucial if you want a quality and durable finish for your floor.

There are several screeding companies in and around Witham so see if you can get multiple estimates for your screeding project before choosing a contractor and know to what standard of finish it's for. For domestic homes a quotation will usually be provided for a Surface Regularity (SR) calculation of SR1 or SR2. SR1 is the best level, and while SR2 and SR3 may be less costly at first glance, they don't guarantee a perfectly even or flat floor surface. Any error in the screeding (as might occur with SR2 or SR3) may cause issues with laying flooring owing to indentations, flat spots, ridges in the surface.

Floor Screeders Witham (01376)

British Standards BS8204 lays down the regulations and guidelines that all Witham screeding contractors are required to follow, and if applying specialist screeding solutions, (Cemfloor, Flowcrete, Gypsol etc), they ought to be certified by the manufacturers as being skilled and trained in their use. This accreditation program showcases a firm's ability and training in the use of a manufacturer's screeding merchandise.

For the screeding of floors in shopping centres, warehouses, restaurants, factories, hospitals and schools, dedicated Witham commercial screeders will be needed.

TYPES OF SCREED

Standard Screeds - Frequently used in residential projects where the blend of sand and cement is perfectly acceptable for standard floor traffic use. The ratios involved in standard screeds are 5 parts sand to 1 part cement. This five to one ratio standard flooring screed will set hard at a rate of just 1mm per day after laying.

Industrial and Heavy Duty Screed - Made for maximum durability and strength in areas where traffic is high or heavy loading on the floor base is required.

Fast Drying and Advanced Drying Screeds - As the name suggest, this screed dries at a quicker rate and allows you to use the floor area much sooner. Most of the fast drying screeds are fibre reinforced and are suitable for a wide variety of projects where the speedier curing rate of 3-7mm is an advantage.

Polymer Screeds - Provides an extremely high level of strength with a minimal thickness. The curing times vary in accordance with product guidelines.

Screeding Quotes Witham Essex

Liquid or Self-Levelling Screeds - When the highest possible standard of finish is necessary this mixture of cement and latex is employed to create SR1 level screeding. Mainly used to finalise a poor substrate level or damaged floor in order to lay a new flooring surface, like tiling on top of it. These can be as little as one millimetre thick, and because of the latex polymers, will still provide a high strength finish.

Fibre Reinforced Screed - The preferred choice by professional installers for use in combination with underfloor heating systems. The greater flexibility and strength provided by the fibres within this screed mix help protect the resulting floor from cracking and shrinkage due to heat. It's got a setting rate of 1mm per day.

SCREEDING PREPARATION AND INSTALLATION

Preparation is vital for a high quality screed surface that will be durable and hard wearing. The existing floor surfaces should be cleaned to eradicate any grease, debris, paint and oil which can adversely affect the bond of the screed.

Screeding Near Witham (CM8)

Any cleaning chemicals that are used in this phase shouldn't leave any residues, and the floor base must be permitted to dry by itself naturally. It's necessary to mend any cracks in the floor surface to prevent them being mirrored and "travelling" up into your freshly screeded floor. During a site survey your Witham screeding specialist will ascertain what preparations are needed before starting to work on the screeding.

To protect the screeding layer and flooring materials from moisture rising up through the ground, a DPM (damp proof membrane) will have to be installed. There might be 2 or 3 layers of varying thickness polythene to act as barriers between the insulation layer and screed.

If the area is susceptible to radon then a further barrier is essential to stop the gas from entering from the ground. A simple air-tight membrane may be sufficient in areas with relatively low levels of radon, but in more severe situations there may need to be a more sophisticated extraction system to remove any harmful radon gases.

As soon as the base has been prepared and any DPMs installed, a sealer or primer is then put on. These primers and sealers will make sure that the screed bonds properly to the base surface and help to accomplish a top quality finished floor. Equipment such as airless sprays will usually be used to apply a sealant or primer, by qualified screeding installers in Witham sticking to the manufacturer's guidelines and safety advice.

Before the screeding is laid, any underfloor heating (if required) will now be installed. The underfloor heating system is laid out in the correct pattern and attached firmly to insulation panels to avoid any movement in the course of the screed pouring. Underfloor heating is one of the most efficient ways to heat a room and a professionally installed system should provide even warmth across the floor area.

Floor Screed Witham (01376)

The screed can now be mixed and prepared in situ and spread onto the base. Your proposed use of the room will assist your screeding specialist on what sort of screed is perfect for your needs. Bear in mind that even advanced and quick drying screeds have a minimum of twenty four hours before you are able to walk on any screeded surface and at least three days before any flooring materials can be applied. If you are using standard or heavy duty screeds the setting time is increased and the manufacturer's guidelines must be followed so as to get the best possible finish for your floor.

You can evaluate the SR level of the finished screeding once it's hard enough to walk on. The test involves using a 2 metre long straight-edge laid down upon the floor surface and any variations from true are calculated.

  • SR1 - SR1 is the highest standard and allows just 3 millimetres of deviation from the straight-edge.
  • SR2 - The normal standard flooring in industrial and commercial builds is normally SR2 and has a maximum possible deviation of 5mm across the entire screed.
  • SR3 - SR3 is basic utility standard where a perfect quality finish isn't needed. This specification allows for a maximium deviation depth of 10mm.

There might also be a requirement for a qualified structural engineer to carry out a soundness test. Using specialised equipment the structural engineer will assess the screeding strength and its suitability for use in a load bearing setting. The screed layer should be given what's known as a "drop hammer test" to measure strength and flexibility in various areas. Any screed flooring that has point load requirements must be sanctioned by a certified structural engineer following the British Standards BS8204 guidelines. (Tags: Floor Screeding Services Witham, Screeding Witham, Floor Screed Witham, Floor Screeding Witham).


Floor screeding services are available in Witham and also in nearby places like: Wickham Bishops, Terling, Rivenhall, Little Braxted, Boreham, Fairstead, Little Baddow, White Notley, Great Braxted, Hatfield Peverel, Gore Pit, Langford, Rivenhall End, Great Totham, Ulting, Kelvedon, and in these postcodes CM8 1NE, CM8 1GU, CM8 1HX, CM8 1PJ, CM8 1PX, CM8 1JP, CM8 1HN, CM8 1FS, CM8 1DP, CM8 1JX. Locally based Witham floor screeders will most likely have the postcode CM8 and the phone code 01376. Click the "quote" banner or form to get details about screeding services in your location.

Book a Screeder in Witham UK

Related Tasks

Screeding Related Tasks Witham

There is a range of work that can be carried out by your local Witham floor screeding specialist including floor screeding tools, polished screeding in Witham, shop screeding, floor levelling, self-levelling screeding, screeding advice, underfloor heating installation in Witham, floor preparation services, screed repairs, basement floor screeding in Witham, domestic floor screeding, garage floor screeding, liquid screeds, waterproof floor screeding in Witham, conservatory floor screeding in Witham, concrete pumping, floor insulation, rapid strength floor screeding, and more floor screeding tasks.

WITHAM FLOOR SCREEDING QUOTES (CM8)

Floor Screeding Near Witham

Also find: White Notley screeding, Gore Pit screeding, Terling screeding, Little Baddow screeding, Great Totham screeding, Hatfield Peverel screeding, Langford screeding, Wickham Bishops screeding, Rivenhall screeding, Ulting screeding, Great Braxted screeding, Rivenhall End screeding, Boreham screeding, Fairstead screeding, Kelvedon screeding, Little Braxted screeding services and more.

Floor Screeding Services Witham

Find Floor Screeding in Witham Here
Screeding Services in Witham Essex (01376)
  • Witham Fibre Reinforced Screeding
  • Witham Screeding Services
  • Witham Floor Levelling
  • Witham Screeding Advice
  • Witham Screed Calculator Service
  • Witham Floor Damp Proofing
  • Witham Polished Screed Floors
  • Witham Residential Floor Screeding
  • Witham Floor Insulation
  • Witham Commercial Floor Screeding
  • Witham Floor Screeding
  • Witham Underfloor Heating Installations
  • Witham Liquid Screeds
  • Witham Fast-Dry Floor Screeding

Around Witham

Households in Bristol Court, Claudius Way, Ashby Road, Brock Close, Templars Close, Blackwater Lane, Chippingdell, Trent Road, Don Court, Benton Close, Blunts Hall Road, Barleyfields, Church Road, Briarsford, Speedwell Close, The Newlands, Broomfield, Allectus Way, Birch Rise, Sauls Bridge Close, Beech Green, Boars Tye Road, Birch Close, Spinks Lane, Sexton's Lane, Denholm Court, have needed floor screeding recently. Screeding work was also undertaken in these Witham area postcodes: CM8 1NE, CM8 1GU, CM8 1HX, CM8 1PJ, CM8 1PX, CM8 1JP, CM8 1HN, CM8 1FS, CM8 1DP, CM8 1JX.

For the best local Witham info take a look here

Floor screeding in CM8 area, 01376.

TOP - Floor Screeding Witham

Domestic Screeding Witham - 01376 - Self-Levelling Screeding Witham - Floor Levelling Witham - CM8 - Industrial Screeding Witham - Screeding Estimates Witham - Floor Screeding Services Witham - Screeding Witham

HOME