Floor Screeding Wallsend

Wallsend Screeding & Floor Levelling Services

Floor Screeding Wallsend Tyne and Wear (NE28): A professional floor screeder can assist with renovations, level a damaged or uneven floor or help install underfloor heating on your Wallsend home or business premises, when needed. A screed is used to create a smooth floor surface over a rough concrete sub-base and provide a level base for your choice of top flooring material. If you would like your floors to last a long time then a floor screed is the most important factor in any building or renovation task.

Free Wallsend Floor Screeding Quotes

FLOOR SCREEDING EXPERTS WALLSEND

Whatever shape or size of room you are remodeling, a screeding contractor in Wallsend can provide you with the expertise and proper working practices to generate a perfect base for your flooring. They'll assess your project and ascertain the appropriate type of screed you require and the best strategy for applying it.

Floor Screeding Wallsend Tyne and Wear (NE28)

It may be a requirement, based on the intended use of the room, for a survey by a structural engineer to conform with building regulations on load bearing, point loadings and flex strength of the screed floor.

Qualified and skilled workers are imperative for a successful result and will extend the lifespan of your floor by making use of the right type of screed for the intended purpose of your room. There are many types of floor screed and picking the correct mix and installation method is vital if you are to create a top quality floor which is fit for purpose and long-lasting.

Before deciding on a floor screeding company from any operating in the Wallsend area, ask to what standard of finish they're basing their quote, and also make sure that you get multiple price quotes. The SR (Surface Regularity) finish is the figure to watch out for when getting a quotation from Wallsend screeding contractors. SR2 and SR3 may be more affordable options, although the finished floor surface might have errors and deviations, whilst SR1 guarantees a pretty much perfect quality of finish. Any error in the screeding can cause issues with laying flooring due to indentations, ridges, flat spots in the surface.

Floor Screeders Wallsend (0191)

All Wallsend screeding contractors must comply with British Standards (BS8204) and ought to have some kind of accreditation from screeding material and equipment manufacturers, e.g. Gypsol, Flowcrete, Cemfloor. A contractor holding such accreditation indicates they've been assessed and trained in using these screeding products and can deliver a top notch service in all aspects of their installation.

For larger floor screeding projects in hospitals, shopping centres, schools, salons, warehouses and factories, dedicated commercial screeders in Wallsend will be required.

TYPES OF SCREED

Standard Screeds - A mix of cement and sand which is good for basic residential use. The ratios involved are 5 parts sand to 1 part cement. The standard flooring screed will dry at a rate of one millimetre thickness per day.

Fibre Reinforced Screed - Used with under floor heating and is the advised option in such projects. This is because of the increased strength and protection against thermal cracking and shrinkage offered by the special fibres within the screed mix. The screed will set hard at a rate of roughly 1mm/day.

Industrial and Heavy Duty Screed - A screed that's designed for high load and heavy traffic areas where maximum strength and durability is vital.

Fast Drying and Advanced Drying Screeds - As the name would suggest, these screeds dry rapidly and allow you to use the screeded area much sooner. The vast majority of the fast drying screeds are of the fibre reinforced kind and are perfect for a wide range of flooring projects where the quicker drying rate of 3-7mm is advantageous.

Polymer Screeds - Provides a high level of strength with a minimal thickness. The drying times for these vary according to product guidelines.

Screeding Quotes Wallsend Tyne and Wear

Self-Levelling or Liquid Screeds - When a high standard of finish is required this solution of cement and latex is used to produce SR1 level screed flooring. The self-levelling compound provides a clean and level surface over a rough substrate or damaged floor to allow all flooring materials to be laid. These can be as little as one millimetre thick, and because of the latex polymers, will still provide high strength.

SCREEDING PREPARATION AND INSTALLATION

Preparation is vital for a high quality screed surface that will be durable and hard wearing. The original floor surface should be thoroughly cleaned to eliminate any grease, debris, paint and oil which can affect the adhesion of the screed.

Screeding Near Wallsend (NE28)

If any cleaning products were used during this stage it's important to ensure that no residues of soaps, detergents or other cleaning products are left on the surface and it is allowed to dry out naturally. If screeding over a cement or stone floor any cracks should be mended to prevent them from "travelling" through your screed layer and causing imperfections on the finished surface. An on-site survey will allow the screeding contractor to highlight these preparation areas and complete them before beginning to pour the screeding layer.

Before any screeding can be laid a damp proof membrane (DPM) must be put down to shield the screed and final flooring from dampness. Different gauges of specialised polythene could be used as a damp proof membrane and also serve as a buffer for the screed and any insulation panels.

An additional air-tight barrier may be necessary if your house is in a location that is known to be susceptible to radon gas. If radon gas is present in large amounts then a complete ventilation system might be needed beneath the screed which will remove any gases that could seep in from the ground.

The final stage of the surface preparation process is the spraying or painting of a primer or sealer. A primer assists in the screed to successfully bond to the base and membranes and different varieties exist based on which type of screed is being applied. These products require professional tradesmen to apply them in the correct ratios by using airless sprays and other bespoke equipment.

If you are going to be installing under floor heating, now is the time that it will need to be properly laid out and installed. Insulation panels will be positioned and the wires and heating pipes will be securely attached so that there is no movement whilst the screed is being poured. Underfloor heating is one of the most efficient ways to heat a room and a professionally installed system should give an even warmth in all areas of the floor.

Floor Screed Wallsend (0191)

The screeding can now be prepared on site and poured onto the base. Your screeding contractor will give you advice and guidance on which screed type is suitable for your requirements, in line with your intended use of the room. After application of the screed there'll be at least 24 hours (for advanced and quick drying screeds) before you are able to walk over the surface, and a seventy two hour minimum curing period for the laying of any floor coverings. If you are aiming to wind up with a nicely finished and long-lasting floor surface you should stick to the manufacturer's guidelines with regard to standard and heavy duty screeds where the timescale will be longer.

The SR level of your screed can be verified once it has set enough to be stepped onto. The standard SR test uses a two metre long straight-edge to check for any deviations in the screed surface.

  • SR1 - Disparities of three millimetres or less being measured across the entire area shows your screed floor to be of the finest quality and is categorised as SR1.
  • SR2 - The standard flooring in commercial and industrial builds is classed as SR2 and has a maximum deviation of five millimetres across the whole floor surface.
  • SR3 - SR3 is utility standard where a perfect finish is not required. This classification allows for a maximium deviation of 10 millimetres.

If your screed floor has been laid with specific load bearing requirements in mind then a qualified structural engineer is going to be necessary to conduct these soundness tests. The assessment will ensure your new screed is suitable for the load point requirements specified in the original site survey. This will include a "drop hammer test" which assesses various aspects of the strength and flexibility of the screed. The precise testing and measurement tools required mean that this can only be conducted by a competent structural engineer following the BS8204 guidelines. (Tags: Screeding Wallsend, Floor Screed Wallsend, Floor Screeding Wallsend, Floor Screeding Services Wallsend).


Floor screeding services are available in Wallsend and also nearby in: Heaton, North Shields, Battle Hill, Walkergate, Forest Hall, Walkerville, Willington Quay, High Heaton, Benton Square, Howdon, Holystone, Murton, Longbenton, Willington, Hebburn, Rosehill, and in these postcodes NE27 0QJ, NE28 5DQ, NE28 0DJ, NE28 0JN, NE28 0LB, NE12 9SJ, NE28 0AR, NE28 0LG, NE28 0PD, NE28 0JP. Locally based Wallsend floor screeders will probably have the telephone dialling code 0191 and the postcode NE28.

Book a Screeder in Wallsend UK

Related Tasks

Screeding Related Tasks Wallsend

There are a number of different tasks that can be completed by your local Wallsend floor screeding company including floor screed testing, floor screeding, shop floor screeding, residential floor screeding in Wallsend, floor levelling, floor screeding tools Wallsend, bonded concrete screeding, screeding quotations in Wallsend, floor screed repairs, damp proof membranes, floor restoration in Wallsend, cheap screeding, floor screeding advice Wallsend, polished screeding, concrete pumping Wallsend, fibre reinforced screeding Wallsend, underfloor heating installations, commercial screeding Wallsend, and more floor screeding tasks.

Tyne and Wear Screeding Enquiries

Floor Screeding Enquiries Tyne and Wear

Current Tyne and Wear floor screeding job posts: Bronte Britton recently asked for an estimate for screeding the floor of a workshop in Newburn. Lorena Britton recently enquired about getting a price for screeding the floor of a kitchen in Backworth, Tyne and Wear. Reagan and Nala Rodgers recently enquired about the possibility of screeding the floor of a kitchen and lounge in a detached house in Low Fell. Alex Polson and Enid Polson recently enquired about getting a price for screeding a floor and installing underfloor heating in Killingworth, Tyne and Wear. Mr and Mrs Wiltshire recently enquired about getting a price for screeding over an old concrete floor in Hetton le Hole, Tyne and Wear. Skylah Sayers recently asked for a quote for screeding the floor of a utility room in Crawcrook, Tyne and Wear. Devon and Ashleigh Wade recently asked for a quotation for screeding a garage floor in Woolsington, Tyne and Wear. Zaki and Lexi Hawkes recently asked for an estimate for screeding the floor of a living room in Fence Houses.

The Tools Required for Screeding Floors

  • Knee Protectors
  • Straight Edge
  • Gloves
  • Floor Profiler
  • Spiked Roller
  • Spade
  • Trowel
  • Float
  • Heavy Duty Spirit Level
  • Tape Measure
  • Wheelbarrow

Floor Screeding Tyne and Wear

Tyne and Wear Screeders Near Me

Around Tyne and Wear you will also find: Burdon floor screeders, Whickham floor screeding, The Boldons floor screeders, Ryton screeding, Whickham floor screeders, Birtley floor levelling, Boldon Colliery floor screeding, Woolsington floor screeders, Blaydon on Tyne floor screeders, Crawcrook floor screeders, Woolsington screeding specialists, Blaydon on Tyne screeding, Annitsford floor levelling, Burdon floor screeding, Sunniside screeding, Rowlands Gill floor screeders, Throckley screeding, Throckley floor levelling, Wideopen floor screeders, Benton floor screeders, Penshaw floor levelling, Penshaw screeding specialists, Backworth screeding specialists, Cullercoats floor levelling, Low Fell floor levelling, Lobley Hill screeding, Shiremoor screeding specialists, Burdon screeding.

WALLSEND FLOOR SCREEDING QUOTES (NE28)

Floor Screeding Near Wallsend

Also find: Forest Hall screeding, Willington Quay screeding, Walkerville screeding, Benton Square screeding, Holystone screeding, Longbenton screeding, Hebburn screeding, North Shields screeding, Rosehill screeding, Walkergate screeding, Heaton screeding, Willington screeding, Murton screeding, Battle Hill screeding, High Heaton screeding, Howdon screeding services and more.

Floor Screeding Services Wallsend

Find Floor Screeding in Wallsend Here
Screeding Services in Wallsend Tyne and Wear (0191)
  • Wallsend Fast-Dry Floor Screeding
  • Wallsend Floor Damp Proofing
  • Wallsend Screeding Services
  • Wallsend Floor Insulation
  • Wallsend Commercial Screeding
  • Wallsend Cheap Floor Screeding
  • Wallsend Floor Screeding Advice
  • Wallsend Floor Screeding
  • Wallsend Floor Levelling
  • Wallsend Screed Calculator Service
  • Wallsend Liquid Screeds
  • Wallsend Underfloor Heating Installations
  • Wallsend Polished Screed Floors
  • Wallsend Domestic Screeding

Around Wallsend

Some Wallsend areas and roads where screeding work has recently been done - Blackthorn Drive, Tiberius Close, Boston Close, Savory Road, Brooksmead, Andover Place, Bishops Close, The Crescent, Blackhill Avenue, Carville Road, Boreham Close, Bexley Gardens, South Terrace, Bigges Gardens, Chelford Close, Thompson Gardens, Archers Villas, Barwell Close, Birch Grove, Aysgarth Avenue, Stadium Villas, Buxton Close, Beckenham Gardens, Appleby Gardens, Douglass Street, Burn Avenue, Swan Avenue, as well as the following Wallsend area postcodes: NE27 0QJ, NE28 5DQ, NE28 0DJ, NE28 0JN, NE28 0LB, NE12 9SJ, NE28 0AR, NE28 0LG, NE28 0PD, NE28 0JP.

Wallsend Screeding Jobs: Get floor screeding jobs near Wallsend by going here: Wallsend Screeding Jobs

To read local Wallsend information look here

Floor screeding in NE28 area, telephone code 0191.

TOP - Floor Screeding Wallsend

HOME