Floor Screeding Penrith

Penrith Screeding & Floor Levelling Services

Floor Screeding Penrith Cumbria (CA11): A professional floor screeder can assist with renovations, level a damaged or uneven floor or help install underfloor heating on your Penrith property, when necessary. A screed is used to produce a smooth floor over a rough concrete sub-base and provide a firm foundation for your choice of top flooring material. If you would like your floors to last then floor screeding is one of the most important factors in any renovation or building task.

Free Penrith Floor Screeding Quotes


Whatever shape or size of room or area you are remodeling, a local screeding contractor in Penrith will supply the expertise and correct working practices to generate the perfect base for your floors. They'll assess your project and ascertain the appropriate sort of screed you need and the best strategy for applying it.

Floor Screeding Penrith Cumbria (CA11)

They will additionally assess if a structural engineer is needed to make sure any point loadings, load bearing and flex strength are satisfied in accordance with the building regulations.

The skills and training that a screeding technician brings to your project will guarantee a successful end result and help in prolonging the lifespan of your flooring. There are numerous kinds of screed and picking the appropriate mix and installation technique is crucial to create a quality floor which is hard-wearing and fit for purpose.

Before deciding on a screeding company from those operating in the Penrith area, ask to what standard of finish they're basing their quotation, and also ensure you get multiple quotations. For residential properties a quotation will generally be given for a Surface Regularity (SR) level of SR1 or SR2. SR1 is the best level, and while SR2 and SR3 may be less expensive at first glance, they don't guarantee a perfectly even or flat surface. This means you may need to fix any areas that may cause problems when putting down your finished flooring material.

Floor Screeders Penrith (01768)

British Standards BS8204 lays out the regulations and guidelines that all Penrith screeding companies must follow, and if working with specialist screeding solutions, (Gypsol, Flowcrete, Cemfloor etc), they should be approved by the manufacturers as being skilled and trained in their use. A contractor holding accreditation demonstrates they've been trained and assessed in the use of these screeding products and can deliver a high standard of service in all areas of their installation.

Commercial screeders in Penrith will probably tackle larger screeding projects in hospitals, shopping centres, warehouses, factories, hotels and schools.


Standard Screeds - This is ideal for everyday domestic usage and comprises a mixture of cement and sand. Five parts sand to one part cement is the normal mix for standard screed. The standard flooring screed dries at a rate of 1mm thickness each day.

Fibre Reinforced Screed - The expert's choice for residential use over the top of under floor heating. The fibres in the screed enhance it's strength and durability while also protecting against thermal cracking and shrinkage. At about 1mm per day, it has the same drying rate to standard screed.

Self-Levelling or Liquid Screeds - A latex and cement formula which can produce the highest standard SR1 finish. Mostly used to finalise a poor substrate level or damaged floor in order to lay a new flooring surface, such as tiling on the top of it. Even with a thickness of only one millimetre, the latex polymers within the screed provide a high strength surface for a wide variety of uses.

Advanced Drying and Fast Drying Screeds - If there is a need to use the floor ASAP a fast drying screed can be employed. They are typically a fibre reinforced kind of screed which can dry out at a rate of between 3-7mm per day and are employed in time-sensitive flooring projects.

Screeding Quotes Penrith Cumbria

Industrial and Heavy Duty Screed - A screed that's designed for heavy traffic and high load areas where maximum durability and strength is necessary.

Polymer Screeds - When a lower thickness of floor is required on account of building factors, a polymer screed provides an extremely high strength solution to the situation. Polymer screeds are available from a number of screed manufacturers and owing to their diverse chemical compositions have distinct drying times for each product.


Screeding companies will have to carefully prepare all areas before proceeding with any other work so as to guarantee a hard wearing and quality screed flooring. It is vital that any contaminants such as grease, paint, debris or oil is removed from the base before pouring any screed, because these can affect the adhesion process that a quality screed demands.

Screeding Near Penrith (CA11)

If cleansing products were used it is vital to remove any remnants of soap, detergent etc, and allow the surface to dry naturally. It is essential to mend any cracks in the surface to avoid them being mirrored and "travelling" upwards into your freshly screeded floor. A reliable Penrith screeding contractor will take note of these issues during the on-site survey and ensure that all preparations are complete before applying the next stages of the screeding process.

Before any screeding can be laid a DPM (damp proof membrane) will have to be put down to protect the screed and final flooring from moisture. The DPM is made of thick polythene and various layers may be used to act as a moisture barrier and air insulating layer for the screed.

If the area where you live is susceptible to radon then a further barrier is essential to prevent this harmful gas from entering from the ground. An airtight membrane may be sufficient in areas with relatively low radon measurements, however in more serious situations there may need to be a more complex ventilation and extraction system to remove any ground penetrating radon gas.

Once the base has been properly prepared and all membranes installed, a primer or sealer is then put on. Primers help the bonding process and are specialist applications according to the type of screed that's being applied. On account of their specialist nature, only trained screeding contractors in Penrith are capable of using them correctly, safely and through the use of bespoke equipment for the task.

Before any screed can be poured, any underfloor heating will now be installed. Insulation panels can be positioned and the heating pipes and cabling will be firmly mounted so that there is no movement while the screed is being applied. Underfloor heating is one of the most efficient ways to heat a room and a professionally installed system should deliver even level of warmth in all areas of the floor.

Floor Screed Penrith (01768)

The screed can now be mixed and prepared on site and spread onto the floor surface. Your intended use of the room will assist the screeding company on what sort of floor screed is ideal for your needs. For quick drying screeds there will be at least a twenty four hour delay before it is able to be walked over, and a further Three days minimum before any flooring material can be fitted. If you're laying heavy duty or standard screeds the curing time is longer and the manufacturer's guidelines must be followed so as to get the best possible finish to your floor.

Once the screed has hardened it can be checked for quality to verify its SR level. Using a two metre straight-edge the surface is examined for any dips, deviations and ridges in the screed surface.

  • SR1 - SR1 is the best level and allows just 3 millimetres of deviation from the straight-edge.
  • SR2 - The standard flooring in industrial and commercial builds is classed as SR2 and has a maximum deviation of five millimetres across the whole floor surface.
  • SR3 - For a utility area or room where the finish is relatively immaterial SR3 is the standard and should have a deviation measurement of 10 millimetres or less.

If your screed has been installed with specific loading in mind then a structural engineer is going to be required to carry out the tests. This assessment will establish the overall strength of the screeded surface and the viability for its intended use. A drop hammer test will be conducted on several areas of the screed layer and the outcomes noted. The precise measurement and testing tools mean that this can only be performed by a certified structural engineer respecting the British Standards BS8204 guidelines. (Tags: Floor Screeding Penrith, Floor Screeding Services Penrith, Screeding Penrith, Floor Screed Penrith).

Floor screeding services are available in Penrith and also in nearby places like: Plumpton, Brougham, Dacre, Tirril, Askham, Lazonby, Kirkby Thore, Calthwaite, Stainton, Redhills, Skelton, Greystoke, Temple Sowerby, Eamont Bridge, Langwathby, Catterlen, Clifton, and in these postcodes CA11 7FD, CA11 7HA, CA11 7LD, CA11 0DN, CA11 1BN, CA11 1SZ, CA11 7JD, CA11 1AD, CA11 1SQ, CA11 1SL. Local Penrith floor screeders will most likely have the telephone dialling code 01768 and the postcode CA11.

Book a Screeder in Penrith UK

Related Tasks

Screeding Related Tasks Penrith

There is a range of work that can be carried out by your local Penrith floor screeding company including domestic floor screeding, shop floor screeding, rapid strength floor screeding, self-levelling screeding, acoustic flooring, bonded concrete screeding in Penrith, polished floor screeding, floor screeding, fibre reinforced screeding, waterproof floor screeding, conservatory screeding in Penrith, floor repairs, floor screeding advice Penrith, cellar screeding, floor screeding tools, liquid screeds, warehouse floor screeding, screed repairs, and lots more floor screeding tasks.

The Tools That Are Required for Screeding Floors

  • Floor Profiler
  • Shovel
  • Measure
  • Spiked Roller
  • Straight Edge
  • Wheelbarrow
  • Gloves
  • Knee Protectors
  • Heavy Duty Spirit Level
  • Float
  • Trowel

Floor Screeding Near Penrith

Also find: Plumpton screeding, Lazonby screeding, Clifton screeding, Langwathby screeding, Eamont Bridge screeding, Redhills screeding, Askham screeding, Catterlen screeding, Skelton screeding, Dacre screeding, Calthwaite screeding, Stainton screeding, Brougham screeding, Kirkby Thore screeding, Temple Sowerby screeding, Tirril screeding, Greystoke screeding services and more.

Floor Screeding Services Penrith

Find Floor Screeding in Penrith Here
Screeding Services in Penrith Cumbria (01768)
  • Penrith Polished Screed Floors
  • Penrith Floor Levelling
  • Penrith Floor Damp Proofing
  • Penrith Cheap Screeding
  • Penrith Floor Screeding
  • Penrith Fibre Reinforced Screeding
  • Penrith Indistrial Screeding
  • Penrith Screeding Advice
  • Penrith Liquid Screeds
  • Penrith Screed Calculator Service
  • Penrith Floor Insulation
  • Penrith Screeding Services
  • Penrith Fast-Dry Floor Screeding
  • Penrith Residential Floor Screeding

Around Penrith

In the past 12 months screeded floors had been laid in these Penrith streets: Middlegate, Salkeld Road, Greystoke Road, Fairhill Road, Mill Street, Oak Road, Fell Lane, Castle Terrace, Bath Terrace, Sim Court, Cornmarket, Griffin Yard, Lonsdale Terrace, Union Lane, Wilson Row, Sandgate, Pembroke Place, Cherry Gardens, Cross Lane, Hargreaves Court, Milton Street, Netherend Road, Kilgour Street, Castlegate, The Crescent, Howard Street, Bluebell Court, and in these Cumbria postcodes: CA11 7FD, CA11 7HA, CA11 7LD, CA11 0DN, CA11 1BN, CA11 1SZ, CA11 7JD, CA11 1AD, CA11 1SQ, CA11 1SL.

For the best local info regarding Penrith, Cumbria take a look here

Floor screeding in CA11 area, and dialling code 01768.

TOP - Floor Screeding Penrith