Floor Screeding Burslem

Burslem Screeding & Floor Levelling Services

Floor Screeding Burslem Staffordshire (ST5): When you're restoring your Burslem home that has uneven or damaged floors, or perhaps converting a cellar or basement into a useable living space, an experienced floor screeding specialist will be able to help with your home improvements. A screed is used to create a smooth floor over a rough concrete sub-base and provide a good base for you final flooring material. Floor screeding provides a durable, quality floor surface for any room.

Free Burslem Floor Screeding Quotes


It doesn't matter how small or large the area is that you need to be levelled, an established screeding company in Burslem will have the essential equipment, expertise and know-how to provide you with a superb standard of service. They will be able to assess your project and figure out the appropriate kind of screed you require and how best to apply it.

Floor Screeding Burslem Staffordshire (ST5)

They will also assess if a structural engineer is necessary to make certain that any load requirements, flex strength and point loadings are satisfied as laid down in building and construction regulations.

The training and skills that a screeding specialist brings to your project will guarantee a high quality result and help to lengthen the life of your floor or floors. A correct mix of screed and the way it is laid is also critical to guarantee the ultimate durability of your floor.

Before picking out a floor screeding company from the many operating in the Burslem area, ask to what standard of finish they are basing their quotation, and also make certain that you get two or three estimates from different companies. For residential properties an estimate will normally be provided for a Surface Regularity (SR) level of SR1 or SR2. SR1 is the highest level, and while SR2 and SR3 might seem less costly initially, they do not guarantee a perfectly flat or even floor surface. This means you may need to fix any patches that may cause problems when laying your finished flooring material.

Floor Screeders Burslem (01782)

All Burslem screeding installers have to observe British Standards (BS8204) and should have accreditation from the manufacturers of screeding materials and equipment, e.g. Flowcrete, Cemfloor, Gypsol. This accreditation scheme demonstrates a company's ability and training in the application of a manufacturer's product.

For larger screeding projects in warehouses, hotels, hospitals, shops, schools and factories, skilled Burslem commercial screeders will be required.


Standard Screeds - A mix of cement and sand which is ideal for everyday residential usage. The standard screed is a mix of 5 parts sand to one cement. Once laid this 5:1 ratio dries at a rate of 1mm per day.

Industrial and Heavy Duty Screed - A screed that is designed for high load and heavy traffic areas where maximum strength and durability is essential.

Fast Drying and Advanced Drying Screeds - As the name suggest, these screeds dry quickly and allow you to use the screeded area much faster. These are generally a fibre reinforced type of screed that dries out at a rate of between 3-7mm per day and are used in time-sensitive flooring projects.

Screeding Quotes Burslem Staffordshire

Fibre Reinforced Screed - Used with under floor heating and is the suggested choice in these projects. The improved strength and flexibility provided by the special fibres in the screed mix help protect the flooring from thermal shrinkage and cracking. The screed will set hard at a rate of roughly 1mm/day.

Polymer Screeds - A high strength flooring solution where a reduced screed thickness is needed. Because of their different chemical compositions, these polymer screeds have varying setting times which can be verified by reading manufacturer's own product guidelines.

Liquid or Self-Levelling Screeds - Used to produce a high quality finish, especially where SR1 levels are essential, by a latex and cement mixture. It is mostly needed to provide a smooth, level floor over the top of a poor quality or damaged substrate and results in a surface onto which all forms of flooring materials can be laid. Even with a thickness of only 1mm, the latex polymers within the screed provide a high strength surface for a wide variety of uses.


Good preparation is crucial for a quality finished screed surface that will be durable and hard wearing. Any debris, oil, grease and paint on the original floor level can adversely affect the adhesion of the screed, and must be eradicated.

Screeding Near Burslem (ST5)

Any cleansing products that are used in this phase shouldn't leave any residues, and the floor base must be allowed to dry out naturally. It's necessary to fix any crevices or cracks in the base to stop them being reflected and "travelling" upwards into the freshly screeded floor. A genuine Burslem screeding installer will take note of such problems during a site survey and ensure that all preparations are completed before applying the next stages of the floor screeding process.

A DPM (damp proof membrane) will be applied after the preparation work has been completed to stop ground moisture affecting the flooring materials and screed. Different thicknesses of special polythene might be used as a DPM and also serve as a barrier for the screed and any insulation panels.

If the area where you live is at risk from radon gas then an additional barrier is necessary to prevent the gas from entering from the ground. If radon occurs in large amounts then a full extraction and ventilation system might be needed underneath the screed which will extract any gases that might seep in from ground level.

As soon as the floor base has been prepared and all membranes installed, a primer or sealer is then applied. Primers help with the bonding process and are specialist applications according to the type of screed that's being applied. These products need trained tradesmen to apply them in the right proportions by using custom-made equipment, such as airless sprays.

Before any screed is poured, any underfloor heating (if required) will now set out and installed. The cabling and heating pipes are securely attached to insulation panels to stop any movement and ensure they're held in the correct position. When properly installed an under floor heating system is an effective way to warm up a room and high quality screeding retains its heat, creating an even level of warmth right across the floor surface.

Floor Screed Burslem (01782)

If you're not putting in under floor heating the screed will now be prepared in situ and laid. Your screeding contractor will give you advice on which screed type is suitable for your requirements, in line with your intended use of the room area. For quick drying and advanced screeds there will be at least a twenty four hour delay before it is able to be walked on, and a further Three days minimum before you are able to install any flooring materials. Manufacturer's drying instructions for heavy duty and standard screeds should be followed so as to achieve a quality finish and provide a stable and long lasting floor surface.

You can check the SR standard of the finished screed as soon as it is set enough for walking on. The basic SR test uses a 2m long straight-edge to check for any variations in the floor surface.

  • SR1 - SR1 is the highest specification and permits just 3mm of deviation from the straight-edge.
  • SR2 - The normal standard flooring in commercial and industrial builds is classed as SR2 and has a maximum deviation of 5mm across the whole floor surface.
  • SR3 - If the deviation around the whole space is ten millimetres or less the quality of the screeding is specified as SR3 and is suitable for garage and utility areas.

There may also be a requirement for a structural engineer to perform a soundness test. This assessment will determine the overall strength of the screeding and the suitability for its intended use. The screed layer should be subjected to a "drop hammer test" to determine flexibility and strength at distinct points. The precise measurement and testing tools mean that this can only be carried out by a trained structural engineer heeding the British Standards BS8204 guidelines. (Tags: Floor Screeding Services Burslem, Screeding Burslem, Floor Screed Burslem, Floor Screeding Burslem).

Floor screeding services are available in Burslem and also nearby in: Stanfield, Chesterton, Longbridge Hayes, Middleport, Hanley, Bradeley Village, Smallthorne, Porthill, Talke Pits, Longport, Dimsdale, Newcastle-under-Lyme, Bradwell, Tunstall, Wolstanton, and in these postcodes ST6 1BY, ST6 4AQ, ST6 3AJ, ST6 3BX, ST6 1AB, ST6 2AA, ST6 3EW, ST6 1AQ, ST6 3DL, ST6 4GD. Locally based Burslem floor screeders will probably have the phone code 01782 and the postcode ST5.

Book a Screeder in Burslem UK

Related Tasks

Screeding Related Tasks Burslem

There are a number of different tasks that can be undertaken by your local Burslem floor screeder including self-levelling screeding, concrete pumping, industrial floor screeding, hospital floor screeding, underfloor heating installation, floor screeding advice, floor restoration in Burslem, cheap screeding, floor screeding, liquid screeds, waterproof floor screeding Burslem, acoustic flooring, damp proof membranes Burslem, quick-dry screeds, fibre reinforced floor screeding, polished screeding, floor preparation, floor screeding quotations in Burslem, and more floor screeding tasks.

Staffordshire Floor Screeding

Staffordshire Screeders Near Me

Around Staffordshire you can additionally find: Cheadle floor screeders, Biddulph floor levelling, Uttoxeter screeding, Hixon floor levelling, Barlaston floor screeders, Kingsley floor screeders, Essington screeding, Heath Hayes floor levelling, Wombourne floor levelling, Norton Canes floor levelling, Endon floor screeding, Uttoxeter screeding specialists, Kingsley floor screeding, Upper Tean screeding, Fenton screeding, Bednall floor screeding, Wigginton screeding, Rugeley screeding specialists, Armitage screeding, Gnosall floor screeders, Bednall screeding specialists, Cheddleton floor screeding, Caverswall screeding specialists, Alton floor screeding, Seighford floor screeding, Cheddleton floor levelling, Branston floor screeding, Burton screeding specialists, Essington floor levelling, Handsacre floor screeders.


Floor Screeding Near Burslem

Also find: Longport screeding, Smallthorne screeding, Wolstanton screeding, Bradeley Village screeding, Bradwell screeding, Talke Pits screeding, Chesterton screeding, Middleport screeding, Hanley screeding, Newcastle-under-Lyme screeding, Stanfield screeding, Tunstall screeding, Longbridge Hayes screeding, Porthill screeding, Dimsdale screeding services and more.

Floor Screeding Services Burslem

Find Floor Screeding in Burslem Here
Screeding Services in Burslem Staffordshire (01782)
  • Burslem Liquid Screeds
  • Burslem Floor Levelling
  • Burslem Polished Screed Floors
  • Burslem Indistrial Floor Screeding
  • Burslem Floor Damp Proofing
  • Burslem Floor Insulation
  • Burslem Domestic Floor Screeding
  • Burslem Screed Calculator Service
  • Burslem Fibre Reinforced Screeding
  • Burslem Floor Screeding
  • Burslem Screeding Advice
  • Burslem Fast-Dry Floor Screeding
  • Burslem Screeding Services
  • Burslem Cheap Floor Screeding

Around Burslem

Households in Rosvean Close, Chell Street, Furnival Street, Sytchmill Way, Blake Street, Lingard Street, Odell Grove, Holder Street, Bridgewater Street, Moorland Road, Brown Street, Cross Hill, Century Street, Mayer Bank, New Street, Duncalf Street, Flintsham Grove, Winifred Street, Grange Street, Bellingham Grove, Bournes Bank, The Coppice, Evans Street, Remer Street, Kirby Street, Crane Street, Eastbank Road, have needed floor screeding just recently. Screeding work was also undertaken in the following Burslem area postcodes: ST6 1BY, ST6 4AQ, ST6 3AJ, ST6 3BX, ST6 1AB, ST6 2AA, ST6 3EW, ST6 1AQ, ST6 3DL, ST6 4GD.

To obtain local Burslem info go here

Screeding Jobs Burslem: Find screeding jobs in Burslem by clicking here: Burslem Screeding Jobs

Floor screeding in ST5 area, (dialling code 01782).

TOP - Floor Screeding Burslem