Floor Screeding Gatley

Gatley Screeding & Floor Levelling Services

Floor Screeding Gatley Greater Manchester (SK8): A professional floor screeder can assist with renovations, help install underfloor heating or level an uneven or damaged floor on your Gatley property, when necessary. A screed is used to generate a smooth floor on top of a rough concrete sub-base and provide a good foundation for you final flooring material. The screeding is an important process to guarantee a durable and quality finish to the entire floor surface.

Free Gatley Floor Screeding Quotes


An established screeding contractor in Gatley will have all the experience and knowledge to help you achieve a perfect floor in whichever shape or size of room you are working on. They'll assess your project and figure out the correct type of screed you need and how best to apply it.

Floor Screeding Gatley Greater Manchester (SK8)

They'll additionally assess if a structural engineer is required to ensure that any flex strength, point loadings and load requirements are met as set out in the building regulations.

The skills and training that a certified screeding specialist brings to your project will guarantee a high quality end result and help to lengthen the life of your floor or floors. Picking the right screeding materials and the method of installation is crucial if you want to end up with a durable and quality finish for your floor.

Ensure you get 2 or 3 quotations for your Gatley screeding project and also ask what standard of finish each quote is for. The quotation might be based on what's known as the Surface Regularity, or SR calculation. Each of the three SR levels deliver different levels of finish, with SR1 being the highest quality, with the smallest amount of deviation over the area of the floor. An SR2 or SR3 standard might mean there will be flat spots or ridges that may cause issues when laying your final flooring materials.

Floor Screeders Gatley (0161)

British Standards BS8204 sets down the guidelines and regulations that all Gatley screeding contractors must follow, and if using specialist screeding solutions, (Flowcrete, Gypsol, Cemfloor etc), they should be accredited by the manufacturers as being skilled and trained in their use. A contractor holding such accreditation demonstrates that they've been trained and assessed in using these products and can deliver a high quality service in all areas of their installation.

For the screeding of floors in hospitals, shopping centres, warehouses, schools, factories and hotels, specialist commercial screeders in Gatley will be required.


Standard Screeds - This is perfect for basic domestic usage and comprises a mixture of cement and sand. 5 parts sand to 1 part cement is the usual mixture for standard flooring screeds. After being laid a standard screed dries out at a rate of just 1mm/day.

Polymer Screeds - Provides a high level of strength with a minimal thickness. Polymer screeds are available from a number of screed manufacturers and because of their different chemical compositions have specific curing times for each individual product.

Fibre Reinforced Screed - The preferred option for professionals where underfloor heating is being installed in domestic homes in Gatley. This is because of the increased durability and protection against thermal shrinkage and cracking offered by the special fibres within the screed. At about 1mm per day, it has the same drying rate to standard screed.

Advanced Drying and Fast Drying Screeds - If you have to use the area in question at the earliest opportunity a fast drying screed may be used. Drying out at a rate of three to seven millimetres, depending on the mix, they're generally a fibre reinforced kind of screed and are great for flooring projects that have tight deadlines.

Industrial and Heavy Duty Screed - Developed for maximum strength and durability on floors where traffic is expected to be high or specific loading of the floor base is needed.

Screeding Quotes Gatley Greater Manchester

Self-Levelling or Liquid Screeds - Used to produce a high quality finish, especially where SR1 levels are necessary, by a latex and cement mixture. Mainly used to finalise a damaged floor or poor substrate level in order to lay a brand new flooring surface, like tiling on top of it. Even with a thickness of just one millimetre, the latex polymers within the mixture provide a high strength screed for a wide variety of uses.


Screeding installers will have to prepare all areas prior to any other work in order to guarantee a high quality and hard wearing screed flooring. Any oil, grease, debris and paint on the existing floor level can affect the bonding of the screed, and should be eliminated.

Screeding Near Gatley (SK8)

Any cleansing chemicals that are used during this stage should leave no residues, and the floor surface must be permitted to dry out naturally. If screeding over a cement or stone floor then all cracks should be repaired to prevent them from "travelling" up through a screed layer and producing imperfections on the finished surface. During an on-site survey the screeding installer will ascertain what preparation work is required before any actual screeding starts.

To protect the flooring materials and screeding layer from dampness rising up through the ground, a DPM (damp proof membrane) must be laid. The damp proof membrane is made out of thick polythene and various layers could be used to serve as a moisture barrier for the screeding.

Another airtight barrier might be necessary if your property is in an area that is regarded as susceptible to radon gas emissions. This could be just a simple airtight membrane, or in more serious instances an extraction and ventilation system will be installed under the screed to draw out any influx of radon gas from the ground.

Once the base has been properly prepared and any membranes installed, a sealant or primer is then put on. Primers and sealers help the bonding process and are special applications specifically designed for the type of screed that's being applied. Equipment such as airless sprays will usually be used to apply a sealant or primer, by experienced screeding installers in Gatley observing the manufacturer's guidelines and safety advice.

Under floor heating can now be installed and tested before screeding is poured. Insulation panels can be arranged and the heating pipes and cables will be firmly attached so there's no movement while the screed is applied. When skillfully installed an underfloor heating system is an efficient way to warm a room and good quality screed will retain its heat, creating an even level of warmth across the floor.

Floor Screed Gatley (0161)

If you're not putting in underfloor heating the screed can now be mixed and prepared in situ and laid. Your screeding contractor will give you advice on which screed type is suitable for your requirements, in line with your intended use of the room. Remember that even quick drying and advanced screeds have a minimum of 24 hours before you can walk over any laid surfaces and a minimum three days before any flooring can be fitted. Manufacturer's drying instructions for standard and heavy duty screeds must be followed so as to achieve a quality finish and provide an even and stable surface.

The SR level of your screeding can be confirmed once it's solidified sufficiently to be walked on. Through the use of a 2m straight-edge the floor surface is checked for any dips, deviations and ridges in the surface of the screed.

  • SR1 - Deviations of 3mm or less being measured across the whole area shows your screed floor to be of the finest quality and specified as SR1.
  • SR2 - SR2 is the classification for standard floors in commercial and industrial projects and can deviate from the straight-edge by up to 5mm.
  • SR3 - SR3 is basic utility standard where a quality finish is not required. This specification can have a maximum permissible deviation of 10 millimetres.

If you require load bearing checks, a structural engineer is necessary to carry out the tests. This test will determine the overall strength of the screed and the viability for its proposed use. The screed could be subjected to a "drop hammer test" to gauge flexibility and strength in specific areas. Only experienced structural engineers following the BS8204 guidelines are allowed to carry out these testing and sign off on the structural safety of screed flooring. (Tags: Floor Screeding Gatley, Floor Screeding Services Gatley, Screeding Gatley, Floor Screed Gatley).

Floor screeding services are available in Gatley and also in nearby places like: Didsbury, Bramhall, Cheadle Hulme, Northenden, Heaton Norris, Heaton Mersey, Heald Green, East Didsbury, Parrs Wood, Adswood, Withington, Davenport, Cheadle Heath, Barlow Moor, Cheadle, and in these postcodes M22 4SW, SK8 4NG, SK8 4EA, SK8 4DW, M22, SK8 3GQ, SK8 1JH, SK8 4LR, SK8 4GR, SK8 4PN. Locally based Gatley floor screeders will probably have the telephone code 0161 and the postcode SK8. Simply click the "quote" form or banner to get information on screeding services in your location.

Book a Screeder in Gatley UK

Related Tasks

Screeding Related Tasks Gatley

There are a number of different tasks that can be completed by your local Gatley floor screeder including floor levelling, floor renovation, damp proof membranes, floor preparation in Gatley, fibre reinforced floor screeding, screeding advice Gatley, waterproof screeding Gatley, shop floor screeding, basement screeding in Gatley, rapid strength floor screeds, concrete pumping, floor screed testing in Gatley, liquid screeds, self-levelling screeding in Gatley, floor screeding tools Gatley, floor screeding Gatley, industrial screeding Gatley, polished floor screeding Gatley, and more floor screeding tasks.


Floor Screeding Near Gatley

Also find: Davenport screeding, Barlow Moor screeding, East Didsbury screeding, Parrs Wood screeding, Heaton Norris screeding, Heald Green screeding, Cheadle Heath screeding, Cheadle screeding, Heaton Mersey screeding, Didsbury screeding, Withington screeding, Cheadle Hulme screeding, Northenden screeding, Bramhall screeding, Adswood screeding services and more.

Floor Screeding Services Gatley

Find Floor Screeding in Gatley Here
Screeding Services in Gatley Greater Manchester (0161)
  • Gatley Underfloor Heating Installations
  • Gatley Domestic Floor Screeding
  • Gatley Floor Insulation
  • Gatley Liquid Screeds
  • Gatley Floor Screeding Advice
  • Gatley Screed Calculator Service
  • Gatley Floor Levelling
  • Gatley Floor Screeding
  • Gatley Fibre Reinforced Floor Screeding
  • Gatley Floor Damp Proofing
  • Gatley Commercial Floor Screeding
  • Gatley Cheap Floor Screeding
  • Gatley Screeding Services
  • Gatley Polished Screed Floors

Around Gatley

Households in Park Mount, Rimsdale Close, Delamere Road, Hawthorn Road, The Tarns, Gainford Avenue, Linksway, Cranston Grove, Foxland Road, Millom Place, West Drive, Mount Grove, Greenbank Avenue, Church Road, Brogden Drive, Firswood Mount, Torkington Road, Crummock Road, Darley Avenue, Eskdale, Kenwood Avenue, Rutland Close, Silverdale Road, Alcester Road, Cedar Road, Cambridge Road, have needed floor screeding recently. Screeding work was also completed in these Gatley area postcodes: M22 4SW, SK8 4NG, SK8 4EA, SK8 4DW, M22, SK8 3GQ, SK8 1JH, SK8 4LR, SK8 4GR, SK8 4PN.

Gatley Screeding Jobs: Get floor screeding jobs in Gatley by clicking here: Gatley Screeding Jobs

If you need local info about Gatley, Greater Manchester click here

Floor screeding in SK8 area, 0161.

TOP - Floor Screeding Gatley